In Oak Forest, the city’s Building Department at City Hall, 15440 S. Central Avenue (708-444-4817, permits@oak-forest.org; Monday to Friday, 9:00 a.m. to 5:00 p.m.), led by Building Commissioner Mike Forbes, reviews plans, issues permits and inspects. It prefers applications by email. New houses pay 1.25% of the higher of the RSMeans figure or the stated value, commercial buildings 1.5% of the first $500,000, and most small home projects pay a fixed amount, such as $135 for a deck or a new roof.
What requires a building permit in Oak Forest?
Property owners and contractors must get a city permit before any improvement project, and the city warns that its list is not complete, so the department answers questions about anything not shown. Each common project has a building guide setting out the submittal, the zoning limits and the inspections.
Home improvement projects
- Pools, spas and hot tubs
- Decks, porches and gazebos
- Sidewalks, driveways and patios
- Garages, sheds and fences
- Fireplaces and lawn irrigation
- Roofing, windows and sliding glass doors
- Interior remodels and foundation repair
- Sump pumps, drain tile, grading and drainage
Trade and other work
- Electric service and electrical repairs
- Plumbing renovation or repair
- Sewer and water line repairs
- Furnace and air conditioner installation
- Fire alarms and sprinklers
- Signs
- Demolition
What Oak Forest decides and what the state holds
The city adopts its own codes: the 2018 International Building, Residential, Mechanical, Fuel Gas and Fire codes, the 2021 International Energy Conservation Code, the 2018 Chicago Electrical Code and, for property upkeep, the 2018 International Property Maintenance Code. Plumbing follows the Illinois Plumbing Code, the current state edition with Oak Forest amendments, and accessibility follows the state’s Illinois Accessibility Code. Fees, retainers, impact charges, contractor registration and construction hours are city rules.
Oak Forest building department: who handles permitting
The Building Department reviews construction plans, issues building permits, inspects completed work and enforces ordinances. Zoning and use questions belong to the Community Development Department, and fire sprinkler and fire alarm plans go to FSCI (847-697-1300) for review. Land outside the city limits in unincorporated Cook County is handled by the Cook County Department of Building and Zoning.
| Detail | Information |
|---|---|
| Office | Building Department, City Hall, 15440 S. Central Avenue, Oak Forest, IL 60452 |
| Permits, registration, inspections | 708-444-4817; permits@oak-forest.org |
| Hours | Monday to Friday, 9:00 a.m. to 5:00 p.m. |
| Department head | Mike Forbes, Building Commissioner, 708-444-4822 |
| City Hall main line | 708-687-4050 |
| Unincorporated land | Cook County Department of Building and Zoning, 69 W. Washington St., Chicago, 312-603-0500 |
Short on time to read all of this?
Get a free quote →Oak Forest permit types
A home improvement permit needs the permit application, drawings of the project, the signed contract or proposal with a detailed scope, a plat of survey showing existing and proposed structures with distances to the lot lines, registration of every contractor and, where the fee table calls for one, a retainer. The Building Permit Express Application also asks for the dumpster company. The city asks for permit applications, contractor registrations and apartment or condo registrations by email, and staff follow up as needed.
Residential permits
- New houses. The submittal is the application, a soils report, two plats of survey with grades by an Illinois-licensed engineer or surveyor, three sets of construction plans and three sets of fire sprinkler plans by an Illinois registered design professional, the contractor list and a $2,500 retainer.
- Fences. Fences may stand in interior side and rear yards up to 6 feet high in residential areas, with the finished side facing the neighbors and every post inside the property line in a 42-inch hole. Corner lots need Community Development’s answer first, and subdivision covenants may add limits. The fence guide prices the permit at $235, of which $100 is a retainer refunded when the final inspection passes; the city’s fee table lists a fence as $15 plus $120 in inspections, $135 in all, so ask which applies.
- Solar panels. A solar permit uses the express application with a roof plan locating the modules, inverters, combiner boxes and disconnects, an Illinois-licensed engineer’s structural analysis of the roof, equipment cut sheets and the signed contract, including lease or payment terms. The city’s solar page expects four strings or fewer, inverter output of 13.44 kW or less on the load side of the service disconnect, and two 36-inch fire access pathways on a house roof. Residential solar fees are $135 for a new electric service panel, 1% of construction value for the final building and electrical inspection, a $60 minimum for plan review, $60 per failed inspection and $60 a month to extend an expired permit.
- Major remodels. A major residential repair, remodel or rehab without enlargement pays 80% of the new building fee, at least $100, and always needs a retainer.
Building or remodeling a home here? Alliance handles home building permits, so the crew isn't waiting on the counter.
Commercial permits
New commercial buildings need the application, a soils report, two graded plats of survey, three sets of construction plans and three of fire sprinkler plans, fire alarm plans and the contractor list, with a retainer of $5,000 to $10,000 by valuation. A tenant build-out needs three sets of plans and a $1,000 to $2,500 retainer, and fire system submittals depend on the existing space. A new owner or tenant moving into an existing space files a Business License Application: Community Development reviews the use and zoning, the Building and Fire Departments inspect, and the certificate of occupancy and business license issue after approval.
Not sure this scope needs a permit?
Get a free quote →For tenant improvements and new commercial builds, Alliance handles commercial permit filing through issuance. More on this: commercial building permits explained.
What comes before the building permit
- Development review. The city’s zoning page says all projects get development review by the Community Development Department and that the Development Application is completed before the building permit. To learn whether zoning approval is needed, send staff the address, a current plat of survey with a sketch of the work and a description of the use; a concept meeting may follow.
- Planning and Zoning Commission. Site plans, special uses, variations, text amendments, rezonings, planned developments and subdivisions go to this nine-member commission, which holds the public hearings and forwards its findings to the City Council for final approval. It meets on the first and third Wednesdays at 7:00 p.m. in City Council Chambers.
- Stormwater. Oak Forest is not on MWRD’s list of authorized municipalities, so a Watershed Management Ordinance permit, where one is needed, comes from MWRD.
Oak Forest permit costs and fees
The Construction Fees page sets the charges. For new buildings the base is the median square-foot price in the current RSMeans cost data book or the value written on the permit, whichever is higher, and the percentage fee includes the normal building inspections. Engineering reviews, plan reviews, special inspections and outside inspections are billed at cost plus 10%.
| Work | Fee |
|---|---|
| New residential building | 1.25% of value; minimum $100 |
| Residential addition or accessory structure | 2% of value |
| New non-residential building or addition | 1.5% of the first $500,000; 1.25% from $500,000 to $1,000,000; 1% above; minimum $100 |
| Minor home permits (fence, deck, roof, concrete, electrical, plumbing, shed) | $15 permit + $120 inspections = $135 |
| Furnace or air conditioner; sewer repair; bay or bow window | $15 + $60 = $75 |
| Replacement windows | $35 |
| Hot tub, spa or above-ground pool | $15 + $120 + $150 retainer = $285 |
| Demolition | $65 residential; $105 non-residential |
| Inspections | $60 each; $60 re-inspection, then $120 for each later one |
| General impact fee | $2,000 per new unit requiring occupancy |
| Park fee; fire protection fee | $100 per unit each |
| Permanent sign; temporary sign | $9 per lineal foot, minimum $105; $50 per sign per event |
| Permit renewal | $50 |
Rather talk it over?
Call 1-855-478-4290 →Retainers cover engineering and plan review charges, missed or failed inspections and any damage to city property, and the unused balance is returned within 30 days after final occupancy: $2,500 for a new house, $1,000 for a residential addition or alteration, $500 for a garage or three-season room, and $1,000 to $10,000 for commercial work by value. Water meters from Public Works cost $260 (3/4 inch) to $2,355 (2-inch compound). Worked example: if the stated value of a new commercial building, $800,000, is higher than the RSMeans figure, the permit fee is 1.5% of $500,000 ($7,500) plus 1.25% of $300,000 ($3,750), or $11,250. Starting work without a permit doubles the inspection and plan review fees on the first $750 of the basic fee and adds 25% of the basic fee above $750.
Trade permits and who may pull them
Every contractor working in the city registers first, and no building permit issues until every contractor on the project is registered. Registration lasts one year from issue and is accepted at any time: $350 a year for a general contractor and $100 a year per trade for a subcontractor. Each registrant files the application, a signed original $10,000 license and permit bond, a certificate of insurance ($500,000 property and $1,000,000 injury, or $1,000,000 combined single limit) naming the city as holder, and workers’ compensation coverage or a sole proprietor affidavit.
- Electrical contractors: a copy of an electrical license from a recognized testing municipality and a letter of intent.
- Plumbing contractors: a copy of the IDPH plumbing contractor registration (055) and a letter of intent; with the 055 license no bond or registration fee is charged.
- Irrigation contractors: IDPH irrigation registration (060); no bond.
- Roofers: an IDFPR roofing contractor license.
- Fire alarm, sprinkler and elevator contractors: an IDFPR alarm registration or electrical license, or State Fire Marshal sprinkler or elevator registration.
How to apply for an Oak Forest building permit
Send Community Development the address, plat of survey and project sketch if use or zoning is in question.
Open the building guide for your project for the submittal, zoning limits and inspections.
File each contractor’s registration with the bond, insurance and any state license.
Send the application, drawings, contract and plat of survey to permits@oak-forest.org.
Pay the permit, inspection and retainer amounts when the permit is approved.
Request each inspection on the list given at issue 48 to 72 hours ahead.
Rather not deal with the building department?
Get a free quote →Review, corrections and what causes delay
An approved permit that is not picked up and paid for is cancelled automatically after 60 days. Applications stall when a contractor is unregistered, the plat of survey does not show distances to the lot lines, or a new house or commercial building is missing its soils report or sprinkler plans. Projects that need site plan, special use or variation approval wait for the Planning and Zoning Commission and the City Council.
Inspections and certificates in Oak Forest
The permit comes with a list of required inspections, and the permit holder, usually the owner or contractor, arranges them by calling 708-444-4817 or emailing the department at least 48 to 72 hours ahead; the permit form prints 708-444-4818 for inspections. Plumbing, electrical and HVAC inspections are usually late in the afternoon, the approved plans must be on site, and no inspections are done on weekends. A failed inspection, or one not cancelled at least two hours ahead, costs $60, and each later re-inspection $120. Elevator inspections are billed at cost plus $10.
Construction is allowed from 7:00 a.m. until 10:00 p.m. Under Section 131.07 of the City Code, noisy building operations with equipment such as pneumatic hammers or tractors are barred between 10:00 p.m. and 7:00 a.m. where most buildings within 300 feet are homes, and between 10:00 p.m. and 6:00 a.m. elsewhere, except in emergencies. New occupants of commercial space receive a certificate of occupancy after the Building and Fire Department inspections.
Apartment and condominium buildings are registered with the city every year and inspected each year between May 1 and September 30, covering the structure, the dwelling units and the common areas; the city inspects more than 1,800 units a year. Registration forms for apartments and condominiums are on the Multi-Dwelling Properties page.
Illinois building code in Oak Forest
Oak Forest enforces the 2018 International codes, the 2021 energy code and the 2018 Chicago Electrical Code through its Building Department. FEMA’s Community Status Book lists the City of Oak Forest (community 170136) as participating in the National Flood Insurance Program, with flood maps effective November 1, 2019.
Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline
Want this handled start to finish?
Get a free quote →Oak Forest building permit FAQs
How much is a building permit in Oak Forest?
New houses pay 1.25% of value (at least $100); additions pay 2%; most small home jobs pay $135, including inspections.
How much is a permit for replacement windows?
$35, with no inspection fee; bay or bow windows are $75.
Can I email my application?
Yes. The city encourages emailed applications, contractor registrations and inspection requests to permits@oak-forest.org.
What does contractor registration cost?
$350 a year for a general contractor and $100 per trade for subcontractors, with a $10,000 bond; plumbers with an IDPH 055 license pay no fee.
How far ahead do I book an inspection?
48 to 72 hours, by phone at 708-444-4817 or email; there are no weekend inspections.
What is a retainer?
A deposit, such as $2,500 for a new house, that covers review charges, failed inspections or damage; the unused balance is returned after final occupancy.
How tall can a fence be?
Up to 6 feet in residential side and rear yards; corner lots need Community Development’s review.
What are the construction hours?
7:00 a.m. to 10:00 p.m.
Oak Forest permit search and official resources
For a permit’s status, contact the Building Department at 708-444-4817. Past permits and plans are public records: one FOIA request to the city’s FOIA officer, by mail, in person, by email or by fax to 708-687-8817, reaches every department, and the city answers within five business days. Since January 1, 2026 an emailed request must be written in the body of the email, because the city need not open attachments or links.
Inspections are where schedules slip.
Get a free quote →- Oak Forest Building Department
- Building permits
- Improvement project permits
- New residential construction
- Commercial construction and re-occupancy
- Construction fees
- Fence guide
- Solar system permit requirements
- Multi-dwelling registration and inspection
- Permit form center
- Building permit express application
- Adopted building codes
- Contractor registration
- Building inspections
- Construction hours
- Planning and zoning
- Planning and Zoning Commission
- Zoning applications
- Freedom of Information Act requests
- MWRD authorized municipalities
- Cook County Department of Building and Zoning
- FEMA Community Status Book, Illinois
Simplify Oak Forest permitting with Alliance Permitting
Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Oak Forest sooner?
Let Alliance prepare, file, and track your Oak Forest permits while your crew stays on the job.
More Illinois permitting guides
Cook County
Read guide →Palos Heights
Read guide →Park Forest
Read guide →Oak Lawn Building Permit Guide
Read guide →Oak Park Building Permit Guide
Read guide →Ogle County Building Permit Guide
Read guide →This guide is provided by Alliance Permitting for general information about Oak Forest permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.