Skip to main content
Municipal GuideOhioCuyahoga County · Berea

Berea, Ohio Building Permit Guide

To get a building permit in Berea, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

Berea’s Building Department at City Hall, 11 Berea Commons, issues residential and commercial building, electrical, plumbing and HVAC permits, online through Community Connect or on paper by mail, email or the City Hall drop box.

Authority: Berea Building DepartmentFiling: Community Connect portalPhone: 440-826-5812
Authority
City Building Department11 Berea Commons
House addition
$100 + $0.10 per sq ftPlus 1% state fee
Contractors
$125 a yearNo bond required
Hours
Mon–Fri 8:30–3:30440-826-5812

Inside the City of Berea, permits come from the Building Department at Berea City Hall, 11 Berea Commons (440-826-5812), where Mike McCourt is the Certified Building Official and Zoning Administrator. The department reviews plans, issues building, electrical, plumbing and HVAC permits and inspects residential and commercial work. Apply online through Community Connect (CommunityCore) or file paper forms; a residential addition or alteration costs $100 plus $0.10 per square foot, plus the 1% state fee, and every contractor registers with the city for $125 a year.

What requires a building permit in Berea?

Berea’s rule of thumb is that most work needs a permit before it starts. Painting, carpeting, molding and similar cosmetic work are the exceptions the department names, and it suggests calling before any other project. In an emergency, work may begin first, but the permit must be pulled on the first business day afterward.

Permit needed

  • New houses, additions, alterations and renovations
  • Decks, patios, sheds, pergolas, trellises and retaining walls
  • Fences, driveways, aprons, sidewalks, walkways and garage floors
  • Roofing, siding, gutters, and door or window replacement
  • Waterproofing and water control work
  • Pools, hot tubs and decorative fountains
  • Electrical, plumbing and HVAC work, generators and solar panels
  • Sanitary or storm sewer replacement

No permit

  • Painting
  • Carpeting
  • Molding
  • Similar cosmetic work

Other city permits cover temporary signs, dumpsters and storage pods, work in the right-of-way, small cell wireless equipment, rain barrels and hydrant meters, each with its own form.

What Berea decides and what the state holds

Ohio adopts the building codes and certifies the departments that enforce them. Berea sets its own permit fees, which it prints on each application form, registers contractors, and runs zoning: its Zoning Code, last posted as updated July 16, 2026, requires a zoning use permit from the Zoning Administrator before land or a building is used or changed. The city also requires a yearly Certificate of Occupancy for buildings with three or more apartments, has a Heritage Architectural Review Board, and is listed by FEMA as a participating flood insurance community with maps dated December 3, 2010, on which no base flood elevations were determined.

Berea building department: who handles permitting

The Building Department processes permits and inspects new residential and commercial buildings, remodeling, alterations and additions, and also handles abandoned property inspections and leasing and multifamily permits. Mike McCourt is listed as the Certified Building Official and Zoning Administrator, so building code and zoning questions start at the same desk. The department still asks people to use the drop box in the City Hall foyer, which is open around the clock.

Short on time to read all of this?

Get a free quote →
Berea Building Department contacts
DetailInformation
OfficeBuilding Department, Berea City Hall, 11 Berea Commons, Berea, OH 44017
Phone440-826-5812
Emailbuildingdept@cityofberea.org
HoursMonday to Friday, 8:30 a.m. to 3:30 p.m.; drop box in the City Hall foyer open 24/7
Building OfficialMike McCourt, Certified Building Official and Zoning Administrator
Online portalCommunity Connect (CommunityCore), since May 3, 2021; Google Chrome required
City Hall main line440-826-5800

Berea permit types

Berea splits its applications into residential and non-residential sets, and each form prints its own fee formula. The Community Connect portal takes the same permit types online: new buildings, alterations, electrical, mechanical, plumbing, fire sprinkler, fire alarm and miscellaneous work. Online users either get added as a contractor by the city or self-register as a community member, then apply, upload plans, pay, track status and request inspections.

Residential permits

  • New homes use the New Home Construction Application, which lists the floor sizes, garage, lot size and every subcontractor, and adds site development, engineering, sewer and water charges (see fees).
  • Additions, alterations and renovations need two sets of drawings: site plan, floor plans, elevations and sections, and a description of the electrical, mechanical and plumbing systems. Remodeling drawings need not be architect-grade but should resemble the project floor by floor.
  • Miscellaneous work such as decks, fences, patios, roofs, siding, driveways, sheds and pools goes on one form, with a plot plan for most items.
  • Trade work uses separate electrical, plumbing and HVAC applications.

Commercial permits

Non-residential work starts with a plan approval application and then separate building, electrical, fire protection, HVAC and plumbing applications. A new business, a move or a change of tenant needs a Certificate of Zoning Use Permit and a Certificate of Occupancy Permit before opening. The zoning use permit is free and needs a written business plan; the occupancy permit needs a scaled floor plan showing exits, occupant load, room uses and fire extinguisher locations, and the Berea Fire Department inspects as well. Where Planning Commission approval is not needed, the Zoning Administrator acts on a zoning use application within 30 days. The non-residential alteration form also prices demolition at $100, roofing or siding at $100 plus $10 per 500 square feet, parking lot paving at $200 plus $4 per 1,000 square feet, and permanent signs at $100 plus $5 per 10 square feet.

Not sure this scope needs a permit?

Get a free quote →

What comes before the building permit

  • Planning Commission. Meets at 7:00 p.m. on the first and third Thursdays in Council Chambers and handles area variances, conditional uses, site plans, demolitions, lot splits, permanent signs, driveway widening, rezoning and administrative appeals. File the application, site plan, photographs and a letter of intent about three weeks before the meeting; paper copies must be in the Building Department by noon on the deadline, and commission material is not accepted through the online permit system.
  • Heritage Architectural Review Board. Review costs $35.
  • Site and utilities. New homes carry grading, engineering review and sewer and water charges on the application, and work in the street needs a right-of-way permit.

Berea permit costs and fees

Berea prints its fees on its application forms rather than in a separate schedule, and each residential form adds the 1% Board of Building Standards fee; the non-residential building form adds 3%. Ask the department to confirm the total before paying, as the department’s own pages advise; card payments online carry a percentage service fee.

Berea permit fees (from the city’s application forms)
WorkFee
New home: filing fee$200 + $0.15 per sq ft of gross floor area; $50 per accessory structure
New home: building fee$500 + $0.10 per sq ft of gross floor area
New home: site development$50 grading base + $0.02 per sq ft of lot; $300 engineering review; $1,000 refundable grading bond
New home: utilities$1,000 sanitary sewer; $1,000 storm sewer; $1,500 water usage; water meter extra
New home: driveway apron; occupancy$50; $10
Residential addition, alteration or renovation$100 + $0.10 per sq ft of work area
Residential miscellaneous item (deck, fence, roof, siding, shed, pool and similar)$50 per item
Electrical: new work / alteration$150 + $0.17 per sq ft / $50 + $0.16 per sq ft
Electrical: new service; panel; generator; solar$125; $50; $125; $125 + $0.12 per sq ft of array
Plumbing: new work / alteration; water heater$150 + $0.12 per sq ft / $50 + $0.11 per sq ft; $50
HVAC: new work / alteration; furnace, A/C or heat pump replacement$150 + $0.03 per sq ft / $50 + $0.02 per sq ft; $75 each
Non-residential alteration or renovation$500 + $5 per 100 sq ft, plus 3% state fee
Non-residential new building or additionSquare feet × a multiplier set by use group and construction type
Non-residential site and utility charges$2,500 grading bond deposit; $2,000 sanitary tap; $2,000 storm tap; $2,500 water tap
Non-residential occupancy$100 + $0.40 per 100 sq ft
Re-inspection$25 each

Rather talk it over?

Call 1-855-478-4290 →

Worked example from the addition form: a 20-by-20-foot room addition (400 square feet) is $100 plus 400 × $0.10, or $140, and the 1% state fee of $1.40 brings it to $141.40. Its electrical permit, on the same 400 square feet, is $150 plus $68, or $218 before the state fee. Planning Commission fees are separate. For one-, two- and three-family homes a variance is $50, a conditional use $100 and other applications $35 (subdivisions $35 a lot); for other buildings a variance is $75 and a conditional use $150, and other applications run from $250 for 4,000 square feet or less to $750 above 50,000 square feet. A zoning map amendment is $50, and public hearings need a $50 bond for mailing costs, which the city may raise if mailings cost more.

Trade permits and who may pull them

Electrical, plumbing and HVAC permits are separate applications, each priced by the square footage of the area where the work happens. Every contractor and subcontractor working in Berea must be registered with the city for the current year. Registration needs:

  • a RITA tax form for an individual or a business;
  • proof of insurance naming the City of Berea as an additional insured;
  • a $125 fee, which is not prorated;
  • for electrical, plumbing and HVAC contractors, a copy of the state license.

Berea does not require a bond. Registrations run from January 1 to December 31, so a project that crosses New Year needs registrations for both years. On request, the department will give owners its list of contractors registered for the current year, though the city does not recommend any firm. Commercial electrical, HVAC, hydronics, plumbing and refrigeration contractors hold their licenses from the Ohio Construction Industry Licensing Board. The certification on each permit form lets the owner or the owner’s authorized agent sign, so owners doing their own work should ask the department how it handles a homeowner application.

Rather not deal with the building department?

Get a free quote →

How to apply for a Berea building permit

1. Check zoning

Ask the Zoning Administrator whether the project or use is allowed, or whether it needs the Planning Commission first.

2. Register contractors

Each contractor registers for the year with the RITA form, insurance and the $125 fee.

3. Set up Community Connect

Register through the city’s CommunityCore link in Google Chrome, or pick up the paper forms.

4. Fill out the right application

Choose the residential or non-residential form for the building or trade, and fill in the square footage the fee is based on.

5. Submit plans

Upload them, email files under 25 MB, mail them, use the drop box, or leave large sets with Security at the City Hall entrance.

6. Pay and wait for approval

Pay online, by mail or through the drop box by check, and start work only once the permit is issued.

Review, corrections and what causes delay

The department’s pages differ on paper filing: the Building page lists mail, email, fax and the drop box, while the general permit page says its downloadable forms are filed in person, so call 440-826-5812 if unsure. Online, the portal’s help sheets cover resubmittals, reading plan review comments and what to do when the submit button is grayed out. Planning Commission material sent through the permit system is not accepted, so deliver or mail the paper copies to the Building Department instead.

Inspections and certificates in Berea

Every permit needs at least one inspection, and some need several; the department tells you which ones apply. Schedule at least 24 hours ahead, with the permit number ready, by phone at 440-826-5812 or through Community Connect, where you can also see results and cancel a request. The new home form states a $25 fee for each re-inspection.

Businesses cannot open until both the zoning use permit and the occupancy permit are issued, and the city warns that a business that opens without them may be closed until it gets them; plan inspections well before opening day. A new house pays a $10 occupancy fee on its application.

Owners of buildings with three or more apartments need a Certificate of Occupancy every year, a rule Berea City Council passed in 1965. Certificates expire on December 31, and owners renew with the multifamily leasing application and the fees.

Ohio building code in Berea

Berea’s Building Department applies the Ohio Building Code to commercial work and the Residential Code of Ohio to houses, and lists the codes it enforces on its Building page. The Board of Building Standards look-up map identifies the department with authority over a given address.

Want this handled start to finish?

Get a free quote →

Ohio has statewide building codes: the Ohio Building Code for commercial and other nonresidential buildings and the Residential Code of Ohio for detached one-, two- and three-family dwellings. Only departments certified by the Ohio Board of Building Standards may approve plans and inspect, and residential rules are uniform statewide. How Ohio’s statewide code works

Berea building permit FAQs

Do I need a permit to replace windows or a roof in Berea?

Yes. Both are miscellaneous residential items at $50 each, plus the 1% state fee.

What does a permit for a room addition cost?

$100 plus $0.10 per square foot, plus 1%; a 400-square-foot addition is $141.40, with trade permits extra.

Does Berea require contractors to be bonded?

No. Contractors register for $125 a year with a RITA form and insurance naming the city; electricians, plumbers and HVAC firms add their state license.

Can I apply online?

Yes, through Community Connect (CommunityCore) in Google Chrome, which also takes plans, payments and inspection requests.

What needs the Planning Commission?

Area variances, conditional uses, site plans, demolitions, lot splits, permanent signs, driveway widening and rezoning, among others.

How do I open a new business in an existing building?

Get a free zoning use permit and a Certificate of Occupancy before opening; the fire department also inspects.

Can I start emergency repairs without a permit?

Yes, but the permit must be obtained on the first business day after the emergency.

Berea permit search and official resources

Applicants follow their own projects, plan reviews and inspection results in Community Connect. For anyone else’s permit history, Berea takes public records requests through its NextRequest portal, in person at the City Hall Building Department counter, by phone or by mail; email copies and in-person inspection are free, and printed copies cost 5 cents a page past 20 pages.

Inspections are where schedules slip.

Get a free quote →

Simplify Berea permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Ohio. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Berea sooner?

Let Alliance prepare, file, and track your Berea permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Berea permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.