Skip to main content
Municipal GuideIllinoisWorth · Cook County

Worth, Illinois Building Permit Guide

To get a building permit in Worth, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

Worth’s Building Department at Village Hall, 7112 W. 111th Street, permits and inspects construction in the village, from fences and sheds to roofs and new homes, and every contractor must register with the village first.

Authority: Worth Building DepartmentFiling: Paper forms at Village HallPhone: 708-923-7507
Authority
Building Department7112 W. 111th Street
Fence, shed or garage
1.5% of costPlus $50 per inspection
Contractor registration
$110 a year$10,000 bond
Inspections
708-923-750724 to 48 hours’ notice

In the Village of Worth, building permits are issued by the Building Department at Village Hall, 7112 W. 111th Street (708-923-7507), headed by Building Commissioner Bruce Zartler. Permits are needed for fences, pools, sheds, driveways, siding, gutters, roofs, windows and other remodeling. Fence, shed and garage permits cost 1.5% of the project cost plus $50 for each inspection, and contractors register each year for $110 with a $10,000 bond.

What requires a building permit in Worth?

Worth’s Building Department says you or a company cannot start a job without a permit, and that a qualified inspector gives the final approval when the work is done. Its pages name fences, pools, sheds, driveways, siding, gutters, roof and window replacement and other remodeling, and its forms add electrical, plumbing, signs, decks, porches, gazebos, garages, storage pods, demolition and new construction. Replacements need permits too: the fence, garage and deck sheets each say so.

Permit needed

  • New homes, additions, remodels and demolition
  • Garages, sheds, decks, open porches, patios and gazebos
  • Fences, new or replacement
  • Driveways, sidewalks and culverts
  • Roofs, siding, gutters and windows
  • Electrical and plumbing work
  • Above-ground and in-ground pools, signs and storage pods

Zoning limits to plan around

  • One shed per lot, rear yard only, 160 sq ft and 12 ft high at most
  • Detached garages 768 sq ft (R-1) or 720 sq ft (R-2) at most, 16 ft overall
  • Privacy fences 6 ft, chain link 5 ft, never past the front building line
  • Decks 5 ft from lot lines; open porches 5 ft into the front yard at most
  • Accessory structures 15 ft high at most

Sheds may have no gas, heat, sewer or water service and no flat roof. A detached garage sits at least 10 feet behind the house and 5 feet from the side and rear lot lines, with no part over an easement, and its walls may be no longer than 34 feet.

What Worth decides and what the state holds

Worth sets its own building, zoning and fee rules in its Village Code Book, registers contractors and requires a business license for any business in the village. The building department’s pages and forms do not name the code editions it enforces; those are in the Village Code. Plumbers file their state licenses, roofers their Illinois roofing license and electricians their electrical contractor’s license when they register.

Worth building department: who handles permitting

The Building Department reviews applications, issues permits and sends inspectors to check the work; finished permits are paid for and picked up at the Village Clerk’s office. Public Works reviews driveway culverts and the engineering for demolition and new construction, the Water Department handles water readings and service, and the Real Estate Development Board hears zoning requests. Land in unincorporated Cook County is permitted by the county’s Department of Building and Zoning instead.

Short on time to read all of this?

Get a free quote →
Worth permit contacts
DetailInformation
OfficeBuilding Department, Village Hall, 7112 W. 111th Street, Worth, IL 60482
Phone708-923-7507; Village Hall 708-448-1181; fax 708-448-1193
HoursMonday to Friday, 9 a.m. to 5 p.m.
Public Works708-448-4256 (culverts, demolition and new construction engineering)
Building CommissionerBruce Zartler

Worth permit types

Worth uses paper applications revised in March 2025: a general building permit application (residential or commercial, with the property index number, project cost and every contractor), separate electrical and plumbing applications that list each outlet, circuit and fixture, and short forms for fences, sheds, pools, signs and storage pods. Every permit application starts with the owner, who stays responsible even when a contractor applies on the owner’s behalf.

Residential permits

  • Fences, sheds, garages and decks: the application and a plat of survey with the structure drawn in its exact location and its distance to the lot lines; the plat is kept by the village. Decks also need drawings of pier locations, railing height and spacing, and a materials list.
  • Garages: 4-inch concrete floors on 4 inches of stone, a separate electrical circuit with at least one light, switch and receptacle, and an underground feeder in galvanized conduit; attached garages need one-hour fire separation from the house.
  • Driveways: a plat with the location and size; no overlays, 25 feet wide at most at the street and 5 feet from side lot lines, with 6 inches of concrete in the right-of-way and 4 inches on private property.
  • Pools: new and replacement pools need a permit and a plat showing the pool and the power lines. Pools go in the rear yard only: above-ground pools 5 feet from lot lines and buildings, in-ground pools and their decking and equipment 6 feet from lot lines. The pool wall must be 5 feet from underground and 10 feet from overhead electric lines, the required fence must be up before the pool is filled, and excavated dirt must leave the property without changing the grade.

Commercial permits

Commercial work uses the same building permit application, marked commercial, with its own electrical and plumbing forms. Commercial properties need their MWRD and IDOT permits before the village issues its permits, and commercial deck railings must be at least 42 inches high. New businesses also need a village business license.

Not sure this scope needs a permit?

Get a free quote →

What comes before the building permit

  • Zoning approval. Variations, appeals, amendments, special uses and planned developments go to the Real Estate Development Board and Village Board. Call Village Hall first to see whether a pre-application meeting is needed, then file 10 copies of the plat, site plan and legal description with the fee and a $2,500 consulting fee deposit.
  • Demolition and new homes. Meet Public Works and the Building Commissioner first; submit a stormwater pollution prevention plan, site, grading and demolition plans meeting the Watershed Management Ordinance; get the Cook County demolition permit before the village’s; and have Public Works supervise a water well search.
  • Culverts. Public Works decides whether a new driveway needs a culvert and sets its elevation on 72 hours’ notice.

Worth permit costs and fees

Worth’s FAQ says permit fees are set in the Village Code Book. The village’s requirement sheets print the fees for the most common residential jobs; payment is due when the permit is picked up at the Clerk’s office:

Worth permit fees printed on the village’s requirement sheets
PermitFee
Fence1.5% of project cost, $25 minimum; refundable cash bond of 3 times the permit fee
Shed1.5% of cost; $40 more with electric; refundable deposit
Garage1.5% of project cost, $25 minimum; bond of 3 times the fee, $50 minimum; electric $40
Deck$0.10 per sq ft, $50 minimum; bond $0.10 per sq ft, $50 minimum
Open porch or patio$0.10 per sq ft, $30 minimum, with a matching bond
Above-ground or in-ground pool1.5% of project cost; electric $40; refundable bond of 3 times the fee, returned 3 to 5 weeks after the final
Inspections$50 per inspection
Variation / appeal / text amendment$200 each
Map amendment / special use$250 each
Fence / garage variation$10 / $15
Zoning certificate$10 single-family; $25 all others

Two examples from the sheets: a $4,000 fence costs 1.5%, or $60, plus $100 for the post hole and final inspections, with a $180 refundable bond. A 300-square-foot deck works out to $30 at $0.10 a foot, so the $50 minimum applies, plus $50 for each inspection and a $50 bond. Fees for additions, remodels and new homes are not printed on the forms; the FAQ points to the Village Code Book for them, and the Building Department can give the figure for a specific job. On new construction, all engineering fees must be paid before an occupancy permit is issued, and bonds are refunded by mail about two weeks after the final inspection.

Rather talk it over?

Call 1-855-478-4290 →

Trade permits and who may pull them

All contractors working in Worth must be licensed, or registered, with the village before starting work, and permits are not issued unless every contractor on them is licensed and bonded. Registration runs from January 1 to December 31 and is filed in person or by mail with payment.

  • General contractors: $110 ($55 from July 1), a current certificate of liability insurance naming the village as certificate holder, and a $10,000 surety bond.
  • Electrical contractors: the same fee, insurance and bond plus a copy of a valid electrical contractor’s license; the electrical permit is signed by the supervising electrician.
  • Plumbers: the state 055 plumbing contractor license and 058 plumbing license, a registration form and a letter of intent on company letterhead with each plumbing permit.
  • Roofers: $110, insurance, a $10,000 surety or performance bond and an Illinois roofing contractor license.
  • Sign contractors: a $25,000 bond.

The building permit application can be signed by the homeowner or the contractor, and the requirement sheets let owners write “Homeowner” where no licensed contractor is used. The Building Commissioner advises owners to ask whether a company is bonded, licensed and insured, and the village will confirm whether a contractor is registered. Landscapers and tree companies must haul away their own yard waste.

How to apply for a Worth building permit

1. Get the forms

Download the application and the requirement sheet for your job from the village’s permitting page or pick them up at Village Hall.

2. Mark up a plat of survey

Draw the fence, shed, garage, deck or driveway in its exact location with dimensions and distances to lot lines.

3. Register contractors

Each contractor files the registration form with insurance, bond, licenses and fee.

4. File at Village Hall

Turn in the signed application and plat to the Building Department at 7112 W. 111th Street.

5. Wait for the call

The department phones the owner when the permit is ready.

6. Pay and pick up

Pay the fee and any bond at the Village Clerk’s office and collect the permit.

Rather not deal with the building department?

Get a free quote →

Review, corrections and what causes delay

The village FAQ says most permits are approved in 1 to 2 days, longer for larger projects, while the fence, shed, garage and deck sheets allow about 3 to 5 business days. Common delays are unregistered or unbonded contractors, plats without the structure drawn on them, and, for new homes, unfinished engineering review or a missing Cook County demolition permit. A permit is valid for one year from issue.

Inspections and certificates in Worth

Call the Building Department at 708-923-7507 (or Village Hall at 708-448-1181) 24 to 48 hours before you need an inspection; driveway inspections need 24 hours’ notice. Each inspection costs $50. Required stages from the village’s sheets:

  • Fences: a post hole inspection for the 36-inch depth, with posts set in concrete, and a final.
  • Sheds: a rough inspection of the anchoring and a final.
  • Garages: a pre-pour inspection after framing and before concrete, an underground electrical inspection before the trench is backfilled, and finals.
  • Decks and porches: a post hole inspection for 42-inch piers on attached decks, and a final.
  • Driveways: two inspections for concrete or asphalt.

On new construction, an occupancy permit is issued only after every final inspection passes, engineering fees are paid and both the Building Commissioner and the Superintendent of Public Works sign off. Builders must keep a silt fence up until landscaping stabilizes the site, maintain a portable toilet, and work only between 7 a.m. and 7 p.m. Monday to Saturday and 8 a.m. and 7 p.m. on Sundays. The village does no pre-sale building inspection, but the Water Department takes a final water reading (708-923-7501).

Illinois building code in Worth

Worth enforces the building and zoning rules in its Village Code Book through the Building Department, together with the Watershed Management Ordinance for new construction. FEMA’s Community Status Book lists the Village of Worth (community 170177) as participating in the National Flood Insurance Program, with its current flood map dated November 1, 2019; the village has no Community Rating System class.

Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline

Worth permit search and official resources

Permit records are requested under the Freedom of Information Act on the village’s request form, returned to Village Hall at 7112 W. 111th Street, by fax to 708-448-1193 or by email to the department addresses printed on the form. The village responds within five working days, and certified copies cost $1.

Want this handled start to finish?

Get a free quote →

Inspections are where schedules slip.

Get a free quote →

Worth building permit FAQs

How much is a fence permit in Worth?

1.5% of the project cost with a $25 minimum, plus $50 for each inspection and a refundable cash bond of three times the permit fee.

Do I need a permit to replace my roof or windows?

Yes. Worth requires permits for roof and window replacement, siding, gutters, fences, sheds, pools and driveways.

How big can a shed be?

One shed per lot, in the rear yard, up to 160 square feet and 12 feet high, 10 feet from other buildings and 3 feet from lot lines.

How do contractors register?

In person or by mail, with a $110 fee ($55 after July 1), insurance naming the village and a $10,000 bond; registration expires December 31.

How long does a permit take?

Usually 1 to 2 days for simple jobs and longer for large projects; the handouts allow 3 to 5 business days. The department calls when it is ready.

Does Worth inspect a house before it is sold?

No. There is no pre-sale building inspection, but the Water Department must take a final water reading.

Who approves a zoning variation?

The Real Estate Development Board and Village Board; a variation costs $200, a fence variation $10 and a garage variation $15.

Simplify Worth permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Worth sooner?

Let Alliance prepare, file, and track your Worth permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Worth permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.