Belmont County, with its seat at St. Clairsville and 64,434 people in the Census Bureau’s 2025 estimate, runs no building department of its own. Commercial work under the Ohio Building Code in the unincorporated townships and in Flushing, Holloway, Shadyside and St. Clairsville is approved and inspected by the Mid-East Ohio Building Department at 22 North 5th Street, Zanesville (740-455-7905), which has no authority over one-, two- or three-family homes. Barnesville, Bellaire, Bridgeport, Brookside and Martins Ferry use the Southeast Ohio Building Department, and the county itself handles floodplain permits, county-road driveways and, through its health department, septic and well permits.
What requires a building permit in Belmont County?
In Belmont County the answer depends first on the kind of building. For commercial, industrial, public and multi-family buildings, the Ohio Building Code applies, and the Mid-East Ohio Building Department (MEOBD) says new construction, additions, alterations and changes of use on commercial property all need a plan approval, which is its word for the permit. Each structure on a site needs its own application, fees and certificate of occupancy.
MEOBD plan approval
- New commercial buildings and additions
- Alterations and changes of use or occupancy
- Fire alarm, sprinkler, kitchen hood and hood suppression systems
- Commercial HVAC replacement, re-roofing and generators
- Retaining walls, tents, construction trailers and pole lighting
- Fences over 7 feet at commercial sites
Outside MEOBD
- One-, two- and three-family houses and their garages and sheds
- Zoning approvals of any kind
- Septic systems and private wells (Health Department)
- Floodplain development (county floodplain administrator)
- Driveways onto county roads (County Engineer)
For houses, MEOBD states plainly that it has no authority over one-, two- or three-family dwellings, and the county does not list a residential building department among its offices. Use the Board of Building Standards look-up map to see whether any department certified for residential work covers a parcel; where no department certified for residential buildings has jurisdiction, the owner is not required to submit house plans (ORC 3791.04(A)(1)). Septic, well, floodplain and zoning rules still apply to a house wherever they reach.
What Belmont County decides and what the state holds
The building codes and the certification of departments are state matters. What the county controls is the floodplain program for unincorporated land, the county road right-of-way, the health department’s sewage and water rules, and the approval of new lots through the commissioners and the Belmont County Planning Commission. Cities and villages zone inside their limits, and St. Clairsville requires a city permit before construction starts on the projects its 2025 notice lists.
Belmont County building department: who handles permitting
Two regional building departments and the state share commercial work in the county, and the line follows municipal boundaries. MEOBD, run out of Muskingum County’s offices in Zanesville, is a state-certified commercial department that also serves Coshocton, Guernsey, Morgan and Perry counties; its chief building official is Jason R. Baughman, P.E. The Southeast Ohio Building Department (SEOBD), based in Washington County, serves several Belmont County municipalities.
Short on time to read all of this?
Get a free quote →| Place | Department |
|---|---|
| Unincorporated townships; St. Clairsville city; Flushing, Holloway and Shadyside villages | Mid-East Ohio Building Department, 740-455-7905 |
| Martins Ferry city; Barnesville, Bellaire, Bridgeport and Brookside villages | Southeast Ohio Building Department, 740-374-4185 |
| Belmont, Bethesda, Fairview, Morristown, Powhatan Point, Wilson and Yorkville villages | State of Ohio, Division of Industrial Compliance, 614-644-2223 |
The two departments’ own lists disagree on two villages. SEOBD’s June 2023 listing puts Holloway under the state and Fairview with MEOBD, while MEOBD’s newer October 2024 list does the reverse; ask MEOBD before filing in either village. SEOBD’s listing prints a date beside each town: Barnesville in 2012, Bellaire and Bridgeport in 2017, Martins Ferry in 2018 and Brookside in 2020. Neither list says which, if any, of these towns have residential certification.
| Detail | Information |
|---|---|
| Commercial plan approval | Mid-East Ohio Building Department, 22 North 5th Street, Zanesville; Monday to Friday 8:00 a.m. to 4:30 p.m. |
| Septic and private water | Belmont County Health Department, 68501 Bannock Road, St. Clairsville; 740-695-1202; Monday to Friday 8:30 a.m. to 4:30 p.m., closed 12 to 1 |
| County roads and driveways | Belmont County Engineer, 101 West Main Street, St. Clairsville; 740-699-2160; 8:30 a.m. to 4:30 p.m. weekdays |
| Floodplain (unincorporated) | Verdantas, contracted floodplain administrator, 740-212-4950; Commissioners’ office 740-699-2155 |
| St. Clairsville zoning and city permits | Office of Planning and Zoning, 100 North Market Street; 740-695-1953 |
To work out which office covers a parcel, find it on the county’s GIS map, note whether it lies inside a city or village, then check the Board of Building Standards look-up map and the MEOBD jurisdiction list. The County Engineer states that it has no say over building permits or inspections.
Belmont County permit types
MEOBD takes one Plan Approval Application for each structure, online or at its Zanesville office. The form asks for the project scope, exact address, estimated cost, the nature of the work (new, addition, alteration or change of occupancy), current and proposed use, construction type, use group and square footage by floor, and it lists the other approvals the owner must get locally.
Residential permits
No county department reviews house plans, and MEOBD does not touch one-, two- or three-family homes. A house project in Belmont County still involves the Health Department for a septic system or well, the County Engineer for a driveway onto a county road, the floodplain administrator in a mapped flood area, and the city or village for zoning; St. Clairsville’s 2025 notice lists new homes, additions, decks, fences, walls, pools (temporary ones included), garages, sheds, driveways, sidewalks and signs as needing a city permit. Inside the five SEOBD towns, ask SEOBD what it reviews for houses.
Not sure this scope needs a permit?
Get a free quote →Building or remodeling a home here? Alliance handles residential permit applications, so the crew isn't waiting on the counter.
Commercial permits
Commercial drawings must be sealed by an Ohio-licensed design professional, with limited exceptions. Submit digital plans or three printed sets with a site plan; civil drawings are not needed for approval, and a general contractor does not have to be named at submission. Fire alarm, fire suppression and truss drawings are normally deferred submittals, and MEOBD will issue a foundation-only approval to let site work start. Design for a frost depth of 36 inches; the snow load varies across MEOBD’s region, so check the Ohio Building Code map for the site.
For tenant improvements and new commercial builds, Alliance handles commercial building permits through issuance. More on this: commercial building permits explained.
What comes before the building permit
- Zoning. MEOBD has no zoning authority; the city, village or township decides. St. Clairsville asks applicants to find the zoning district, meet the Planning and Zoning Administrator and bring a simple plot plan.
- New lots. Since a memorandum of understanding signed on July 1, 2026, the commissioners and the Planning Commission send every new lot proposal to the Health Department, which reviews sewage and water and sends written recommendations within a specified timeframe. It also covers new lots in cities and villages without public sewer.
- Septic and wells. The Health Department permits new, altered and replacement household sewage systems for one- to three-family homes, and any new, altered or sealed private water system.
- Floodplain. Development in a mapped flood hazard area of the unincorporated county needs a flood hazard area development permit under the county’s special purpose flood damage reduction resolution.
- Roads and stormwater. A driveway onto a county road needs a County Engineer permit; township roads belong to the townships and state routes to ODOT. The MEOBD application also lists stormwater runoff, plumbing and fire department approvals as separate.
Belmont County permit costs and fees
Commercial plan approval fees in the MEOBD area come from the department’s fee schedule revised in November 2025. Fees are paid when the application is filed, and plans are not reviewed until they are paid; areas are rounded up to the next 100 square feet. State law adds a Board of Building Standards assessment of 3% of nonresidential fees (ORC 3781.102); the schedule shows no separate line for it, so ask MEOBD how it is collected. SEOBD and the state set their own fees.
Rather talk it over?
Call 1-855-478-4290 →| Work | Fee |
|---|---|
| Structural | $250 processing + $10.50 per 100 square feet (fences over 7 feet: per 100 lineal feet) |
| Mechanical | $250 + $8.25 per 100 square feet |
| Electrical | $250 + $8.25 per 100 square feet |
| Fire suppression | $250 + $8.25 per 100 square feet |
| Fire alarm | $250 + $8.25 per device |
| Direct HVAC replacement | $250 for up to 3 units, then $60 per unit |
| Kitchen hood; hood suppression | $375 each for the first hood, $125 per additional hood |
| Re-roof | $250 up to 50,000 square feet, plus $75 per additional 50,000 |
| Existing building certificate of occupancy; temporary occupancy | $350 each |
| Generator; outside pole lighting; industrialized unit | $375 each |
| Underground fire suppression | $360 |
| Retaining wall; tent; construction trailer | $250 each |
| Field inspection or re-inspection | $125 |
| Working without a plan approval | $500 fine |
Worked example from the schedule: a new 2,450-square-foot commercial building rounds up to 2,500 square feet, so the structural fee is $250 plus 25 × $10.50, or $512.50. Mechanical, electrical and fire fees are added for the systems the building includes. Card payments made online carry a 3% charge from the card processor.
County floodplain fees took effect on January 1, 2025: $100 for a structural permit application, $50 for non-structural work and $200 for a variance request, plus any costs of the hearing. The Health Department asks applicants to call for current sewage program fees.
Trade permits and who may pull them
On commercial jobs, MEOBD charges electrical, mechanical, fire suppression and fire alarm work under the same plan approval, and fire alarm, suppression, hood, gas pressure and HVAC systems must be pretested before the inspector arrives. Contractors doing commercial electrical, HVAC, hydronics, plumbing or refrigeration work need the Ohio Construction Industry Licensing Board license. No county page sets up local contractor registration, and none of the offices names a homeowner permit for trades.
- Plumbing: the MEOBD application lists the plumbing permit as a separate local approval; ask the Belmont County Health Department or the municipality where the job is.
- Septic installers: must be registered and bonded through the Ohio Department of Health, and the Health Department keeps the local list.
- Well drillers: private water system contractors register with the Ohio Department of Health before building, altering or sealing a well.
Rather not deal with the Belmont County building department?
Get a free quote →How to apply for a building permit in Belmont County
Use the county GIS map to see whether it is in a township, a city or a village.
Check the MEOBD jurisdiction list and the Board of Building Standards look-up map for commercial and residential authority.
Get the local zoning approval, and any new-lot review through the Planning Commission and Health Department.
Septic and well permits, a county-road driveway permit and, in a flood area, a floodplain permit.
Submit the MEOBD application online or in Zanesville with sealed plans, site plan and fee.
Revisions go in through MEOBD’s plan update link, using the plan approval number.
Review, corrections and what causes delay
MEOBD reviews every new application and revision during the week after it arrives, provided it is in by 4:00 p.m. on Friday; there is no walk-through or expedited review. Unpaid fees hold a submission, and an address that is not exact stops inspection scheduling. A plan approval lasts one year if work has not started, with two six-month extensions on written request, and it lapses if work stops for six months.
Inspections and certificates in Belmont County
MEOBD issues a list of required inspections with each approval. Book them at least 24 hours ahead by calling 740-455-7905 with the plan approval number, and pretest life-safety and gas systems first. All commercial property should hold a certificate of occupancy, issued once construction is finished and every required inspection has passed; a building that has none can get one with an application, a floor plan with square footage and room labels, and the existing-building fee.
The Health Department makes the final inspection of a new septic system and returns about a year later to check how it is working; operation permits expire and must be renewed. SEOBD and the state inspect the towns they cover under their own procedures.
Ohio building code in Belmont County
Every department working in the county enforces the same statewide codes; the difference from place to place is which department, if any, is certified for the address and for which type of building. FEMA’s Community Status Book lists unincorporated Belmont County (community 390762) as participating in the National Flood Insurance Program, with flood maps effective April 5, 2006; each city and village is listed separately from the county row.
Ohio has statewide building codes: the Ohio Building Code for commercial and other nonresidential buildings and the Residential Code of Ohio for detached one-, two- and three-family dwellings. Only departments certified by the Ohio Board of Building Standards may approve plans and inspect, and residential rules are uniform statewide. How Ohio’s statewide code works
Belmont County permit search and official resources
MEOBD keeps applications, plan approvals and certificates of occupancy back to its start in 1996; ask for them with a records request giving the business name and property address. County records, including floodplain files, are requested under the commissioners’ public records policy. Septic and well records are held by the Health Department.
Want this handled start to finish?
Get a free quote →- Mid-East Ohio Building Department
- MEOBD jurisdiction list by county (October 2024)
- MEOBD frequently asked questions
- MEOBD plan approval application and fee schedule
- MEOBD online building plan application
- Southeast Ohio Building Department
- SEOBD jurisdiction listing (June 2023)
- Belmont County floodplain program and fees
- Flood hazard area development permit application
- Special purpose flood damage reduction resolution
- Belmont County Health Department sewage treatment systems
- Belmont County Health Department private water systems
- Belmont County Engineer FAQ (driveways and roads)
- Belmont County GIS map
- Commissioners’ journal, July 1, 2026 (new-lot review agreement)
- St. Clairsville permits before construction (2025)
- Commissioners’ public records policy
- BBS building department look-up map
- Ohio Board of Building Standards
- Ohio Construction Industry Licensing Board
- FEMA Community Status Book, Ohio
Inspections are where schedules slip.
Get a free quote →Belmont County building permit FAQs
Does Belmont County have a building department?
No. Commercial work in the townships and four municipalities goes to the Mid-East Ohio Building Department in Zanesville; five other towns use the Southeast Ohio Building Department, and seven villages are listed under the state.
Do I need a building permit for a house in a township?
MEOBD has no authority over homes, and the county lists no residential department. Check the BBS look-up map; where no residential department has jurisdiction, house plans need no submission, but septic, well, floodplain and zoning rules still apply.
Who issues commercial permits in Martins Ferry or Bellaire?
The Southeast Ohio Building Department (740-374-4185), which also serves Barnesville, Bridgeport and Brookside.
How much does a commercial plan approval cost?
Structural review is $250 plus $10.50 per 100 square feet, so a 2,450-square-foot building pays $512.50 before mechanical, electrical and fire fees.
How long does MEOBD take to review plans?
It reviews submittals the week after they arrive if they are in by 4:00 p.m. Friday, and it offers no expedited review.
Who issues septic and well permits?
The Belmont County Health Department at 68501 Bannock Road, St. Clairsville (740-695-1202), for household sewage systems and private water systems.
Does the County Engineer issue building permits?
No. The Engineer handles county roads, rights-of-way and bridges, including driveway permits onto county roads.
Simplify Belmont County permitting with Alliance Permitting
Alliance Permitting is a permit documentation and submission company in Ohio. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Belmont County sooner?
Let Alliance prepare, file, and track your Belmont County permits while your crew stays on the job.
More Ohio permitting guides
Monroe County
Read guide →Harrison County
Read guide →Guernsey County
Read guide →Berea Building Permit Guide
Read guide →Bexley Building Permit Guide
Read guide →Blue Ash Building Permit Guide
Read guide →This guide is provided by Alliance Permitting for general information about Belmont County permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.