Skip to main content
Municipal GuideOhioCuyahoga County · Shaker Heights

Shaker Heights, Ohio Building Permit Guide

To get a building permit in Shaker Heights, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

Shaker Heights’ Building & Housing Department at City Hall, 3400 Lee Road, issues permits for all residential and commercial construction, taking applications only online through CitizenServe.

Authority: Shaker Heights Building & Housing DepartmentFiling: CitizenServe onlyPhone: 216-491-1460
Office
3400 Lee RoadCounter 8:30 a.m.–3:30 p.m.
Alterations fee
$5 per $1,000Residential, $75 minimum
Exterior work
Planning approvalPlus Architectural Board of Review
Selling a home
Point of Sale inspection$200 for a single-family home

In the City of Shaker Heights, the Building & Housing Department at City Hall, 3400 Lee Road (216-491-1460), issues permits for every residential and commercial construction project. Applications, contractor licenses and Point of Sale filings are accepted only on the city’s CitizenServe platform, with no paper applications. Exterior work also needs Planning Department approval and often a review by the Architectural Board of Review. Under Chapter 1305 of the codified ordinances, a residential alteration costs $5 per $1,000 of valuation, with a $75 minimum.

What requires a building permit in Shaker Heights?

The department’s rule of thumb is that almost every construction job beyond finishes such as paint, flooring and window coverings needs a permit, which the city also calls a plan approval. Putting back what was there is not an exception: kitchen and bath remodels, driveway and garage replacements, and new furnaces, air conditioners, boilers and water heaters all need permits. A counter or cabinet swap with no plumbing or electrical change usually does not, but one that includes a sink, built-in oven or range, or dishwasher does.

No building permit (city list)

  • One-story detached sheds or playhouses up to 200 sq ft, and playground structures
  • Retaining walls up to 4 feet that support no surcharge
  • Unattached decks up to 200 sq ft and no more than 30 inches above grade that do not serve the required exit door
  • Window awnings projecting no more than 54 inches without extra support
  • Flat at-grade patios
  • Painting, papering, tiling, carpeting, cabinets and counters where fixtures stay put

But still needs Planning approval

  • The shed, retaining wall, deck and awning cases at left
  • A patio attached to a driveway
  • Swings and play equipment, which must meet zoning location rules
  • Any exterior modification, renovation or addition, even when no building permit is needed
  • Roof, window and door replacements and landscape structures

Minor electrical, gas, mechanical and plumbing work, such as replacing a breaker of the same rating or clearing a stoppage, is also exempt. Emergency equipment repairs may go ahead, but the permit application must be filed by the next working business day.

What Shaker Heights decides and what the state holds

The construction standards are the Ohio codes, which the Building & Housing Department applies to residential and commercial work. Shaker Heights adds a great deal of its own: the Chapter 1305 fee schedule, the Chapter 547 contractor license, Planning Department and Architectural Board of Review approval for exterior work, the Landmark Commission, the Point of Sale inspection on home sales, and rental and owner-occupied housing inspections. The state collects its 1% or 3% surcharge on permit fees.

Short on time to read all of this?

Get a free quote →

Shaker Heights building department: who handles permitting

The Building & Housing Department handles construction permits, plan review, building inspections, contractor licenses and the city’s housing inspection programs. Interior-only projects need approval only from the Building Department; anything on the exterior also goes to the Planning Department, which administers the zoning code and manages the Architectural Board of Review.

Shaker Heights permit contacts
DetailInformation
OfficeBuilding & Housing Department, City Hall, 3400 Lee Road, Shaker Heights, OH 44120
Phone216-491-1460 (permits); 216-491-1461 (building inspections); 216-491-1471 (housing inspections)
Emailbuilding@shakerheightsoh.gov
Counter hoursMonday to Friday, 8:30 a.m. to 3:30 p.m.; phone and email until 5 p.m.
FilingCitizenServe only; no paper applications
Planning and design reviewPlanning Department, 216-491-3216, planning@shakerheightsoh.gov

Shaker Heights permit types

CitizenServe carries every building, electrical, plumbing and heating permit, the contractor license and the Point of Sale application. The department’s guides set out residential plan requirements, the inspections each kind of work needs, common residential permits with their required approvals, driveway requirements and energy rules for windows.

Residential permits

  • Drawings. Jobs that need plan review take three sets of drawings, prepared to the specifications in the residential code.
  • Fences. The fee schedule sets a $75 permit for fences six feet or higher; as exterior work, a fence also needs Planning Department approval.
  • Driveways. A new or replacement residential driveway is $65 and a repair $50; aprons and sidewalk blocks in the right-of-way are $35 each.
  • Homeowners. An owner may pull a permit only for work they do themselves or that a licensed contractor is paid to do, and must complete a homeowner’s affidavit; the city requires anyone doing permit work to be insured.

Commercial permits

All commercial plans must be stamped by a registered architect. Commercial building fees for new space use the Chapter 1305 multipliers for the building’s use group and construction type, with a $125 minimum, and commercial alterations are $10 per $1,000 of valuation. New business occupancies also need the city’s business license, which it treats as the commercial occupancy permit.

Not sure this scope needs a permit?

Get a free quote →

What comes before the building permit

  • Planning Department. Approves every exterior modification, renovation or addition, and advises whether the project must go to the Architectural Board of Review.
  • Architectural Board of Review. Reviews new buildings and exterior changes including additions, window and door changes, auxiliary structures, decks, re-siding and re-roofing. Submissions go through the city’s permit portal, and the board meets virtually on its regular schedule.
  • City Planning Commission, Board of Zoning Appeals and Landmark Commission. Zoning relief, larger development questions and landmark properties go through these boards, all supported by the Planning Department.
  • Obstruction deposits. New house work on lots up to 100 feet of frontage carries a minimum $1,000 deposit against damage to public property.

Shaker Heights permit costs and fees

Fees come from Chapter 1305 of the Shaker Heights codified ordinances; the copy the city posts is marked Rev. 3/2017 and ends with the history note Ordinance 12-120, enacted December 17, 2012. New buildings and additions are priced by new floor area times a multiplier from a table of use groups and construction types, and alterations by valuation. A 3% surcharge applies to fees under the Ohio Building Code and 1% to fees under the Residential Code of Ohio.

Selected fees, Chapter 1305 (rev. 3/2017)
WorkFee
New construction or addition, one-, two- and three-family (R-3)New floor area × 0.39 to 0.55 by construction type (0.39 for type 5B, 0.43 for 5A); minimum $75
Residential garage or unfinished basement / finished basementArea × 0.12 / area × 0.24
Residential alteration or repair$5 per $1,000 of valuation; minimum $75
Commercial alteration or repair$10 per $1,000 of valuation; minimum $125
Plan reviewActual cost to the city, with a deposit paid on application
Electrical, new residential space$75 plus $10 per 100 sq ft, all floors
Electrical, residential alteration$75 plus $1 per fixture, switch, receptacle or breaker; $5 per 220-volt appliance or panel
Plumbing, new residential space / alteration$75 plus $10 per 100 sq ft / $75 plus $3 per fixture
Repipe, new sewer connection or waterproofing (residential)$75 each
Heating unit replacement up to 250,000 BTU / combination unit / residential air conditioner$75 / $150 each / $75 each
Roof or siding / fireplace or stove$75 / $50
Demolition$5 per 1,000 sq ft; minimum $50 residential, $100 commercial
Reinspection$30

Rather talk it over?

Call 1-855-478-4290 →

Worked examples from the schedule: a 2,000-square-foot R-3 house of construction type 5B is 2,000 × 0.39, or $780, and a $40,000 residential kitchen remodel is 40 × $5, or $200, each before the 1% surcharge, trade permits and the plan review charge. The demolition fee may be waived when the building is replaced with one approved by the Architectural Board of Review. The ABR adds its own filing fees (schedule effective April 1, 2009): $200 for a new one- or two-family house, $75 to $300 for additions depending on size, $100 for decks, porch conversions, sunrooms and siding, $75 for window, door and other residential alterations, and $50 for roofs and awnings.

Other lines in Chapter 1305 cover site and specialty work: curb cuts at $2 a foot with a $20 minimum, commercial parking lots and driveways at $75 up to 3,000 square feet plus $5 per extra 1,000, permanent signs at $1 a square foot with a $45 minimum, murals at $100, residential fire suppression at $75 plus $1.50 per device, and new or altered interior gas lines at $50 for a home.

Trade permits and who may pull them

Electrical, plumbing and heating or air-conditioning permits are filed on CitizenServe like building permits, and building staff inspect the work whether a contractor or the homeowner did it.

  • Contractor license. Every contractor doing permit work, plus exterior painters, landscapers and anyone doing hot work, must hold a Shaker Heights contractor license under Chapter 547, renewed each year. Licenses expire December 31, and renewals may be filed from December 1.
  • Requirements. The city checks insurance, a bond and Ohio Construction Industry Licensing Board licensing according to the type of license. Bodily injury liability must be at least $500,000/$1,000,000 or $2,000,000 aggregate, and property damage at least $50,000.
  • Hiring. Owners may hire a contractor not yet on the city’s list, as long as its license has never been suspended; it must be licensed before the permit issues. The city does not recommend or vet contractors and points residents to its searchable licensed-contractor database.
  • Homeowners. Owners may do their own permit work with a homeowner’s affidavit, but may not take out a permit for a friend to do the work.

Rather not deal with the building department?

Get a free quote →

How to apply for a Shaker Heights building permit

1. Sort interior from exterior

Interior-only work goes straight to the Building Department; exterior work starts with the Planning Department and, where needed, the ABR.

2. Check the contractor license

Make sure each contractor is licensed with the city for the current year, or will be before the permit issues.

3. Open a CitizenServe account

All applications, plans and payments go through the portal; paper applications are not accepted.

4. Upload drawings

Three sets for plan review, with commercial sets stamped by a registered architect; pay the plan review deposit.

5. Track and pay

Follow the application status online and pay the permit fees there.

6. Book inspections

Request each inspection at least 24 hours ahead online, by email or by calling 216-491-1461.

Review, corrections and what causes delay

Exterior projects add a step, because Planning approval and any ABR review come before the building permit, and the ABR works to its published meeting schedule. Plan review is billed at the city’s actual cost, whether city staff or a hired plan review contractor does it, against the deposit paid with the application. Work started without a permit can bring a fine, and covered work, such as wiring behind drywall, must be opened up for inspection.

Inspections and Point of Sale in Shaker Heights

Building inspections are requested on CitizenServe, by email or at 216-491-1461, at least 24 hours in advance; the department’s guide lists which inspections each kind of work needs, and a reinspection costs $30. Housing property maintenance inspections are booked separately at 216-491-1471.

Selling a house brings a separate step. Before signing a contract with a buyer, the seller files the Point of Sale application and books a visual inspection of the interior and exterior, which takes about 90 minutes for a one- or two-family home; the Fire Department also inspects common areas of apartment buildings. Before transfer, every violation must be fixed or 150% of the estimated repair cost placed in escrow with the city. The fee is $200 for a single-family home, $300 for a two-family home, $150 for a condominium, and $200 plus $50 per additional unit for an apartment building. Allow at least two weeks, or three to four in the spring market; the city also offers a Certificate of Compliance lookup tool.

Want this handled start to finish?

Get a free quote →

Ohio building code in Shaker Heights

The department links the current residential and commercial codes from its permit page and applies them with the city’s own ordinances. FEMA’s Community Status Book lists Shaker Heights (community 390129) as participating in the National Flood Insurance Program, with its current flood map dated December 3, 2010.

Ohio has statewide building codes: the Ohio Building Code for commercial and other nonresidential buildings and the Residential Code of Ohio for detached one-, two- and three-family dwellings. Only departments certified by the Ohio Board of Building Standards may approve plans and inspect, and residential rules are uniform statewide. How Ohio’s statewide code works

Shaker Heights permit search and official resources

Permit applications and their status are kept in CitizenServe, along with the licensed-contractor database, and the Certificate of Compliance lookup covers Point of Sale cases. For older permit or plan records on a Shaker Heights address, ask the Building & Housing Department at 216-491-1460 or building@shakerheightsoh.gov.

Inspections are where schedules slip.

Get a free quote →

Shaker Heights building permit FAQs

Can I file a paper permit application in Shaker Heights?

No. Permits, contractor licenses and Point of Sale applications are filed only on CitizenServe.

Do I need a permit to replace windows or a roof?

Yes. A roof or siding permit is $75, and exterior changes such as roofs, windows and doors also need Planning Department approval and may go to the Architectural Board of Review.

Does a small shed need a permit?

A one-story detached shed of 200 square feet or less needs no building permit, but it still needs Planning Department approval.

Can a friend do the work on my permit?

No. A homeowner may pull a permit only for work they do personally or for work by a paid, licensed contractor, and must sign a homeowner’s affidavit.

How much is a permit for a kitchen remodel?

Residential alterations are $5 per $1,000 of valuation with a $75 minimum, so a $40,000 remodel is $200, plus trade permits and the 1% state surcharge.

What does selling a house require?

A Point of Sale inspection before you sign with a buyer, $200 for a single-family home, with violations fixed or 150% of the repair estimate escrowed before transfer.

How do I book an inspection?

Request it on CitizenServe, by email or at 216-491-1461, at least 24 hours ahead.

Simplify Shaker Heights permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Ohio. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Shaker Heights sooner?

Let Alliance prepare, file, and track your Shaker Heights permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Shaker Heights permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.