Inside Elmhurst, building permits come from the Community Development Department at City Hall, 209 N. York Street (630-530-3030; weekdays 8:30 a.m. to 5:00 p.m.); Chris Kransberger is the Building Commissioner. Anyone seeking a permit, homeowner or contractor, must apply through the city’s Citizen Self-Service Portal, which also takes payments and inspection requests. Most house projects have a flat fee: the residential schedule in force from May 1, 2026 to April 30, 2027 charges $88 for a fence, $177 for a deck and $10,592 for a new home.
What requires a building permit in Elmhurst?
The city’s Required Permit List names the work that must be applied for in the portal. If a project is not on it, call City Hall at 630-530-3030 and staff will say whether a permit is needed and which type.
Homes and yards
- Additions, dormers, garages, garage slabs, porches and pavilions
- Interior remodels and footing or foundation repair
- Air conditioners or furnaces placed in a new location
- Decks, patios, pergolas, sheds of 100 sq ft or more and retaining or seat walls
- Fences and gates, driveways, sidewalks, steps and stoops
- Pools, spas and hot tubs; sport courts; fire pits and outdoor kitchens
- Windows and siding
- Grading, drain tile, sump pumps, downspouts, drywells and artificial turf
- Lawn sprinklers, overhead sewers, check valves and sewer or water line work
- Electrical service, generators, solar panels, EV chargers and radon systems
Commercial and other
- New business occupancy
- Commercial HVAC, re-roofing, signs and site work
- Commercial interior demolition and parking lots
- Fire alarms, fire sprinklers, hood and duct systems
- Removing underground tanks
- Elevators and cell towers
- Demolitions and dumpsters
- Beekeeping and membrane or hoop houses
- Transfer stamps when a property is sold
Roofs and mechanical units are the two common surprises. The city’s re-roofing sheet says minor roof repair and roof replacement on a house need no permit from Community Development, though a roof may carry only two layers, a roof that already has two must be stripped before new covering goes on, and new sheathing on a house must be at least 5/8 inch (particle board and OSB are not allowed); commercial re-roofs do need a permit. Air conditioners and furnaces need a permit when the unit goes in a new location.
What Elmhurst decides and what the state holds
Elmhurst has adopted the 2021 editions of the International Code Council series as its model codes, with local amendments in its Municipal Code. The city sets its own permit list, fees, contractor registration and construction rules, while plumbing work done by an owner follows the state plumbing license law, which lets only an owner-occupant or lessee-occupant install plumbing without a license.
Elmhurst building department: who handles permitting
The Community Development Department reviews permit applications, inspects construction, carries out fire safety and occupancy inspections and reviews and issues stormwater permits. Its Planning and Zoning Division handles site plan review, subdivisions and zoning administration. Within the city every permit is the city’s; the few unincorporated pockets nearby go to DuPage County Building and Zoning (630-407-6700), or on the Cook County side to Cook County’s Department of Building and Zoning (312-603-0500), and each county permits unincorporated land only.
Short on time to read all of this?
Get a free quote →| Detail | Information |
|---|---|
| Office | Community Development Department, City Hall, 209 N. York St., Elmhurst, IL 60126 |
| Community Development | 630-530-3030 |
| Building Department line | 630-530-3025 |
| Planning and Zoning | 630-530-6019 |
| Hours | Weekdays 8:30 a.m. to 5:00 p.m.; after hours 630-530-3050 |
| Building Commissioner | Chris Kransberger |
| Plan review questions | planreview@elmhurst.org (put the address and permit type in the subject) |
Elmhurst permit types
The portal’s application assistant lists every permit and license type. Once an account is created, the applicant picks the permit, adds the address and permit details, adds contacts such as contractors and the architect, answers the questions for that permit type, uploads plans and the plat of survey, and signs. The portal then shows the project workflow, required items and inspections, and emails everyone attached to the permit as it moves forward.
Residential permits
- Plans. Every sheet of a permit drawing set needs the architect’s seal, signature and license expiration date, and engineers sign their own sheets; sheds and other minor accessory structures are exempt from the seal.
- Owner-builders. A homeowner doing the work files the Homeowner Affidavit, acting as their own general contractor, showing an Illinois driver’s license or ID and naming any part of the work that others will do; a false statement can cost the permit.
- Garages. The detached garage handout bars grade-beam foundations for garages of 600 sq ft or more.
- Spot surveys. New houses, townhouses, additions and garages need a spot survey with the top-of-foundation elevation, sealed by a professional engineer or registered land surveyor and uploaded to the portal; the city’s notices say construction may not move past the foundation (no backfill under the 2005 notice, no framing under the 2007 letter) until it is approved.
- Demolition. Neighbors beside, across the street and across the alley must get a notice by hand, door hanger or first-class mail giving the week of demolition, the site contacts and the city’s Resident’s Guide to Neighborhood Construction; a sign goes up at least seven days before, and an affidavit is filed before the permit issues.
- Handouts. The city also posts sheets on decks, guardrails and handrails, lawn sprinklers, outdoor fire pits, solar panels, excavation, elevators, sidewalks and approaches, water meters and tree protection.
Building or remodeling a home here? Alliance handles residential permit filing, so the crew isn't waiting on the counter.
Not sure this scope needs a permit?
Get a free quote →Commercial permits
Commercial jobs use the same portal. Fire alarm and fire sprinkler permits require a third-party plan review, and the approved third-party plans must be uploaded to the application; the fire department publishes a sprinkler plan worksheet. A business opening in Elmhurst also needs a new business occupancy inspection and a certificate of occupancy application.
For tenant improvements and new commercial builds, Alliance handles commercial permit expediting through issuance. More on this: commercial building permits explained.
What comes before the building permit
- Zoning. The nine-member Zoning and Planning Commission, which also sits as the Zoning Board of Appeals, meets on the first and third Tuesdays at 7:00 p.m. at City Hall; variations, special uses and other zoning cases go there first.
- Other commissions. Elmhurst also has a Historic Preservation Commission and an Architectural and Building Commission.
- Stormwater. Community Development reviews and issues stormwater permits; the fee sheet lists a stormwater fee in lieu of $125 for 0 to 50 sq ft and $250 for 51 to 100 sq ft.
- Utilities and right of way. New homes pay meter, water tap and sewer tap fees, and work in the parkway, street patches and soil borings in the right of way are separate permit lines.
Elmhurst permit costs and fees
Community Development publishes a Residential Permit Fees sheet effective May 1, 2026 to April 30, 2027. Its second page still heads the fee column “2025-2026,” so confirm those rows (porch to window replacement) when you apply. The posted commercial schedule is older, covering May 1, 2024 to April 30, 2025.
| Permit | Fee |
|---|---|
| New home; townhome (per unit) | $10,592; $6,936 |
| Home addition, per floor, per addition | $1,428 under 500 sq ft; $2,684 over 500 sq ft |
| Interior remodel; dormer | $448; $577 |
| Garage or pavilion; garage slab only | $538; $131 |
| Deck, pergola, generator, EV charger or solar | $177 each |
| Fence | $88 |
| Air conditioning, furnace or HVAC work | $122 |
| Electrical permit | $131 |
| Driveway or approach; patio or artificial turf | $122 each |
| Above-ground pool, spa or hot tub; in-ground | $153; $435 |
| Shed over 100 sq ft; porch; siding | $173 each |
| Window replacement, 1 to 5; 6 or more | $92; $177 |
| Demolition; demolition sign | $2,496; $51 |
| Dumpster | $82 |
| New sanitary or storm sewer tap | $703 each |
Rather talk it over?
Call 1-855-478-4290 →Worked example from the residential sheet: replacing eight windows ($177) and building a deck ($177) costs $354 in permit fees. Commercial work is usually charged the greater of a minimum fee, 1% of construction cost or, for building work, $1.00 per square foot, and refundable deposits may be added.
| Permit | Fee |
|---|---|
| Minor remodel or tenant finish, 2,000 sq ft or less | Greater of $819, 1% of cost or $1.00 per sq ft |
| Major remodel or tenant finish, over 2,000 sq ft | Greater of $1,574, 1% of cost or $1.00 per sq ft |
| New commercial, industrial or institutional building | Greater of $15,744 per floor, 1% of cost or $1.00 per sq ft |
| Commercial re-roof; electrical permit | Greater of $329 or 1% of cost, each |
| HVAC work | Greater of $311 or 1% of cost |
| Demolition | $2,359 plus a $1,000 deposit |
| New business occupancy inspection | $316 |
Trade permits and who may pull them
Electrical, plumbing and mechanical work are separate permit types in the portal, and the electrical permit is $131 for a house. Contractors register in the same portal: an applicant can start a permit without them, but every contractor the job requires must complete the city’s registration requirements before the permit can be approved for payment. Roofers need a State of Illinois roofing license, and the city’s re-roofing sheet tells owners to ask for it along with proof of liability and workers’ compensation insurance.
A homeowner may take out permits and do the work on their own home by signing the Homeowner Affidavit; anyone else working on the job must be listed on it. For plumbing, the affidavit repeats the state rule that only an owner-occupant or lessee-occupant living in the home as a sole and exclusive residence (or about to, for at least six months) may install plumbing without a license. Fire alarm and sprinkler contractors must upload an approved third-party review.
Rather not deal with the building department?
Get a free quote →How to apply for an Elmhurst building permit
Check the Required Permit List or call 630-530-3030 for anything not listed.
Variations and special uses go to the Zoning and Planning Commission before any permit.
Register in the Citizen Self-Service Portal; Google Chrome works best.
Add the address, details and contacts, then upload sealed plans, the plat of survey and other documents.
Every contractor on the job finishes registration before the permit can be paid for.
Pay in the portal once approved, then follow the listed inspections.
Review, corrections and what causes delay
The portal shows whether plans were accepted or denied and what items are still required, and resubmittals go through the same account. Unsealed drawings, a missing plat of survey, unregistered contractors and missing third-party fire reviews hold permits back. Questions about the review itself go to planreview@elmhurst.org with the address and permit type in the subject line.
Inspections and certificates in Elmhurst
Inspections are requested only by logging into the portal and opening the permit, where the required inspections and inspectors’ notes are listed. Availability is limited in the week before, the week of and the week after a city holiday, and no inspections are scheduled on in-service days when City Hall is closed. The recognized holidays are New Year’s Day, Memorial Day, the Fourth of July, Labor Day, Thanksgiving and the day after, Christmas Eve and Christmas Day, and Martin Luther King Jr. Day, Presidents Day and Veterans Day are possible in-service days. The spot survey for a new foundation must be approved in the portal before the builder moves on.
Elmhurst also enforces a construction code of conduct: work hours are 7:00 a.m. to 6:00 p.m. Monday through Saturday and 10:00 a.m. to 6:00 p.m. on Sundays and holidays, sites need a portable toilet, a dumpster and erosion controls, streets must be kept free of mud, and workers may not park on parkways. Violations can bring a stop-work order, a ticket or a revoked permit. Businesses need a certificate of occupancy, and the new business occupancy inspection is one of the listed permit types.
Illinois building code in Elmhurst
The 2021 International codes, as amended in the Elmhurst Municipal Code, apply to work in the city. FEMA’s Community Status Book lists the City of Elmhurst (community 170205, in Cook and DuPage counties) as participating in the National Flood Insurance Program, with flood maps effective August 1, 2019.
Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline
Want this handled start to finish?
Get a free quote →Elmhurst building permit FAQs
Do I need a permit to replace the roof on my house in Elmhurst?
No. The city says roof repair and roof replacement on a house need no permit from Community Development, but commercial re-roofs do, and a dumpster has its own permit.
Can I apply on paper?
The city requires everyone seeking a permit to use the Citizen Self-Service Portal.
How much is a fence permit?
$88 under the residential fees in force from May 1, 2026.
Do I need a permit for a shed?
Yes, for a shed of 100 sq ft or more; the fee is $173.
Can a homeowner pull their own permit?
Yes, by signing the Homeowner Affidavit and acting as their own general contractor; plumbing follows the owner-occupant rule.
How do I schedule an inspection?
Request it in the portal under the permit; holiday weeks have limited slots.
What does a new house permit cost?
$10,592, plus meter, tap and other fees that apply.
Elmhurst permit search and official resources
Permit status, plan decisions and inspection results for any permit tied to your account can be followed on the portal dashboard. For other records, the Deputy City Clerk is the city’s Freedom of Information Act officer (630-530-3015): requests go through the city’s online FOIA portal or in writing at the Administration Office in City Hall, and the city responds within five business days (21 for commercial requests). The first 50 black-and-white pages are free, then 15 cents a page, and certification is $1.
Inspections are where schedules slip.
Get a free quote →- Elmhurst Citizen Self-Service Portal
- Citizen Self-Service Portal instructions
- Permits and forms
- Required permit list
- Residential permit fees, May 2026 to April 2027
- Commercial permit fees, May 2024 to April 2025
- Adopted building codes
- Residential permit plan review procedure
- Homeowner affidavit
- Re-roofing information
- Demolition notice requirements
- Detached garage handout and spot survey notice
- Building Department and construction code of conduct
- Zoning and Planning Commission
- Request for public records (FOIA)
- DuPage County Building and Zoning (unincorporated areas)
- FEMA Community Status Book, Illinois
Simplify Elmhurst permitting with Alliance Permitting
Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Elmhurst sooner?
Let Alliance prepare, file, and track your Elmhurst permits while your crew stays on the job.
More Illinois permitting guides
DuPage County
Read guide →Glen Ellyn
Read guide →Glendale Heights
Read guide →Elmwood Park Building Permit Guide
Read guide →Evanston Building Permit Guide
Read guide →Fayette County Building Permit Guide
Read guide →This guide is provided by Alliance Permitting for general information about Elmhurst permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.