Skip to main content
Municipal GuideIllinoisUrbana · Champaign County

Urbana, Illinois Building Permit Guide

To get a building permit in Urbana, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

Urbana’s Building Safety Division at City Hall, 400 South Vine Street, reviews plans and issues building, electrical, plumbing and mechanical permits, most of them through the city’s CitizenServe portal.

Authority: Urbana Building Safety DivisionFees: Schedule effective July 1, 2026Phone: 217-384-2443
Authority
Building Safety Division400 S. Vine St., Urbana
New house
$382Up to 2,500 sq ft; no plan review fee
Fence permit
$30New or replacement fence
Inspectors
Mon–Fri 7:00–3:30217-384-2443

In the City of Urbana, the Building Safety Division of Community Development Services, at City Hall, 400 South Vine Street (217-384-2443), reviews plans, issues permits and inspects construction; Nick Hanson is the Building Official. Building, solar, electrical, mechanical, plumbing and accessory structure permits can be filed on the city’s CitizenServe portal and paid online once approved. Under the fee schedule effective July 1, 2026, a new single-family house up to 2,500 square feet costs $382, and one- and two-family homes pay no plan review fee.

What requires a building permit in Urbana?

Urbana’s permit list reaches down to small jobs. Its adopting ordinance deletes the model codes’ usual exemptions for small sheds, fences and low decks, so all three need a permit, and the Building Safety Division’s own list adds replacement windows, water heaters and fireplaces.

Permit needed

  • New houses, commercial buildings, additions and garages
  • Remodeling that adds, removes or moves walls, changes structure, or alters an attic, basement or garage
  • Every new or replacement fence, every deck and every yard shed
  • Replacement windows
  • Re-sheathing a roof or changing its pitch
  • Water heater, furnace, tub, shower or lavatory replacement
  • Fireplaces and wood stoves; rewiring or added wiring; air conditioning
  • Solar systems and demolition

No permit

  • Replacing shingles or adding an overlay, without re-sheathing or a pitch change
  • Adding up to three outlets with no new circuit from the panel
  • Minor electrical repairs listed in the city’s adopting ordinance

Placement rules come with the permits: decks may not go in required front or side yards, and sheds may not sit in a required front yard, closer than 18 inches to a side or rear lot line, or in an easement, and must be anchored against wind. Fence height, location and visual density are set by Chapter 7 of the City Code, so apply a few days before buying materials.

What Urbana decides and what the state holds

Urbana adopted the 2021 International Building, Existing Building, Residential, Mechanical, Fuel Gas, Fire and Property Maintenance Codes and the 2020 National Electrical Code, with local changes in its adopting ordinance. The Illinois Plumbing Code, the state energy code (the 2024 edition as Illinois adopted it), the state Life Safety Code and the 2018 Illinois Accessibility Code apply as state codes. The city sets its own fees, registers electrical contractors, and runs zoning, historic preservation, design review and a flood hazard ordinance that requires one foot of freeboard above the base flood elevation.

Short on time to read all of this?

Get a free quote →

Urbana building department: who handles permitting

The Building Safety Division reviews construction plans, issues permits and inspects work, and its housing inspectors enforce the property maintenance code, inspect rentals on complaint, and inspect University of Illinois certified housing and mobile home parks each year. The Planning Division, in the same department, handles zoning, design review, historic preservation, subdivisions and annexation. Appeals of building code decisions go to the Building Safety Code Board of Appeals.

Urbana permit contacts
OfficeHandlesContact
Building Safety DivisionBuilding, electrical, plumbing, mechanical, solar and accessory structure permits; inspectionsCity Hall, 400 South Vine Street, Urbana, IL 61801; 217-384-2443; buildingsafety@urbanail.gov
Building OfficialHead of the divisionNick Hanson, 217-384-2430
Inspector availabilityField and phone contactMonday–Friday 7:00 a.m.–3:30 p.m.; office hours 7–8 a.m., noon–12:30 p.m. and 3–3:30 p.m.
Planning DivisionZoning, variances, special uses, design review, historic preservation, subdivisions400 South Vine Street; 217-384-2440; Planning@urbanail.gov

The division’s permits cover work inside the Urbana city limits; recorded zoning approvals are filed with the Champaign County Recorder at the applicant’s cost.

Urbana permit types

The CitizenServe portal takes building, solar, electrical, mechanical, plumbing and accessory structure permits; you register once with an email address, get an email when the permit is reviewed and approved, and then pay by credit card or bank account. The city also posts PDF building, electrical, mechanical and miscellaneous permit applications.

Residential permits

  • New houses are priced by size: $382 up to 2,500 square feet, $475 up to 3,499 and $550 above; duplexes are $440, $525 and $660.
  • Garages may use a properly installed floating mat foundation, and a typical garage review takes several days once the plans are complete.
  • Decks are reviewed within several days of the application and plans.
  • Replacement windows in sleeping rooms must meet egress: a 5.7-square-foot clear opening (except at grade), at least 24 inches high and 20 inches wide.
  • Homeowner work: an owner who lives in a single-family house may get trade permits to do the work personally by showing knowledge of the requirements.

Commercial permits

New commercial buildings are priced from the building’s area, the ICC construction cost for its type, and the city’s 0.00200 multiplier, and they pay a plan review fee based on volume. Assembly, institutional, R-2 residential and covered mall projects over 5,000 square feet pay one and a half times that review fee, and the Building Official may add the actual cost of outside plan review. The paper building permit application (revised October 2010) asks for the use of the building, the type of improvement, the cost of construction with electrical, plumbing and HVAC costs listed separately, the floor area added, and, for anything other than a one- or two-family project, the tenant and the architect or engineer.

Not sure this scope needs a permit?

Get a free quote →

What comes before the building permit

  • Zoning. Variances, conditional uses and appeals go to the Zoning Board of Appeals; rezonings and special uses go through the Plan Commission. Planning staff strongly recommend a call or meeting before applying, and applicants pay the News-Gazette legal notice and Champaign County recording fees themselves.
  • Design and historic review. Projects that need design review go to the Design Review Board ($205) or get administrative review ($85), and a certificate of appropriateness for historic properties is free.
  • Boneyard Creek District. Construction and zoning use permits in the district use their own application, and a creekway permit costs $170.
  • Flood hazard areas. Development in a special flood hazard area needs a $185 plan review, and the lowest floor must reach the flood protection elevation, one foot above the base flood.

Urbana permit costs and fees

Urbana’s Schedule of Fees runs from July 1 to June 30; the current one took effect on July 1, 2026 and stays in force until changed. Building fees are non-refundable, and “estimated cost” includes all labor, materials and contractor profit.

Rather talk it over?

Call 1-855-478-4290 →
Urbana building and trade fees (schedule effective July 1, 2026)
WorkFee
New single-family house$382 up to 2,500 sq ft; $475 for 2,501–3,499; $550 for 3,500 and up
Additions$6 per $1,000 of estimated cost; $50 minimum
Alterations, renovations and repairs$6 per $1,000 (trade work excluded); $55 minimum; roof structure or sheathing $3 per $1,000
Garages and other utility buildings$6 per $1,000; $55 minimum
Decks / sheds$30 up to 100 sq ft, $55 minimum above / $25 up to 120 sq ft without foundation, $6 per $1,000 above
Fences / replacement windows (house or duplex)$30 / $40
Demolition$9 per $1,000; $170 minimum; accessory structure under 800 sq ft $55
Plan review, new non-residential construction$180 (up to 10,000 cu ft) to $610 plus $6 per 10,000 cu ft over 200,000
Plan review, additions and remodels over $15,0000.006 × project cost
Electrical$80 for a new single-family house; other work 1.25% of cost (1% above $200,000); $55 minimum
Plumbing$13 per fixture for one- and two-family; 1% of cost for commercial; $55 minimum
Mechanical1.30% of estimated cost; $65 minimum; fireplaces and wood stoves $55 each
Re-inspection$100 building; $105 electrical, plumbing or mechanical
Work started without a permitDouble the fee or $250, whichever is greater

Worked example from the schedule: a new 2,300-square-foot house pays $382 for the building permit and $80 for the electrical permit, or $462, with no plan review fee; plumbing ($13 per fixture, $55 minimum) and mechanical (1.30% of their cost) are added. The Building Safety page still quotes a $50 minimum for garages; the July 2026 schedule sets $55. Zoning fees include $205 for a minor variance or conditional use, $230 for a major variance, rezoning or special use, and $170 for a zoning verification letter. The Zoning Administrator charges $10 per $1,000 of estimated cost for a sign permit ($40 minimum), $35 for a temporary sign and $85 for a home occupation certificate.

Trade permits and who may pull them

Electrical, plumbing and mechanical work each have their own permit and fee, applied for on CitizenServe or the posted forms. The division asks owners to check that any contractor is licensed and holds the permit before work starts.

  • Electrical: Urbana registers electrical contractors. Initial registration is $180 ($135 if filed between January 1 and June 30), a renewal received after August 1 costs $345, and transferring a reciprocal license from another jurisdiction is $180. Rewiring must be done by a licensed electrician or by a homeowner permitted to wire his or her own home.
  • Plumbing: plumbers hold state licenses; the city adopted the Illinois State Plumbing Code, and sprinklers in one- and two-family homes are charged as plumbing.
  • Mechanical: furnaces, air conditioning and fireplaces need permits; the division suggests confirming in writing that the electrical service can carry a new air conditioner before signing a contract.
  • Roofing: anyone roofing for hire must hold a State of Illinois roofing license.
  • Other trades on the permit: a supplement to the building application lists the plumbing, electrical, HVAC, refrigeration, fireplace, sanitary and storm sewer, right-of-way and roofing contractors; the right-of-way contractor must be bonded.

Rather not deal with the building department?

Get a free quote →

How to apply for an Urbana building permit

1. Talk to Planning first

For zoning, design review or historic questions, call 217-384-2440 before you design.

2. Check the code and placement rules

Review the codes page and the setback rules for decks, sheds and fences.

3. Register on CitizenServe

Create an account with an email address; one registration covers future permits.

4. Submit plans and pay review

Upload the application and drawings; commercial and remodel projects pay the plan review fee when they apply.

5. Respond to comments

Answer any review comments; a plan reviewed more than three times costs $280 for each extra review.

6. Pay and print the permit

When the email says the permit is approved, pay online and keep the permit on site.

Review, corrections and what causes delay

Small residential permits such as decks and garages are typically reviewed within several days once complete plans are in. Additions vary widely, so the division recommends contacting it early. Plans that miss zoning setbacks, flood-zone elevations or design review approvals come back for correction, and each review after the third adds $280; an outside plan review, when the Building Official uses one, is billed at cost.

Inspections and certificates in Urbana

Inspectors work Monday to Friday from 7 a.m. to 3:30 p.m. and are in the office from 7 to 8 a.m., noon to 12:30 p.m. and 3 to 3:30 p.m.; call 217-384-2443 to arrange one. A failed inspection, a no-show or a denied entry costs $100 for building work and $105 for electrical, plumbing or mechanical work, and an after-hours inspection starts at $200 for building or $210 for the trades.

A certificate of occupancy normally comes with the permit; one applied for separately costs $85. A temporary certificate for 1 to 35 days of occupancy costs $160, and a second, for days 36 to 65, costs $290. Storing construction materials outside temporarily needs a $160 permit, and vacant buildings must be registered at $265 for the first six months.

Want this handled start to finish?

Get a free quote →

Illinois building code in Urbana

FEMA’s Community Status Book lists the City of Urbana (community 170035) as participating in the National Flood Insurance Program, with flood maps effective October 2, 2013. Article XI of the city’s adopting ordinance sets the flood protection elevation at the base flood plus one foot.

Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline

Urbana permit search and official resources

Permits issued by the Building Safety Division are updated weekly in the open data portal linked from the division’s page, which anyone can search. For permit files, plans or inspection reports, file a Freedom of Information request online, in person at the City Clerk’s Office, or by mail to 400 S. Vine Street; the city answers within five business days. Paper copies beyond 50 pages cost $0.15 a page, and the FOIA office can be reached at 217-384-6276.

Inspections are where schedules slip.

Get a free quote →

Urbana building permit FAQs

How much is a building permit for a new house in Urbana?

$382 up to 2,500 square feet, $475 up to 3,499 and $550 above, with no plan review fee; the electrical permit adds $80.

Do I need a permit for a fence or a shed?

Yes. Every new or replacement fence ($30) and every yard shed ($25 if 120 square feet or less without a foundation) needs a permit.

Does a new roof need a permit?

Only if you re-sheathe it or change its pitch; replacing shingles or adding an overlay does not, but the roofer needs a state license.

Can I do my own electrical or plumbing work?

Yes, if you own and live in the single-family house and can show you know the requirements; you still need the permit.

Do replacement windows need a permit?

Yes, $40 for a house or duplex, and bedroom windows must meet the egress size rules.

What does a failed inspection cost?

$100 for building work and $105 for electrical, plumbing or mechanical work.

How can I look up past permits?

Search the open data portal, updated weekly, or file a FOIA request with the City Clerk.

Simplify Urbana permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Urbana sooner?

Let Alliance prepare, file, and track your Urbana permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Urbana permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.