Skip to main content
Municipal GuideIllinoisSwansea · St. Clair County

Swansea, Illinois Building Permit Guide

To get a building permit in Swansea, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

Swansea’s Building & Zoning Department reviews plans, issues building and trade permits and inspects work inside the village, charging by the square foot from its posted fee chart.

Authority: Village of Swansea Building & Zoning DepartmentOffice: 1444 Boul AvenuePhone: 618-234-0044
Permit office
Building & Zoning1444 Boul Avenue, Swansea, IL 62226
Building fee
11 cents a sq ft$50 minimum; trades priced per sq ft too
Sewer tap
$1,000Single-family connection to village sewer
Occupancy permit
$100 + $30House inspection plus application fee

Inside the village, permits come from the Village of Swansea Building & Zoning Department at 1444 Boul Avenue (618-234-0044), which takes applications through its online permit center and accepts plumbing, electrical, reroofing and HVAC permits by fax. Building permits cost 11 cents a square foot with a $50 minimum, and every home needs an occupancy permit inspection when it changes hands or tenants.

What requires a building permit in Swansea?

Swansea lists the permits it issues rather than a general rule: residential and commercial building permits, electrical, plumbing, mechanical, fire prevention, grading, manufactured home, sign and solar panel permits. Its applications page gives plain examples of where the line falls.

Permit needed

  • New construction and additions to a home (building permit)
  • Electrical work such as a new or updated panel
  • Plumbing work such as relocating a vanity or toilet, or replacing a water heater
  • Reroofing and HVAC work (both may be filed by fax)
  • Every residential and commercial solar installation
  • Pools holding water over 24 inches deep, including hot tubs and spas
  • Signs, grading, demolition and manufactured homes
  • Sprinkler and fire alarm systems (Fire Department)

Also needed

  • An occupancy permit for any home at a change of tenant or owner
  • Zoning compliance or sign compliance certificates
  • Landlord registration for rentals
  • Business registration for a non-residential use

The fence handout sets the limits for yards: front-yard fences no taller than 36 inches and no more than one-third opaque, in plastic, wood or aluminum or iron rail; side and rear fences up to 6 feet, with side fences stopping at the front setback line. Fences may not go on dedicated drainage or rights-of-way; in utility easements they stand at the owner’s risk of removal, and trees are banned from all easements and rights-of-way.

What Swansea decides and what the state holds

The village adopts its own codes. Its fee chart lists the 2015 International Building, Residential, Mechanical and Fuel Gas Codes, the 2014 National Electrical Code, the 2006 International Fire Code and the Illinois State Plumbing Code; the solar handout cites the same editions, and the electrical handout describes a local “Swansea version” of the 2014 electrical code. The state supplies the plumbing code and plumber licensing, roofing contractor licensing, and the energy and accessibility codes.

Swansea building department: who handles permitting

The village’s Building & Zoning Department, led by Building & Zoning Director Dan Thomas, issues building, electrical, plumbing and mechanical permits, offers plan review, carries out building inspections and code enforcement, and handles records research requests. It also keeps current information on licensed and bonded contractors and on new projects coming into the village. Fire sprinkler and alarm systems are permitted by the Swansea Fire Department, and the Planning and Zoning Board oversees the village’s long-term plans and checks that projects fit them.

Short on time to read all of this?

Get a free quote →
Swansea permit contacts
DetailInformation
OfficeBuilding & Zoning Department, Government Center, 1444 Boul Avenue, Swansea, IL 62226
Phone618-234-0044 (department and code enforcement); Director 618-722-2207
Fax618-234-0222
Fire sprinkler and alarm permitsSwansea Fire Department, 144 Huntwood Road, 618-234-3291
SewerVillage of Swansea 618-234-0044 (press 1); St. Clair Township 618-233-3437; Caseyville Township 618-398-6248
Outside village limitsSt. Clair County Building & Zoning (see the St. Clair County guide)

Swansea permit types

Building, electrical, plumbing, mechanical and solar applications are filed through the village’s online permit center, linked from the Building & Zoning page; plumbing, electrical and reroofing permits, and HVAC permits, also have permit-by-fax forms. For permits that are not available online, the village asks applicants to contact the department. The village notes that each permit’s terms and fees are printed on its application.

Residential permits

  • Additions and new homes. A residential building permit covers both; plan review is part of the department’s service.
  • Solar panels. The installer must be active on the Illinois Commerce Commission’s utility company database. The application needs a plat of survey or site plan, a scaled roof plan with module layout, roof framing, covering and number of existing layers, roof access pathways (at least two 36-inch setbacks on separate roof planes, and 18 inches each side of a ridge, or 36 inches where the array covers more than 33% of the roof), mounting details, an analysis or drawing from an Illinois-licensed structural engineer, and a full electrical plan.
  • Pools. No pool may sit in a required front yard; pool walls stay at least 10 feet from rear and side lines and 25 feet from a side street line, behind a barrier at least 48 inches high with self-closing, self-latching gates.
  • Accessory buildings. Under the zoning code, accessory uses stay out of the required front yard, may sit as close as 5 feet to side and rear lines, are limited to 15 feet tall in residential districts, and together may cover no more than 30% of the required rear yard.

Commercial permits

Commercial building, sign, fire prevention and grading permits are on the village’s list. A planned business development uses the village’s submittal checklist, and the developer’s engineer files a hydraulic and hydrologic drainage summary with the drainage calculations and improvement plans, showing detention for the 10-year and 100-year storms. Non-residential uses register with the village, and sprinkler and alarm systems need a separate $100 Fire Department application.

Not sure this scope needs a permit?

Get a free quote →

What comes before the building permit

  • Zoning. Rezoning, text amendments, appeals, special uses and variations each carry a $225 application fee under Chapter 154.200; a certificate of zoning compliance costs $50.
  • Subdivision. Preliminary plats and plat amendments cost $500 plus $10 per lot (minimum $600), and improvement plans are billed at the cost of the Village Engineer’s review and inspections.
  • Floodplain. Wolf Branch and Richland Creek carry regulatory floodplains mapped as Zone A or Zone AE; ask the department before building near them.
  • Demolition. The application needs proof of ownership, a site plan, a demolition schedule, photos, a structural engineer’s report where the building abuts another, and the State of Illinois demolition, renovation and asbestos notification form.

Swansea permit costs and fees

The village’s posted Code Fee Chart, filed on its site as the 2026 chart, is headed “Permit Fees (Effective September 2018)”. Building and trade permits are charged per square foot, with a $50 minimum and $50 for each additional inspection. Sewer tap fees come from Title XV, Chapter 150.004 of the code and zoning fees from Chapter 154.200.

Swansea permit fees (Code Fee Chart, effective September 2018)
ItemFee
Building permit$0.11 per sq ft
Electrical / plumbing / mechanical$0.10 / $0.09 / $0.08 per sq ft
Fire$0.06 per sq ft
Minimum charge; each additional inspection$50; $50
Sewer tap: single family, each multi-family or manufactured home unit, church or school$1,000
Sewer tap: township taps$1,300
Sewer tap: commercial$1,500 for the first 1,200 sq ft plus $750 per additional 1,200 sq ft, maximum $5,000
Sewer inspection$25
Rezoning, text amendment, appeal, special use or variation$225 each
Zoning compliance / sign compliance certificate$50 / $50
Occupancy inspection: house, duplex or townhome / mobile home / apartment$100 / $75 / $50
Occupancy permit; re-inspection; modification$30; $50; $20
Fire sprinkler or alarm application (Fire Department)$100, final inspection included

Rather talk it over?

Call 1-855-478-4290 →

Worked example from the chart, with every fee figured on the same floor area: a 1,500-square-foot house pays $165 for the building permit (1,500 × $0.11), $150 electrical, $135 plumbing and $120 mechanical, $570 in permits, plus a $1,000 sewer tap where it connects to village sewer. Homes in the Ravenel Subdivision pay $1,200 per unit for the tap instead, and hotels and nursing homes pay $600 for the first 1,200 square feet plus $400 for each additional 1,200. The chart’s impact fee line is blank.

Trade permits and who may pull them

  • Electrical: Swansea enforces the 2014 National Electrical Code with local amendments: no aluminum or copper-clad aluminum branch-circuit wiring, no branch wire smaller than No. 12, a 100-amp minimum service, a copper ground wire in PVC conduit from meter to ground rod, and hard-wired, interconnected smoke and carbon monoxide detectors with battery backup in every dwelling (existing unaltered homes need the detectors but not the wiring).
  • Plumbing: permits cover jobs such as moving a vanity or toilet or replacing a water heater; plumbers are licensed by the Illinois Department of Public Health.
  • Mechanical and reroofing: HVAC and reroofing permits can be filed on the village’s fax forms; roofing contractors hold a state license from the Illinois Department of Financial and Professional Regulation.
  • Fire systems: sprinkler and alarm contractors give their Illinois license number on the Fire Department application, which is turned in at the Government Center.

The village’s pages do not set out a local contractor license or registration fee, but the department keeps current information on licensed and bonded contractors; ask it what an application needs. For solar work, the contractor schedules and attends every inspection and must have a ladder ready to reach the roof.

How to apply for a Swansea building permit

1. Confirm the parcel

Check that the property is inside the village; unincorporated land goes to St. Clair County Building & Zoning.

2. Check zoning

Look up the zoning district on the village zoning map and confirm setbacks; a variance or special use must be approved before the permit.

3. Read the handout

Use the solar, pool, fence or electrical handout to see what the plans must show.

4. Apply online or by fax

File through the online permit center, or send plumbing, electrical, reroofing or HVAC permits on the fax forms to 618-234-0222.

5. Add attachments

Include the site plan or plat of survey, plans, engineer’s analysis where required and the square footage the fee is based on.

6. Pay and post

Pay the fee printed on the application form; the department reviews the plans before the permit is issued.

Rather not deal with the building department?

Get a free quote →

Review, corrections and what causes delay

The village does not publish a review time. The handouts show what slows approval: solar plans without the roof pathways, structural engineer’s analysis or electrical diagram, pools drawn inside a required front yard or less than 10 feet from a side or rear line, and projects that first need a zoning variance or special use hearing. Development drainage plans with missing or incomplete data on the engineer’s summary sheet can be delayed, as the summary sheet itself warns.

Inspections and occupancy in Swansea

The handouts list the inspection stages. A pool is inspected at the footing excavation before concrete, at rough-in electrical (under-pool grounding and the bonding loop and conduits under walks), at rough-in mechanical, and at final electrical, final mechanical and final building, which covers the deck and fencing and must pass before the pool is used. Solar arrays are checked at rough framing and racking before modules go on, at the electrical service before reconnection, and at final building and final electrical. The fee chart charges $50 for each additional inspection.

Under the Property Maintenance Code (Ordinance 1728), every residential property, rented or owner-occupied, must pass a village inspection and hold an occupancy permit; homes already occupied are exempt until the tenant or owner changes. Call 618-234-0044 to schedule. The application needs a photo ID and a lease or sales contract, costs $30, and the inspection costs $100 for a house, duplex or condominium, $75 for a manufactured home and $50 per apartment. The village publishes a list of commonly failed inspection items.

Illinois building code in Swansea

Swansea’s adopted codes, as its fee chart and handouts list them, are the 2015 International Building, Residential, Mechanical and Fuel Gas Codes, the 2014 National Electrical Code with local amendments, the 2006 International Fire Code and the Illinois State Plumbing Code. FEMA’s Community Status Book lists the Village of Swansea (community 170637) as participating in the National Flood Insurance Program, with a current flood map dated November 5, 2003, and in the Community Rating System since May 1, 2019; its current entry, effective October 1, 2024, is class 10, with no flood insurance premium discount. The village’s floodplain page differs: it still describes CRS participation as giving homeowners in the regulatory floodplain a discount.

Want this handled start to finish?

Get a free quote →

Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline

Swansea building permit FAQs

How much is a building permit in Swansea?

11 cents per square foot, with a $50 minimum. Electrical, plumbing and mechanical permits add 10, 9 and 8 cents per square foot.

Can I get a plumbing or electrical permit by fax?

Yes. The village has permit-by-fax forms for plumbing, electrical and reroofing permits and a separate one for HVAC; the fax line is 618-234-0222.

What does it cost to connect a new house to village sewer?

$1,000 for a single-family tap, or $1,200 per unit in the Ravenel Subdivision, plus a $25 sewer inspection. Homes served by St. Clair or Caseyville Township sewer deal with the township.

Do I need an occupancy permit to buy or rent a home in Swansea?

Yes. Every residential property must pass a village inspection when the owner or tenant changes: $100 for a house, plus a $30 permit application.

How tall can a fence be?

Up to 36 inches in a front yard and no more than one-third opaque; up to 6 feet in side and rear yards, with side fences stopping at the front setback line.

Do solar panels need a permit?

Yes, every residential and commercial installation, with a structural engineer’s analysis, roof access pathways and an installer listed with the Illinois Commerce Commission.

Who handles fire sprinkler and alarm permits?

The Swansea Fire Department, on a $100 application that includes the final inspection; return inspections are billed extra.

Swansea permit records and official resources

The Building & Zoning Department answers records research requests about permits and properties. Formal requests go to the village’s FOIA officer at 1444 Boul Avenue, by mail, in person or by fax to 618-234-0222, on the village’s FOIA form; the first 50 black-and-white pages are free, then 15 cents a page, color 20 cents, and certification $1 a document.

Inspections are where schedules slip.

Get a free quote →

Simplify Swansea permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Swansea sooner?

Let Alliance prepare, file, and track your Swansea permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Swansea permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.