Inside the Village of Niles, building permits come from the Community Development Department at 1000 Civic Center Drive (847-588-8040, cd@vniles.com, Monday to Friday 8:00 a.m. to 4:30 p.m.), led by Community Development Director Christine Raguso. Applications go through the village’s Citizen Self-Service (CSS) portal, by email or at the counter. Under the building fee schedule dated July 22, 2020, permits cost $9 per $1,000 of construction value, with $55 minimums for small jobs, and roof, water heater, furnace and window permits can be issued while you wait.
What requires a building permit in Niles?
Niles uses one Permit Application with a checklist of work types, and posts an information guide for each common job. New construction, additions and interior remodeling use the building permit; decks, driveways, fences, garages, roofs, air conditioners and furnaces, new or replacement, are separate permits with their own conditions. The village warns that other work may also need a permit and asks owners to call before starting to avoid penalties.
Residential work on the application
- Additions, kitchens, bathrooms and interior remodels
- Decks, porches, stairs and stoops, sheds and detached garages
- Driveways, patios, flatwork, fences and grading
- Roofs, windows and doors
- Electrical work, generators and solar panels
- Plumbing, water heaters, lawn irrigation and backflow devices
- Furnaces and air conditioners
- Drain tile, flood control, overhead sewers and sewer repair
- Pools and spas, foundation repair and demolition
Commercial and site work
- New commercial buildings and tenant remodels
- Fire alarms, fire sprinklers and hood suppression
- Elevators
- Engineering, grading and parking lots
- Signs and temporary signs
- Health Division plan review
- Radon mitigation and floodplain work
Every job site dumpster must come from Groot; using another company can bring a stop work order or a fine. Express window replacements must keep the existing opening size and meet the 0.28 U-factor on the village sheet.
What Niles decides and what the state holds
The village adopts its own codes and keeps local amendments in Chapter 18 of its code (building, mechanical, plumbing and electrical) and Chapter 46 (fire prevention). Its list covers the 2024 International Residential, Building, Existing Building, Property Maintenance, Fuel Gas, Mechanical, Fire, Swimming Pool and Energy Conservation codes and the 2023 National Electrical Code, plus NFPA standards where they apply. Plumbing follows the current Illinois State Plumbing Code with Niles amendments, and accessibility follows the Illinois Accessibility Code; both are state codes. The village also runs its own health division, rental licensing and property maintenance program.
Short on time to read all of this?
Get a free quote →Niles building department: who handles permitting
The Community Development Department combines the Building Division, Business and Rental Licensing, the Fire Prevention Bureau, Property Maintenance, Planning and the Health Division, so one office handles plan review, inspections, fire system permits and health plan review. For complex projects the village sometimes sends plans to an outside reviewer, B&F Consultants, whose posted fee list applies. Utility work that sits only in the public right-of-way is permitted by Public Works Engineering instead; private projects that include utility work in the right-of-way stay with Community Development and need no separate right-of-way permit.
| Detail | Information |
|---|---|
| Office | Community Development, 1000 Civic Center Drive, Niles, IL 60714 |
| Phone and email | 847-588-8040; cd@vniles.com (permits and inspections) |
| Hours | Monday to Friday, 8:00 a.m. to 4:30 p.m. |
| Department head | Christine Raguso, Community Development Director |
| Zoning | Planning & Zoning, 847-588-8075 |
| Unincorporated land | Cook County Department of Building and Zoning; Skokie office, 5600 Old Orchard Road, 847-470-3730 |
Niles permit types
The CSS portal is the village’s main route: after creating an account, applicants submit documents and follow the status of their permits, plan reviews and inspections online. Paper applications are still accepted at the counter, and completed applications with their documents can be emailed. The top of each permit condition sheet lists the submission requirements and the fee, and the department calls when more information is needed or when the permit is ready, with the total fee.
Residential permits
- Express permits. A residential roof, water heater, sewer or plumbing repair, furnace replacement or window replacement can be issued while you wait, between 9:00 a.m. and 3:00 p.m. daily, if the application is complete: a state roofing license for roofs, a state plumbing license and a letter of intent on company letterhead for water heaters, a site plan for sewer repairs, and the equipment cut sheet and efficiency rating for furnaces.
- Decks. The deck sheet sets setbacks of 10 feet from the rear lot line (15 feet for decks over 24 inches high), 42-inch-deep post holes, 36-inch guards on decks 30 inches or more above grade, a handrail on four or more risers and an 80-square-foot cap on decks serving a second floor.
- Sewers and flooding. Overhead sewers, drain tile and flood control valves are permitted work, with a village sheet explaining overhead sewers.
- Owner-builders. A homeowner acting as general contractor and living in the home pays no fee for a residential temporary certificate of occupancy.
Building or remodeling a home here? Alliance handles home building permits, so the crew isn't waiting on the counter.
Not sure this scope needs a permit?
Get a free quote →Commercial permits
The permit procedures call for each drawing sheet to be sealed by a registered architect or engineer (or the index sheet of a bound set), with completed building, electrical and plumbing applications, and applicants should not include payment with the first submittal. Plan review is priced by floor area, and sprinkler, fire alarm and hood and duct reviews are separate charges. Projects subject to health review go through the Health Division’s plan review and its final occupancy checklist, and elevators carry their own permit, which includes plan review and two inspections.
For tenant improvements and new commercial builds, Alliance handles commercial permit filing through issuance. More on this: commercial building permits explained.
What comes before the building permit
- Zoning. Planning and Zoning administers the zoning ordinance, and the Planning and Zoning Board meets once a month. The zoning applications page gives the board the final say on variations, which modify a dimensional or numeric rule to relieve a hardship, although the board’s own page calls it a recommending body. For special uses (uses listed in Table 8-1 of the zoning ordinance as needing one), zoning map and text amendments it only recommends, and the Village Board decides. Subdivisions are handled as major or minor, and staff issue zoning verification letters.
- Stormwater. Niles is one of the municipalities MWRD has authorized to issue Watershed Management Ordinance permits, so those applications go to the village; it forwards certain projects, including those in combined sewer areas, to MWRD.
- Floodplain and demolition. Floodplain work has its own village application, and the village links the Cook County demolition permit for tear-downs.
Niles permit costs and fees
Fees come from the Building Fee Schedule of the Community Development Department dated July 22, 2020 (code sections 18-1 to 18-6), the schedule linked from the Building Division page.
| Work | Fee |
|---|---|
| Building permit (construction, remodeling, repair) | $9 per $1,000 of valuation |
| Fence, shed, window, driveway, deck or pool | $9 per $1,000; $55 minimum, plus electrical fees |
| Roofing | $55 minimum residential; $75 commercial |
| Residential plan review | $200 new; $150 addition; $50 remodel (two reviews included); $100 each extra review |
| Commercial plan review | $175 under 3,000 sq ft; $275 to 10,000; $410 above; $75 minimum |
| Electrical | $55 minimum; service $55 single-family, $60 commercial or multi-family up to 800 amps, $240 above; $5 per circuit |
| Plumbing | $55 minimum plus $7 per fixture; underground sewer $0.50 per foot |
| Mechanical | $55 minimum; $7 per residential appliance; $25 per commercial appliance |
| Fire sprinkler; fire alarm | $55 plus $1 per head; $55 plus $1 per device |
| Demolition | $10 per $1,000; $2,500 minimum complete, $750 partial, $55 accessory |
| Occupancy inspection | $35 per residential unit; $35 or $75 commercial by size |
| Re-inspection; permit extension | $60; 20% of the permit fee |
| Technology fee | 3% |
Rather talk it over?
Call 1-855-478-4290 →Worked example from the schedule: a $40,000 kitchen remodel has a building permit fee of 40 × $9, or $360, and a residential remodeling plan review of $50, before trade permit fees and the 3% technology fee. Street and parkway openings cost $40 with excavation deposits of $1,500 and $400, a required parkway tree is $270 per planting, and construction water is $50 for a house.
Trade permits and who may pull them
All contractors working in Niles must register with the village. Registration is usually handled with the permit application, or in advance through CSS, and it expires every April 30. Bonds and insurance are no longer required (since August 1, 2018).
- General contractors, roofers, elevator and sprinkler contractors and other subcontractors: $40, with a copy of the state roofing, elevator or fire sprinkler license where one applies.
- Electrical contractors: $40 and an electrical license from one of the communities Niles accepts: Buffalo Grove, Chicago, Downers Grove, Elgin, Libertyville, Orland Park, Ottawa, Schaumburg, Waukegan, Woodstock or Zion.
- Plumbing contractors: no fee, with a copy of the state plumbing license (055) (Illinois plumbers are licensed by the Department of Public Health); water heater and repair permits also need a letter of intent.
- Fire alarm and irrigation contractors: no fee, with the state private alarm (127) or irrigation (060) license.
The Permit Application marks electricians, plumbers, fire protection, water and alarm contractors as needing a license, and electrical, plumbing and mechanical work follows the village’s Chapter 18 amendments.
Rather not deal with the building department?
Get a free quote →How to apply for a Niles building permit
Register on the village’s Citizen Self-Service portal, which also tracks reviews and inspections.
Open the information guide for your job to see the documents, fee and required inspections.
Call Planning & Zoning if the work may need a variation or special use.
Upload the application, plans and contractor information, or email them to cd@vniles.com; do not pay yet.
Staff call or post comments if anything is missing; resubmit revised plans.
When staff report the total fee, pay it and collect the permit.
Review, corrections and what causes delay
Residential plan review fees cover a first and second review; each later review costs $100, so complete drawings save money as well as time. Express permits are possible only when every listed item is in hand. Contractor registration is checked when the application comes in, a dumpster from another hauler can bring a stop work order, and complex plans may go to the outside consultant.
Inspections and certificates in Niles
Book building inspections by calling Community Development at 847-588-8040 or emailing cd@vniles.com, and follow the inspection list on your permit’s condition sheet; a deck, for example, needs post hole, framing and final inspections. Call J.U.L.I.E. at least 48 hours before digging. A re-inspection costs $60.
A certificate of occupancy follows the final inspections, at $35 per inspection for each residential unit or small commercial space and $75 for commercial space over 10,000 square feet. Temporary certificates cost $50 for homes and $150 for other buildings. Projects under health review also complete the Health Division’s final occupancy checklist. Rental properties are licensed through the department’s Business and Rental Licensing division. The rental license and crime-free housing programs require an inspection before each new tenant and then once every three years; landlords request a date online, choosing morning or afternoon, and staff call back to confirm. Short-term rentals of less than 30 days, such as Airbnb and VRBO, are not permitted in residential zoning districts.
Illinois building code in Niles
Niles enforces the 2024 International codes and the 2023 National Electrical Code with its Chapter 18 and Chapter 46 amendments through the Community Development Department. FEMA’s Community Status Book lists the Village of Niles (community 170130) as participating in the National Flood Insurance Program, with flood maps effective August 19, 2008, and in the Community Rating System since October 1, 2013, at class 5 since October 1, 2019, a 25% flood insurance discount in mapped flood zones.
Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline
Want this handled start to finish?
Get a free quote →Niles building permit FAQs
How much is a building permit in Niles?
$9 per $1,000 of construction value, with $55 minimums for fences, sheds, decks, windows, driveways and pools, plus plan review.
Can I get a permit the same day?
Yes, for residential roofs, water heaters, sewer or plumbing repairs, furnace replacements and window replacements, between 9:00 a.m. and 3:00 p.m., with a complete application.
Can I apply online?
Yes. The Citizen Self-Service portal takes applications and shows the status of reviews and inspections; paper and emailed applications are still accepted.
What does contractor registration cost?
$40 a year for most contractors, renewed each April 30; plumbers, fire alarm and irrigation contractors register with their state license and pay nothing.
Can I use any dumpster company?
No. Job site dumpsters must come from Groot, or the job can be stopped or fined.
Do I need an MWRD permit for site work in Niles?
Watershed Management Ordinance permits are filed with the village, which MWRD has authorized to issue them; some projects are forwarded to MWRD.
Who decides a zoning variation in Niles?
The Planning and Zoning Board has final authority on variations; on special uses and map or text amendments it recommends and the Village Board decides.
How do I schedule an inspection?
Call 847-588-8040 or email cd@vniles.com, following the inspection list on the permit’s condition sheet.
Niles permit search and official resources
Applicants can check their own permits, plan reviews and inspections in the CSS portal. For older permit files, plans or inspection records, file a Freedom of Information Act request using the FOIA request form on the village’s Transparent Government page; zoning research on a property is available through a zoning verification letter.
Inspections are where schedules slip.
Get a free quote →- Niles Community Development
- Building Division and CSS account help
- Permit applications and information guides
- Village of Niles permit application
- Permit procedures and adopted codes
- Codes and amendments
- Express permits
- Building fee schedule (July 22, 2020)
- Contractor registration
- Plan review consultant fees
- Deck permit information
- Planning and zoning
- Zoning applications
- Rental inspections
- Transparent Government: FOIA request form
- MWRD authorized municipalities
- Cook County demolition permitting
- Cook County Department of Building and Zoning
- FEMA Community Status Book, Illinois
Simplify Niles permitting with Alliance Permitting
Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Niles sooner?
Let Alliance prepare, file, and track your Niles permits while your crew stays on the job.
More Illinois permitting guides
Cook County
Read guide →Northbrook
Read guide →Northlake
Read guide →Normal Building Permit Guide
Read guide →North Aurora Building Permit Guide
Read guide →Oak Forest Building Permit Guide
Read guide →This guide is provided by Alliance Permitting for general information about Niles permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.