Skip to main content
Municipal GuideNew YorkTown of Irondequoit · Monroe County

Town of Irondequoit, New York Building Permit Guide

Everything contractors, builders and developers need for a Town of Irondequoit building permit — the Building Department and the waterfront flood rules.

Authority: Building DepartmentCode: Uniform Code (local flood law)Phone: 585-336-6026
Monroe County town
About 50,000Just north of Rochester
Lake Ontario and bay
Waterfront flood elevationPeninsula shoreline
No local GC licence
Upstate has no requirementWorker coverage still required
Built-out suburb
Alteration and infillEstablished housing stock

Irondequoit is a Monroe County town of about 50,000 residents on a peninsula between Lake Ontario and Irondequoit Bay, just north of Rochester. Its Building Department at Town Hall, 1280 Titus Avenue, issues permits and inspects work across the town under the Uniform Code and Chapter 98 of the Town Code.

This guide covers the Building Department, the licensing position, the Lake Ontario and bay flood rules, and the codes in force.

This guide covers the Town of Irondequoit, between Lake Ontario and Irondequoit Bay. The City of Rochester and neighbouring Monroe towns run their own building departments and are separate authorities.

🌊

Irondequoit sits between Lake Ontario and its bay, so waterfront flood review is central, and upstate Monroe towns generally do not require a local contractor licence. Much of the town’s shoreline sits in flood zones, so elevation requirements figure in waterfront projects. There is no county or town general-contractor licence, though worker coverage is required. As a fully built-out inner-ring suburb, most work is alteration and infill.

What requires a building permit in Irondequoit?

Permit required

  • New commercial, multi-family and residential construction, additions and change of occupancy
  • Structural alterations, load-bearing changes, foundations, decks and retaining walls
  • Electrical work — services, panels, circuits, solar and EV charging — under the Uniform Code and the referenced National Electrical Code
  • Plumbing under the Plumbing Code of New York State, by a licensed plumber where the jurisdiction requires one
  • Mechanical and HVAC change-outs, and work affecting the Energy Code envelope
  • Re-roofing above the exempt scope, pools, signs, and demolition

Often exempt

  • Minor repairs and maintenance replacing materials in kind
  • One-storey detached sheds and playhouses of 144 square feet or less at a one- or two-family home, where the local law exempts them and zoning allows
  • Painting, flooring, cabinetry and other finish work
  • Like-for-like fixture or appliance swaps with no alteration to wiring or piping

Local amendments and thresholds differ from one jurisdiction to the next, so an exempt list from a neighbouring city is not reliable — a project waved through in one place needs a full permit set in the next. An exemption from a building permit is never an exemption from zoning, the statewide energy code, or any electrical or plumbing permit the municipality requires. Confirm scope with the Building Department before work starts.

Short on time to read all of this?

Get a free quote →

The statewide layers that apply everywhere

Several layers apply on top of the base building code and routinely catch projects owners assume are exempt: the 2025 Energy Conservation Construction Code of New York State, which took effect alongside the Uniform Code (its all-electric requirements for new buildings remain suspended by court order, according to the Department of State); the truss-construction identification requirements carried in Executive Law; and, in shoreline and flood-prone areas, floodplain administration under the local flood damage prevention law. Snow and ice loading is a live structural constraint across most of the state. Locally, the Town of Irondequoit enforces the Uniform Code through its Building Department on Titus Avenue, with flood provisions adopted by local law.

New York builds on one statewide code, the Uniform Code, outside New York City; the 2025 edition and 2025 Energy Code took effect on 31 December 2025 (the all-electric provisions remain suspended by court order). Cities, towns and villages administer it, and local standards stricter than the code need Code Council approval. The Uniform Code in New York

Who handles permitting in Irondequoit?

The Building Department reviews plans, issues permits and inspects residential and commercial work across the Town of Irondequoit.

Irondequoit permitting contact
DetailInformation
AuthorityTown of Irondequoit Building Department
ServesThe Town of Irondequoit
Phone585-336-6026
CounterTown Hall, 1280 Titus Avenue, Rochester, NY 14617; Mon–Fri 8:30am–4:30pm; inspection requests 585-336-6072
Code2025 Uniform Code with local flood provisions
FilingCounter and department submittal
LicensingNo local GC licence; worker coverage required
RecordsPermit records held by the department

There is no statewide contractor licence, and upstate Monroe County towns generally do not require a local general-contractor licence. Contractors working under an Irondequoit permit must keep liability, disability and workers’ compensation insurance on file for the whole project, with the town named as a third-party insured; owners doing their own work file a CE-200 exemption. Plumbing work takes its own town plumbing permit.

Lake Ontario and Irondequoit Bay shoreline parcels sit in flood zones, and as a built-out inner-ring suburb, most projects are alterations, additions and infill.

Not sure this scope needs a permit?

Get a free quote →

Permit types

Residential permits

Residential work is permitted and inspected under the Uniform Code and the town’s local law across an established, largely built-out housing stock. Lake Ontario and Irondequoit Bay shoreline parcels must meet the flood elevation requirements of the town’s flood damage prevention law. Minor in-kind repairs and finish work are generally exempt from a building permit but not from zoning.

Commercial permits

Commercial work goes through department plan review against the Uniform Code, the Energy Code and the fire code, with stamped drawings. Corridor redevelopment along the town’s commercial strips carries site, drainage and change-of-occupancy review.

Licenses, trade classifications and design professionals

Practically, three credential layers appear on New York projects: the local home improvement or contractor registration where the jurisdiction issues one; separately licensed electrical and plumbing trades, licensed locally rather than statewide; and, on commercial and larger residential work, drawings stamped by a New York-licensed architect or professional engineer. Confirm what the Building Department requires for the specific building before filing.

New York has no state general contractor, home-improvement, electrician or plumber licence; licensing is local (New York City and Nassau, Suffolk, Westchester, Putnam and Rockland counties license home-improvement contractors), and the state sets home-improvement contract rules. Contractor licensing in New York

Irondequoit permit costs and fees

Budget the town building permit and plan-review fees, separate electrical, plumbing and mechanical permits, and any flood-zone submission fees on shoreline parcels. Worker coverage is confirmed with the permit rather than charged as a fee.

How Irondequoit permit fees are structured
Fee componentHow it works
Building permitBased on project valuation or square footage; set by the local schedule
Plan checkA percentage of the permit fee or a flat charge, at submittal
Trade permitsSeparate electrical, plumbing and mechanical fees
State surchargesNone: New York has no state permit surcharge, and fees are set locally
Impact and school feesMoney in lieu of parkland on some subdivisions and site plans, where the local planning board requires it
Re-inspections and revisionsAdditional fees for failed inspections, revisions and expired permits

Rather talk it over?

Call 1-855-478-4290 →

New York does not layer a uniform statewide permit surcharge on local charges the way some states do, so the fee is substantially local: each city, town and village sets its own schedule by local law, and neighbouring municipalities on the same road can price the same job differently. A figure from a neighbouring town is not reliable — ask the Building Department for the schedule in force on your filing date.

🧮

Need a real number for a specific Irondequoit project? Send us the scope, address and valuation and we will identify the authority having jurisdiction, the code edition in force and the fee categories that will apply.

Trade permits and who may pull them

Permit required

  • Service installations, panel upgrades, new circuits, solar PV and EV chargers
  • New plumbing, repipes, water heater change-outs, fixtures, backflow and gas piping
  • HVAC installation and change-out, ductwork, venting and commercial kitchen exhaust
  • Sprinkler, standpipe and fire alarm work on commercial and multi-family structures

Typically exempt

  • Replacing a fixture, switch, receptacle or light with no alteration to wiring or piping
  • Clearing a stoppage without replacing or rearranging concealed piping
  • Filter, thermostat and routine component service
  • Like-for-like appliance repair that does not alter the connection

Where a municipality issues separate trade permits, the work is done under whatever electrical or plumbing licence that city, town or county requires; many places license neither trade. Trade licences in New York

Rather not deal with the building department?

Get a free quote →

How to apply for an Irondequoit building permit

1. Confirm the parcel is in the town

The City of Rochester and other Monroe towns are separate authorities.

2. Confirm worker coverage

Workers’ compensation and disability coverage are required.

3. Check the shoreline flood zone

Lake Ontario and bay parcels carry elevation requirements.

4. Assemble stamped plans

Commercial and larger residential work needs an architect or engineer seal.

5. File with the department

Drawings, trade permits and flood submissions as they apply.

6. Book inspections

The department inspects to plan and checks elevation on the shoreline.

Review, corrections and what actually causes delay

In New York, the first cause of delay is uncertainty over jurisdiction — filing with a town when an incorporated village inside it holds the authority, or assuming a county issues permits when it generally does not. After that come Energy Code documentation, a contractor registration that the jurisdiction does not recognise, and, in shoreline and flood-prone areas, floodplain requirements that were not addressed up front. Build the plan-review time into the schedule and confirm the checklist with the Building Department before filing.

Every permit carries an expiration date set by Town of Irondequoit, which may void a permit if work does not start in time; confirm the expiry on phased or delayed work. Permit validity in New York

Inspections in Irondequoit

Where a permit is required, standard checkpoints include footing and foundation, framing, rough-in electrical, plumbing and mechanical, insulation and Energy Code compliance, fire systems on commercial work, and final, with a certificate of occupancy before use. The department inspects to the approved plans and checks elevation certificates on shoreline flood-zone work.

New York inspections are made against the code edition that applied to the permit application, so the approved plans and the Energy Code documentation need to be on site for the inspector to check against. Local code enforcement officials are certified by the state, and the municipality reports its enforcement activity to the Department of State. Confirm the notice the Building Department needs and schedule around its inspection windows.

Want this handled start to finish?

Get a free quote →

Do not cover work before the required inspection has been approved. Keep the issued permit, the approved plans, product listings, Energy Code documentation and your correction responses available on site.

Irondequoit permit search and official resources

Permit records in New York sit with the local authority that issued them. Where the Town of Irondequoit Building Department is the authority for the Town of Irondequoit, it holds the building permit, the inspection history and the certificate of occupancy or compliance. If you are buying, refinancing or renovating, confirm that past work was permitted rather than assuming it was — open permits and missing certificates are a common closing problem in this state.

🔍

Confirm the authority having jurisdiction first. New York enforces one statewide Uniform Code outside New York City, but towns, villages and cities each administer it with their own local law, fee schedule and staffing, so the requirements that apply vary by parcel — and a village inside a town is its own authority. Confirm current requirements, fees and review turnaround for your filing date.

These are the primary sources behind this guide. Codes, fee schedules and procedures change — confirm the position for your filing date.

Frequently asked questions

Who issues building permits in the Town of Irondequoit?

The Building Department at 1280 Titus Avenue. The City of Rochester and neighbouring Monroe County towns run their own building departments.

Inspections are where schedules slip.

Get a free quote →

Why is flood review so central here?

Irondequoit sits on a peninsula between Lake Ontario and Irondequoit Bay, so much of its shoreline is in flood zones and waterfront projects carry elevation requirements under the town’s flood damage prevention law.

Do I need a contractor licence here?

New York has no statewide contractor licence, and upstate Monroe County towns generally do not require a local general-contractor licence. Workers’ compensation and disability coverage are still required.

What kind of work is most common?

As a fully built-out inner-ring suburb, most projects are alterations, additions and infill rather than new subdivisions, so change-of-use and existing-building provisions figure often.

Do I need stamped drawings?

Commercial work and larger residential work require drawings stamped by a New York-licensed architect or professional engineer.

Which code edition applies?

The 2025 Uniform Code, administered by the town with local flood provisions adopted by local law.

Simplify Irondequoit permitting with Alliance Permitting

Irondequoit rewards confirming the worker-coverage requirements and any Lake Ontario or bay flood elevation before filing on this built-out peninsula.

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Trusted by leading builders, developers, and national contractors — 21+ years of filing in the jurisdictions we write about.

Contractors and builders choose Alliance for Irondequoit because the work is done by people who have stood at the counter:

  • We confirm the worker-coverage requirements the department needs.
  • We check Lake Ontario and Irondequoit Bay flood elevation.
  • We handle change-of-use and existing-building provisions on infill.
  • We assemble the stamped plan set the department requires.
  • We coordinate the electrical, plumbing and mechanical filings.

Alliance Permitting is a permit documentation and submission company in New York. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Irondequoit sooner?

Let Alliance prepare, file, and track your Irondequoit permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Irondequoit permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.