Inside the City of Shelbyville (2025 population 21,204), the Planning and Building Department at City Hall, 44 West Washington Street (317-392-5102), issues improvement location permits, building permits and electrical, plumbing and mechanical permits, inspects the work and registers contractors for the city’s Building Commission. New homes and additions are charged $0.13 per square foot, building and ILP permits usually take 3 to 5 days, and every new house pays a parks and recreation impact fee of $1,470.81 from February 1, 2026.
What requires a building permit in Shelbyville?
Shelbyville’s fee schedule shows the work the department permits: new primary and accessory structures and additions, residential and commercial remodeling, wrecking, signs, and separate electrical, plumbing and mechanical permits. The city counts gazebos, mini barns, porches, decks, pools, pool houses, carports, garages and any other outbuilding as residential accessory structures, and treats churches, institutional and multi-family buildings as commercial.
Permits the city issues
- Building permits for new structures, additions and remodels
- Improvement location permits, $50 per structure for residential work, sometimes without a building permit
- Electrical, plumbing and mechanical permits, each on its own application
- Fire permits, wrecking permits and permanent or temporary sign permits
- Right-of-way cut permits for work in city streets
No permit, but rules apply
- Fences need no permit, but they must follow the fence standards in the Unified Development Ordinance
- An ice shield on a roof is not required, though the city recommends one
An improvement location permit is issued only if the project meets the zoning ordinance, the subdivision control ordinance and other city rules, and where Article 8 of the zoning ordinance calls for a site development plan, that review must be finished first. A pool permit needs a safety feature: an automatic pool cover or a fence at least 4 feet high around the pool.
What Shelbyville decides and what the state holds
The city’s Building Commission has adopted the building codes set by the state, so the technical rules are Indiana’s. The city sets its own fees, impact fee, contractor registration and licensing (Chapters 152, 154 and 155 of its code), zoning and design criteria; it lists a 30-inch frost depth, a 20 psf ground snow load and seismic design category B. Class 1 projects put the State Design Release number on the city application.
Shelbyville building department: who handles permitting
The Planning and Building Department handles permits, contractor registrations, building inspections, code enforcement, planning and zoning, and staffs the Plan Commission, Building Commission, Board of Zoning Appeals and the Architectural Control Committees. Adam Rude is the Planning Director. Land outside the city limits is permitted by the Shelby County Building Inspector, whose page lists the city’s department as the contact for property inside Shelbyville.
Short on time to read all of this?
Get a free quote →| Detail | Information |
|---|---|
| Office | Planning & Building Department, first floor of City Hall, 44 West Washington Street, Shelbyville, IN 46176 |
| Phone | 317-392-5102 (City Hall main line 317-398-6624) |
| Online | Citizenserve portal for permits, contractor and landlord registrations, code enforcement and Plan Commission/BZA filings |
| Building Commission | Second Wednesday, 11:30 a.m.; appeals and contractor licensing |
| Plan Commission | Fourth Monday, 7:00 p.m., City Hall |
| Board of Zoning Appeals | Second Tuesday, 7:00 p.m., City Hall |
The Building Commission has seven voting members appointed by the Mayor for four-year terms: a registered building contractor, a Class I electrical contractor, a licensed plumbing contractor, a registered HVAC contractor, a building designer, a citizen and a utility representative, with the Building Commissioner sitting without a vote. It hears appeals under Section 152.16, acts as the hearing authority for minimum housing and unsafe buildings, approves the department budget and recommends fee and ordinance changes to the City Council.
The city is also working through a proposal to apply city zoning to land just outside its limits (an extra-territorial planning jurisdiction), area by area, with a Plan Commission hearing for each area before any decision.
Shelbyville permit types
The department posts a separate application for each permit and keeps both 2026 and 2027 versions online; the 2027 set adds a stand-alone wrecking permit application, and both sets include a fire permit application. The Improvement Location and Building Permit Application covers the zoning and building permits together; it asks for the owner and contractor, the parcel number, the State Design Release number where one applies, the type of work and frame, the value of construction, and square footage by area, counting heated and unheated space alike (garages, basements, porches and decks).
Residential permits
- New homes and additions: priced by square foot; a homeowner doing the work ticks the homeowner box and files a Homeowner’s Affidavit.
- Remodeling: priced by the value of construction, from $50 at $5,000 or less to $250 over $100,000.
- Engineered lumber: state law (IC 22-11-21) requires the application to say whether engineered floor joists, roof trusses or I-joists are used, and where.
- Pools: the application records the pool’s safety feature.
- Wrecking: $50 per residential structure.
Building or remodeling a home here? Alliance handles residential permit applications, so the crew isn't waiting on the counter.
Not sure this scope needs a permit?
Get a free quote →Commercial permits
Commercial and industrial new construction is $0.15 per square foot, and a foundation release issued separately is $100 plus $0.15 per square foot. Commercial remodels are $150 plus $0.05 per square foot, and commercial trade permits have their own base fees, including electrical service charges that rise with amperage.
For tenant improvements and new commercial builds, Alliance handles commercial building permits through issuance. More on this: commercial building permits explained.
What comes before the building permit
- Site development plan. Required under Article 8 of the zoning ordinance where it applies, before the ILP.
- Zoning relief. Variances and special exceptions go to the Board of Zoning Appeals; rezonings, plats and conditional uses to the Plan Commission, which publishes 2026 filing and meeting dates.
- Driveway and right-of-way. The application asks for driveway approval where applicable, and any cut in the right-of-way needs a permit pulled by a contractor registered with the City Engineer’s Office.
- Flood hazard information. Required on the application for property in a flood hazard area.
- State Design Release. Class 1 work needs the state release, and the form asks for its number.
Shelbyville permit costs and fees
The Building Commission adopts the Building Department fee schedule, posted on the city site as the 2027 schedule. Re-inspections cost $50 for the first and $50 plus $25 for each one after that, and must be paid before further inspections or a certificate of occupancy.
| Work | Fee |
|---|---|
| New construction and additions, residential | $0.13 per sq ft; minimum $50 |
| New construction and additions, commercial or industrial | $0.15 per sq ft; minimum $50 |
| Residential remodel by value | $50 to $5,000; $100 to $25,000; $150 to $50,000; $200 to $100,000; $250 over $100,000 |
| Commercial remodel | $150 + $0.05 per sq ft |
| Improvement location permit | $50 residential; $100 commercial or industrial |
| Plumbing | $50 residential / $200 commercial for the first 4 fixtures, + $2 per fixture |
| Electrical, new house | $110 up to 1,700 sq ft; $130 to 2,700; $150 to 3,700; $170 above |
| Electrical, accessory building / service upgrade / reconnect | $55 / $75 / $25 |
| Electrical, commercial | $100 base + $10 per 100 amps of entrance equipment; $10 per sub-panel; $5 per motor or circuit; $15 per sign or light pole |
| Electrical, industrial (by service size) | $250 up to 800 amps; $500 to 1,600 amps; $750 above |
| Mechanical, residential | $50 per HVAC system; $20 each additional |
| Mechanical, commercial | $100 minimum; rooftop units $100 to $200 by tonnage; $150 per refrigeration system or kitchen exhaust |
| Wrecking | $50 per residential structure; $200 commercial |
| Parks and recreation impact fee, each new residential unit | $1,470.81 from February 1, 2026; $1,514.93 from February 1, 2027 |
Rather talk it over?
Call 1-855-478-4290 →Worked example from the schedule: a new house with 2,000 square feet (garage and porches included) pays 2,000 × $0.13 = $260 for the building permit and $50 for the ILP, plus the $1,470.81 parks impact fee in 2026, for $1,780.81 before trade permits. The impact fee is charged when the building permit issues. Plan Commission and BZA filing fees are on a separate schedule codified in the city code.
Trade permits and who may pull them
Shelbyville registers building, mechanical and plumbing contractors and licenses electricians through its Building Commission, and only a registered contractor of that trade may obtain the permit. All registrations end on December 31 and lapse early if the insurance or bond on file expires, which suspends that contractor’s open permits.
- Building and mechanical contractors: $50 a year, a certificate of general liability insurance and a signed $10,000 surety bond payable to the City of Shelbyville.
- Electrical: contractors pay $150 ($100 to renew), post the bond and show a passing Block and Associates exam or an accepted equivalent; journeymen register for $75 and apprentices for $50. A letter from another jurisdiction proving a passed exam must be dated within 60 days of applying, and a journeyman may work only under an active contractor on a permitted job.
- Plumbing: contractors pay $100, post the bond and show an active State of Indiana plumbing contractor license; journeymen pay $50 and apprentices $25, registered under a contractor.
- Right-of-way work: contractors register with the City Engineer’s Office for $50 with the same bond.
Rather not deal with the building department?
Get a free quote →A homeowner who owns and lives in the house may take out building, plumbing and mechanical permits without registering. For electrical work the homeowner must first pass an open-book exam, given at the Building Commission office at 8 a.m. on the second Wednesday of each month, with a score of at least 80%, to hold a “Limited Contractor” license for that house only; the fee table lists a $100 residential homeowner’s license.
How to apply for a Shelbyville building permit
Property outside the limits goes to the Shelby County Building Inspector.
Each contractor registers with the Building Commission before any permit application; a homeowner files the affidavit instead.
Finish any site development plan review, variance or Plan Commission approval first.
Attach the site plan, floor plans, wall sections, driveway approval, flood information and any State Design Release.
Each registered trade contractor files its own electrical, plumbing or mechanical application.
Use Citizenserve or file at City Hall, 44 West Washington Street.
Review, corrections and what causes delay
Building, ILP and right-of-way permits typically take 3 to 5 days, and the city says the longer reviews are the more complex projects checked against building and zoning codes; most other permits issue immediately. An unregistered contractor stops an application, because only registered contractors may apply, and the department can fine anyone found working unregistered.
Inspections and certificates in Shelbyville
The permit holder must call the department (317-392-5102) for every required inspection, including the final. Electrical, plumbing and mechanical contractors working under a building permit are asked to coordinate with the building contractor so inspectors can cover several trades in one visit. Missing the final inspection can bring fines, a restricted or forbidden occupancy and disconnected utilities.
A certificate of occupancy is issued only for new construction. After the building final, Planning and Zoning inspects for zoning compliance, and the Building and Planning Departments then issue the certificate, usually 1 to 2 days later, for pickup at City Hall. A remodel gets no certificate, but it still has to pass a final inspection before the space is used.
Indiana building code in Shelbyville
FEMA’s Community Status Book lists the City of Shelbyville (community 180236) as participating in the National Flood Insurance Program, with flood maps effective June 20, 2024, the same date as the maps for unincorporated Shelby County. Property in a flood hazard area must include flood information with the building application.
Want this handled start to finish?
Get a free quote →Before construction starts on a Class 1 structure — one used by the public, by three or more tenants, or by anyone working as another’s employee — Indiana requires a state Construction Design Release, unless the work is exempt under 675 IAC 12-6-4. One- and two-family dwellings and qualifying townhouses are Class 2 and are permitted locally where an ordinance requires it. Indiana enforces the 2014 Indiana Building Code and the 2020 Indiana Residential Code. Class 1 and Class 2 in Indiana
Shelbyville building permit FAQs
Do I need a permit for a fence in Shelbyville?
No, but the fence must meet the standards in the Unified Development Ordinance.
How much is a building permit for a new house?
$0.13 per square foot plus a $50 ILP; a 2,000-square-foot house is $310, plus the $1,470.81 parks impact fee and trade permits.
Can I do my own electrical work?
Only in a house you own and live in, and only after passing the city’s open-book homeowner exam with at least 80%.
How long does a permit take?
Building, ILP and right-of-way permits typically take 3 to 5 days; most other permits are issued immediately.
Will I get a certificate of occupancy for a remodel?
No. Certificates are issued only for new construction, though a remodel still needs a passed final inspection.
What frost depth and snow load does Shelbyville design to?
The city’s design criteria give a 30-inch frost line, a 20 psf ground snow load and seismic design category B; roof ice shield is recommended but not required.
Who decides rezonings and plats?
The Shelbyville Plan Commission, an advisory plan commission of ten appointed members that meets on the fourth Monday of each month at 7:00 p.m.
When does the Board of Zoning Appeals meet?
The second Tuesday of each month at 7:00 p.m. at City Hall.
Shelbyville permit search and official resources
The city is moving permits and other department records to Citizenserve, which it says will give easier access to the public records the department keeps; the department at City Hall keeps the permit and inspection records for every address in the city. Annual reports summarize each year’s cases and permit activity.
Inspections are where schedules slip.
Get a free quote →- Shelbyville Planning & Building Department
- Permit applications and contractor registration
- Building Department fee schedule
- Fees, fines and certificates of occupancy
- Improvement location and building permit application (2027)
- Improvement location and building permit application (2026)
- Building codes and design criteria
- Building Commission
- Plan Commission
- Board of Zoning Appeals
- Extra-territorial planning jurisdiction proposal
- Shelby County Building Inspector (outside city limits)
- FEMA Community Status Book, Indiana
Simplify Shelbyville permitting with Alliance Permitting
Alliance Permitting is a permit documentation and submission company in Indiana. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Shelbyville sooner?
Let Alliance prepare, file, and track your Shelbyville permits while your crew stays on the job.
More Indiana permitting guides
Shelby County
Read guide →Johnson County
Read guide →Rush County
Read guide →South Bend Building Permit Guide
Read guide →Spencer County Building Permit Guide
Read guide →St. John Building Permit Guide
Read guide →This guide is provided by Alliance Permitting for general information about Shelbyville permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.