Inside Carpentersville, permits come from the Community Development Department, Room 206 of Village Hall, 1200 L.W. Besinger Drive (847-551-3478). Roof, siding, fence, HVAC, water heater and solar applications can go to permits@cville.org as PDFs; jobs that need lot coverage or structural review, such as decks, sheds and driveways, go in by mail or in person. Most plan reviews take up to two weeks, every contractor must be registered with the village, and common residential permits cost $50 to $150.
What requires a building permit in Carpentersville?
The village requires a permit from Community Development before new construction, additions, structural repairs and alterations, interior or structural demolition, installing or replacing mechanical and plumbing systems, site and flat work, excavation, stormwater facilities, underground utilities and site restoration. Its “When are Permits Required?” list (revised July 19, 2022) runs from accessory structures to water softeners and marks the jobs that can be issued over the counter, such as residential A/C replacements, roofing, siding, sewer repairs, garage overhead doors and water heaters.
Permit needed
- Decks, garages, gazebos, pergolas and porches
- Sheds of 48 square feet or more
- Fences, patios, service walks and driveways
- Pools and spas 24 inches deep or more
- Retaining walls 24 inches or taller
- Roofing, siding, windows, exterior doors and skylights
- Cabinetry runs of 4 feet or more, insulation and remodeling
- Healthy tree removal on public or private property
No permit
- Painting, wallpaper, gutters and soffit or fascia covers
- Sheds under 48 square feet
- Retaining walls under 24 inches
- Fixture swaps with no new wiring or piping (shower bases and tubs excepted)
- Swing sets, basketball goals and inflatable pools under 24 inches
- Demolishing an accessory structure of 120 square feet or less
Even when Fire, Engineering or Public Works must also approve a project, all applications and drawings go to Community Development. Starting work before getting a required permit costs at least $150.
What Carpentersville decides and what the state holds
Carpentersville adopts its building rules and fees in its Municipal Code; the permit fees in Section 20.02.010 were amended by Ordinance No. 24-16, approved by the Village Board on April 2, 2024 and in effect from January 2025. The village’s permit guide cites the 2018 International Residential Code, the 2017 National Electrical Code and the 2021 Illinois Energy Conservation Code for HVAC work. Plumbing work follows the Illinois Plumbing Code under state-licensed plumbers, and roofers carry the state roofing license.
Short on time to read all of this?
Get a free quote →Carpentersville building department: who handles permitting
The Community Development Department runs planning, zoning, building permits and inspections and code enforcement for the village. Building staff review plans and issue every construction permit, and Planning and Zoning staff check patios, decks, garages and pools against setbacks and lot coverage. Land outside the village limits is handled by Kane County (see the Kane County building permit guide).
| Detail | Information |
|---|---|
| Office | Community Development Department, Village Hall, 1200 L.W. Besinger Drive, Room 206, Carpentersville, IL 60110 |
| Phone and fax | 847-551-3478; fax 847-426-0864 |
| permits@cville.org | |
| Hours | Monday to Friday, 8:30 a.m. to 4:30 p.m. |
| Village Hall main line | 847-426-3439 |
| Payment | Online payment portal, mail or the Village Hall drop box |
Carpentersville permit types
Residential work uses the Residential Permit Application with the checklist for that project in the village’s Residential Permit Guide; commercial, sign, mechanical, plumbing and sewer, and electrical work each have their own application. Fill in every field: if you are doing the work yourself, list yourself as the contractor. Surveys must be current, to scale and show every existing garage, shed, pool, walk and driveway, or the review takes longer.
Residential permits
- Email-eligible jobs. A/C and furnace replacements, fences, siding, roofs, solar panels and water heater replacements can be sent to permits@cville.org as PDFs (no JPGs), with the job address in the subject line.
- Paper jobs. Anything needing lot coverage calculations or structural review, including decks, sheds, driveways and service walks, goes by mail or in person to Room 206.
- Plat-based projects. Garages, decks, patios, pools and chicken coops need a plat of survey with the new work drawn to scale. A chicken coop also needs proof of notice to neighbors and, for renters, the landlord’s approval; coops and pens stay 10 feet from property lines and out of sight of the street, with at least 10 square feet per hen, a coop of no more than 50 square feet and a pen of no more than 100.
- Roofs. No more than two layers of roofing are allowed, with ice and water shield to the 2018 residential code.
- Fences. Six-foot fences are allowed only in side and rear yards, and no part of a fence may sit forward of the front corner of the house except a 3-foot fence that meets Section 16.18.030. Boards run vertically (split rail excepted), chain link must be 11-gauge or heavier, posts go at least 30 inches deep, and the fence may not block storm water.
- Decks. Post holes at least 42 inches deep, a guard on any surface 30 inches or more above grade, a handrail on stairs with four or more risers, and inspections of the post holes, the framing (on decks under 48 inches high) and the finished deck.
- Sheds and garages. Neither may sit in a setback or easement or be used as living space; sheds top out at 15 feet and need an anchored foundation, and either building within 10 feet of the house needs 5/8-inch fire-rated drywall. A detached garage needs a 4-inch slab pitched toward the door, roof framing for a 25-pound snow load and wiring in metal conduit.
- Driveways. Asphalt, brick or concrete only, no wider than 22 feet where it crosses the public sidewalk or anywhere including ribbons, with front-yard coverage capped at 45%; concrete is 6 inches thick (or 5 inches with mesh) on 4 inches of compacted gravel.
- Demolition. A house demolition permit is not issued until water and sewer services are cut off at the mains, and a garage demolition permit waits for the replacement garage permit.
Not sure this scope needs a permit?
Get a free quote →Building or remodeling a home here? Alliance handles home building permits, so the crew isn't waiting on the counter.
Commercial permits
Commercial, industrial, restaurant and office projects use the Commercial Permit Application, with separate electrical, mechanical and plumbing and sewer applications and a Certificate of Occupancy application. A change of use, tenant, occupancy or business owner needs a permit even when no construction is planned (fee only).
For tenant improvements and new commercial builds, Alliance handles commercial permit filing through issuance. More on this: commercial building permits explained.
What comes before the building permit
- Zoning cases. Annexations, code appeals, concept plans, planned unit developments, plats of subdivision, special uses, variances and rezonings are reviewed by planning staff, who make recommendations to the Planning and Zoning Commission and the Village Board.
- Homeowner association approval. Several checklists ask for an HOA approval letter where an association applies.
- Right-of-way work. Driveway approaches need a cash bond, and sewer repairs in the right-of-way may need a bond sized to the work.
Carpentersville permit costs and fees
Permit fees are set in Section 20.02.010 of the Municipal Code, amended by Ordinance No. 24-16 with new rates from January 2025. The village’s Residential Permit Guide prints the fee for each common project, payable when the permit is issued:
Rather talk it over?
Call 1-855-478-4290 →| Work | Fee |
|---|---|
| Roof, siding, fence, shed, water heater, windows and doors | $50 each |
| HVAC replacement | $50 per unit |
| Deck, gazebo or pergola | $70 |
| Driveway / ribbons only | $75 / $40 |
| Patio / walkway or stoop | $75 / $40 |
| Detached garage | $150, plus $50 electrical |
| Electric service upgrade | $75 for 100 amps, $100 for 200 amps |
| Above-ground pool | $125 permanent; $50 first inflatable setup; $25 reinstall |
| Solar PV | $10 per $1,000 of value (minimum $250) + $0.20 per sq ft of panels (minimum $50) + $100 fire review |
| Chicken coop | $50, plus $25 chicken license |
| Sewer repair | $50 (right-of-way bond may apply) |
| Re-inspection | $60 |
| Starting work without a permit | At least $150 |
Worked example from the solar fee rule: a $30,000 rooftop system with 400 square feet of panels pays $300 on value (above the $250 minimum), $80 on panel area and the $100 fire review, or $480. The guide is undated, while the adopted rates are those in Section 20.02.010 as amended by Ordinance No. 24-16, so confirm the fee with Community Development before filing. Online payments are processed the next business day and add a user fee of $0.50 for an eCheck or the greater of $1 or 2.25% for a card.
Trade permits and who may pull them
Since January 1, 2025 every contractor working in the village, subcontractors included, must register with Carpentersville under Section 15.34.040 of the Municipal Code. Email the application, certificate of insurance naming the village as certificate holder, $10,000 surety bond and licenses to permits@cville.org with “Contractor Registration 2026” in the subject, and send it apart from any permit submittal.
Rather not deal with the building department?
Get a free quote →- Plumbers, roofers and fire-protection contractors: the registration form asks these state-licensed trades for a copy of the state license or registration and lists no bond, insurance or fee for them. Water heater jobs also need the 055 and 058 license copies and a letter of intent signed by the license holder (notarized if not incorporated).
- Electricians: a copy of a municipal electrical license, the bond and the insurance certificate.
- General contractors, subcontractors and other trades: the bond, insurance and a $100 fee, waived for businesses with a Carpentersville address. Staff send the fee and payment link once the registration is processed.
- HVAC installers: each replacement unit is a separate $50 permit filed with the unit specifications and job cost; the guide requires a programmable thermostat under the 2021 energy code, a disconnect within sight of the equipment and a safety check at start-up, with one final inspection.
- Homeowners: an owner doing work in an owner-occupied home files the village’s Homeowner Affidavit; the roof checklist accepts the affidavit in place of a roofing license.
How to apply for a Carpentersville building permit
Look up the project in the Residential Permit Guide or use the commercial application.
Make sure every contractor and subcontractor holds a current village registration.
Email eligible jobs to permits@cville.org; mail or bring the rest to Room 206.
Staff call or email if anything is missing; most reviews take up to two weeks.
After approval the reviewer emails the permit number and payment options.
The permit card and plans arrive by email; print the card and place it in a window.
Review, corrections and what causes delay
Expect up to two full weeks for most plan reviews, sometimes less. Incomplete emailed packets are returned to the applicant, and a plat of survey that does not show every existing structure and improvement lengthens the review and may have to be redrawn. Leave a detailed voicemail at 847-551-3478 if no one answers; staff check messages often.
Inspections and certificates in Carpentersville
Request inspections at least one business day ahead and before 3 p.m., by calling 847-551-3478 or emailing permits@cville.org with the permit number, date, inspection type, a morning (8 a.m. to noon) or afternoon (noon to 3 p.m.) preference and the name and phone of the person on site. Paving projects need a post-hole or pre-pour base inspection before concrete or asphalt goes down, any work that will be covered needs a rough inspection, and every project ends with a final once it is 100% complete. Inspectors need access to every work area and an approved plan set on site. A failed inspection brings a $60 re-inspection fee. Commercial occupancies use the village’s Certificate of Occupancy application.
Want this handled start to finish?
Get a free quote →Illinois building code in Carpentersville
Carpentersville enforces the codes adopted in its Municipal Code, with the 2018 residential code and 2017 electrical code cited in its residential permit guide. FEMA’s Community Status Book lists the Village of Carpentersville (community 170322) as participating in the National Flood Insurance Program, with a current flood map dated August 3, 2009, and in the Community Rating System at class 6 since October 1, 2011, a 20% discount on flood insurance premiums.
Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline
Carpentersville building permit FAQs
Can I email my permit application in Carpentersville?
Yes for A/C, furnace, fence, siding, roof, solar and water heater permits; jobs needing lot coverage or structural review, such as decks and sheds, go by mail or in person.
Do contractors have to register with the village?
Yes. Since January 1, 2025 every contractor and subcontractor must register, with a $10,000 bond and insurance; general contractors pay $100 unless based in the village.
Does a shed need a permit?
Only if it is 48 square feet or larger; the permit costs $50.
How much is a roof permit?
$50; roofing permits can be issued over the counter, and no more than two roofing layers are allowed.
How long does plan review take?
Up to two weeks for most plan reviews; staff call or email when the permit is approved.
How do I schedule an inspection?
Call 847-551-3478 or email permits@cville.org before 3 p.m. one business day ahead, choosing a morning or afternoon slot.
What if I started work without a permit?
A minimum $150 fee applies to work started before a required permit is issued.
Carpentersville permit search and official resources
For a permit’s status, call Community Development at 847-551-3478 or email permits@cville.org with the job address. Past permits and plans are village records under the Freedom of Information Act: file through the village’s online FOIA Center, or send a letter, fax or email to the FOIA Officer at 1200 L.W. Besinger Drive. The village answers within 5 business days (21 for commercial requests) and charges $0.15 a page for copies over 50 pages.
Inspections are where schedules slip.
Get a free quote →- Carpentersville building permits
- When are permits required? (PDF)
- Residential Permit Guide
- Forms and permit applications
- Contractor registration application
- Schedule an inspection
- Online permit payments
- Planning and Zoning
- Community Development Department
- Freedom of Information Act
- Online FOIA Center
- FEMA Community Status Book, Illinois
Simplify Carpentersville permitting with Alliance Permitting
Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Carpentersville sooner?
Let Alliance prepare, file, and track your Carpentersville permits while your crew stays on the job.
More Illinois permitting guides
Kane County
Read guide →Geneva
Read guide →North Aurora
Read guide →Cass County Building Permit Guide
Read guide →Champaign Building Permit Guide
Read guide →Champaign County Building Permit Guide
Read guide →This guide is provided by Alliance Permitting for general information about Carpentersville permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.