Inside the City of Canton, permits come from the Planning & Zoning Department on the second floor of City Hall, 2 N. Main St. (309-649-5338, weekdays 8 a.m. to 5 p.m.), not from Fulton County, which lists Canton among the towns with their own zoning. One application covers zoning approval and the building permit. The fee follows the estimated project cost, from $10 for jobs up to $500 to $433 plus $2.50 per $1,000 above $100,000. New homes average about 72 hours to process and new commercial buildings 3 to 4 weeks. Roofing contractors need a city license on top of their state one.
What requires a permit in Canton?
The city requires a permit, and compliance with its codes, whenever an owner or agent plans to construct, enlarge, alter, repair, move or demolish a building, or change its occupancy or use. Its pages list the specific triggers:
Residential
- New homes, additions, garages, porches, carports and decks
- Remodels and alterations that change structure, stairs, egress, light or ventilation
- Fences
- Pools able to hold 24 inches of water or more (above-ground or in-ground)
- Retaining walls over 4 feet high
- Demolition, including debris removal, fill and final grading
- Solar panel projects and curb cuts
Commercial
- New buildings and additions
- Remodels, structural changes and significant interior build-outs
- Changes of occupancy or use
- Installing, altering or replacing electrical, gas, mechanical or plumbing systems
- New, replaced, moved or resized signs
The permit form excludes minor repairs that do not touch the items listed above from the definition of alteration. Because the residential page asks owners to call the department before beginning any work to see whether a permit is required, a quick call settles borderline jobs.
What the city decides and what the state holds
The city council adopts Canton’s building and zoning codes and its permit fees; rezonings, special uses and variances go through the Joint Planning & Zoning Commission to the council. The state sets the plumbing code and licenses plumbers, licenses roofing contractors, and sets the energy and accessibility codes; Canton’s permit form lists the Illinois State Plumbing Code and the Illinois Accessibility Code alongside its own adopted codes, and its residential checklist cites the state energy law.
Canton building department: who handles permitting
The Planning & Zoning Department handles residential and commercial permits, zoning information and forms, with separate directors for commercial and for residential planning and zoning. The city’s Building Inspector and Fire Prevention Code Inspector inspect new businesses before they open, and the Canton Water Department signs off on demolition and new construction applications before they reach Planning & Zoning.
Short on time to read all of this?
Get a free quote →| Item | Details |
|---|---|
| Office | Planning & Zoning Department, second floor, City Hall, 2 N. Main St., Canton, IL 61520 |
| Phone | 309-649-5338 (Planning & Zoning); the county also lists 309-647-5022; City Hall and Mayor’s Office 309-647-0065 |
| Hours | Monday to Friday, 8 a.m. to 5 p.m. |
| Filing | In person, or by email for residential applications and supporting documents |
| Planning body | Joint Planning & Zoning Commission, second Monday at 5:30 p.m. |
Outside the city limits, Fulton County’s Zoning Office in Lewistown issues zoning permits for unincorporated land, and the county health department in Canton issues septic and well permits; see our Fulton County building permit guide.
Canton permit types
The city uses one permit application (revised in 2025) with boxes for pools, fences, curb cuts, residential building work, commercial buildings, demolition, signs, solar panels and alterations.
Residential permits
- New single-family homes and duplexes: the checklist asks for the completed application, two copies of the site plan, two sets of building plans (which need not be architect-sealed), engineering specifications for trusses, I-joists, LVLs and beams at the time of application, and an energy compliance check, by REScheck or a prescriptive checklist.
- What goes on the house plans: a scaled site plan with property lines, setbacks, driveway width and a north arrow; elevations of all four sides; a foundation plan with footing sizes, wall height, rebar spacing, vapor barrier, egress windows and the sump pump; floor plans with living area, room sizes, openings and header sizes; the dryer vent length; and a wall section showing insulation R-values, ice shield, overhang and sheathing.
- Smaller residential jobs: the application, fee and a drawing of all structures with dimensions and setbacks; the city asks you to allow 4 days for processing.
- Pools: every pool needs a fence around it under Section 4-3-4 of the city code.
- Ramps: the city publishes residential ramp specifications.
Building or remodeling a home here? Alliance handles residential permit expediting, so the crew isn't waiting on the counter.
Commercial permits
A new commercial building needs three sets of construction documents prepared by a registered design professional, with the application, the commercial checklist and the fee; allow 3 to 4 weeks. The state Architecture Practice Act also requires a design professional for interior alterations that change life safety or structure. The city’s commercial checklist asks the designer to mark where each item appears in the plans or specifications: a cover sheet naming the design firm and listing the codes, design criteria such as use group, construction type, floor area, sprinklers, height and occupant load, the zoning and parking figures, sealed and signed drawings, and COMcheck energy compliance. For other remodels, send the department the scope of work first and it will say whether a permit, sealed documents and inspections are needed. Developers and contractors can book a joint meeting with city staff to get early input on zoning, utilities, fire safety and building code requirements.
Not sure this scope needs a permit?
Get a free quote →For tenant improvements and new commercial builds, Alliance handles commercial permit applications through issuance. More on this: commercial building permits explained.
What comes before the building permit
- Zoning: look up the property’s classification on the city’s zoning lookup map; a use that is not permitted needs a rezoning, special use or variance from the Joint Planning & Zoning Commission and the City Council.
- Water Department sign-off: demolition and new construction applications must be signed by the Canton Water Department first.
- Contaminated soil zones: some former gas station sites are covered by Highway Authority Agreements, and digging in the right-of-way inside those zones needs a city excavation permit, even for utilities that are otherwise exempt.
Canton building permit fees
The permit application carries the city’s fee scale, based on the estimated cost of the project; fees are non-refundable.
| Estimated project cost | Permit fee |
|---|---|
| $1 to $500 | $10 |
| $500.01 to $2,000 | $10 for the first $500, plus $1.50 for each additional $100 or fraction |
| $2,000.01 to $25,000 | $32.50 for the first $2,000, plus $6 for each additional $1,000 or fraction |
| $25,000.01 to $50,000 | $170 for the first $25,000, plus $4.50 for each additional $1,000 or fraction |
| $50,000.01 to $100,000 | $283 for the first $50,000, plus $3 for each additional $1,000 or fraction |
| Over $100,000 | $433 for the first $100,000, plus $2.50 for each additional $1,000 or fraction |
| Above-ground pool / in-ground pool | $15 / $25 |
| Fence | $10 |
| Curb cut | $25 |
Rather talk it over?
Call 1-855-478-4290 →Two worked examples: a $40,000 remodel pays $170 + (15 × $4.50) = $237.50, and a $200,000 new house pays $433 + (100 × $2.50) = $683. The band starting figures do not line up exactly with the band below them (the scale gives $170 at $25,000, where the lower band reaches $170.50), so check projects near a band edge with the department. Demolition, signs, solar projects and alterations are also priced on this scale.
Trade permits and who may pull them
Canton’s commercial permit rule covers electrical, gas, mechanical and plumbing systems, and the permit application records the contractor and, where relevant, the state roofing license number and the plumbing license number.
- Roofing contractors: anyone doing roofing work for profit in Canton must hold a city roofing license under Ordinance No. 1989 (effective January 1, 2010). The application requires a copy of the contractor’s state license, and the city license expires one year after approval. The city keeps a list of licensed roofers, updated March 3, 2026, and reminds roofers that ice protection under the shingles is required.
- Plumbers: plumbing follows the Illinois State Plumbing Code, and the application asks for the plumbing license number.
- Design professionals: required for new commercial buildings and for interior alterations that change life safety or structure; residential plans need no seal.
The permit is applied for by the owner or an authorized agent; the application asks the signer to agree to follow the city’s municipal code and Illinois law.
How to apply for a building permit in Canton
Look up the property on the city’s zoning map and call Planning & Zoning to confirm the work needs a permit and fits the zone.
For a rezoning, special use or variance, file with the Joint Planning & Zoning Commission and publish the notice of hearing in the Daily Ledger 18 days before the meeting.
Sketch every structure on the lot with dimensions and distances to all four property lines; new homes add site plans, building plans and engineering specifications, commercial jobs three sets of sealed documents.
For demolition or new construction, take the application to the Canton Water Department for signature.
Bring or email the application to Planning & Zoning with the fee from the cost scale.
Begin work only once the permit is issued, and schedule the inspections the department requires.
Rather not deal with the building department?
Get a free quote →Review, corrections and what causes delay
The city’s own timing guides are short: about 72 hours on average for a new single-family home, 4 days for other residential permits and 3 to 4 weeks for new commercial buildings. Delays come from missing pieces the checklist calls for, such as beam specifications, the energy compliance check or the site plan, or from a use that needs a commission hearing first; the city says complete plan information shortens its review. Subdivision covenants are the owner’s responsibility, and so is finding every easement on the lot.
Inspections in Canton
Work under a building permit is inspected during and after construction to make sure it meets the codes. Every new business is inspected by the city’s Building Inspector and Fire Prevention Code Inspector before it opens; the city notes these code inspections are not the same as a private inspection for a purchase or lease, which it encourages buyers and tenants to get. On demolitions, the permit holder must abandon all water and sewer services properly, call the city before backfilling for a mandatory inspection, and return any city meters found in the building. Ask Planning & Zoning which stages apply to your permit when you pick it up.
Building codes in Canton
Canton’s permit application lists the 2003 editions of the International Building, Residential, Fire, Mechanical, Fuel Gas, Existing Building, Property Maintenance, Zoning and Private Sewage Disposal codes and the ICC Electrical Code, with the 2004 Supplement, plus the Illinois State Plumbing Code and the Illinois Accessibility Code; the roofing letter describes the 2003 IRC as the minimum the city enforces. For energy, the application refers to the state-mandated 2009 IECC. FEMA lists Canton (community 170242) as participating in the National Flood Insurance Program, with a current map dated February 4, 2011 that is marked as having no base flood elevations.
Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline
Canton permit FAQs
How much does a building permit cost in Canton?
It depends on the estimated cost: $10 up to $500, rising on a sliding scale to $433 plus $2.50 per $1,000 over $100,000. A $200,000 house pays $683.
Want this handled start to finish?
Get a free quote →Do I need a permit for a fence or pool in Canton?
Yes. A fence permit is $10; pools that hold 24 inches of water or more need a $15 (above-ground) or $25 (in-ground) permit, and every pool must be fenced.
How long does a permit take?
About 72 hours on average for a new single-family home, 4 days for other residential work and 3 to 4 weeks for new commercial buildings.
Can I email my application?
Yes, residential applications and supporting documents can be emailed to the Planning & Zoning Department.
Does my roofer need a Canton license?
Yes. Roofing for profit in Canton requires a city license, renewed yearly, in addition to the state roofing license.
Does Fulton County issue permits in Canton?
No. Canton runs its own zoning and permits; the county’s Zoning Office covers unincorporated land.
How do I get a variance or rezoning?
Petition the Joint Planning & Zoning Commission, which meets on the second Monday at 5:30 p.m., after publishing notice 18 days ahead; the City Council makes the final decision.
Canton permit records and official resources
City council agendas, minutes, resolutions and ordinances are posted in the city’s online records library. For copies of permits or other city records, make a Freedom of Information Act request to the city’s general FOIA officer at the Mayor’s Office, 2 N. Main St., in person or, preferably, in writing, using the city’s request form or email; the city may charge the cost of reproducing copies. Questions about FOIA forms go to the Mayor’s Office at 309-647-0065.
Inspections are where schedules slip.
Get a free quote →- Planning & Zoning Department
- Residential development and forms
- Commercial development and forms
- Development zoning, permitting and licensing
- Permit application and fee scale (revised 2025)
- Checklist for new single-family dwellings and duplexes
- Items to include on residential plans
- Commercial technical submission checklist
- Roofing contractor application
- City of Canton zoning map (February 28, 2022)
- Joint Planning & Zoning Commission
- Agendas, minutes, resolutions and ordinances
- Freedom of Information Act requests
- Fulton County list of communities with their own zoning
- FEMA Community Status Book, Illinois
Simplify Canton permitting with Alliance Permitting
Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Canton sooner?
Let Alliance prepare, file, and track your Canton permits while your crew stays on the job.
More Illinois permitting guides
Fulton County
Read guide →Peoria
Read guide →Tazewell County
Read guide →Carbondale Building Permit Guide
Read guide →Carpentersville Building Permit Guide
Read guide →Cass County Building Permit Guide
Read guide →This guide is provided by Alliance Permitting for general information about Canton permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.