Skip to main content
Municipal GuideIllinoisKankakee · Kankakee County

Kankakee, Illinois Building Permit Guide

To get a building permit in Kankakee, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

Inside the City of Kankakee, building permits come from the city’s Building & Code Enforcement Department at 295 N. Harrison Avenue, not from Kankakee County, and the city accepts only original forms.

Authority: Building & Code Enforcement DepartmentFees: Municipal Code Chapter 8, Article XIIPhone: 815-936-7390
Office
Building & Code Enforcement295 N. Harrison Ave.; 8 a.m.–4 p.m.
House permits
$35 + 1% of valueCapped at $5,000
Contractors
City registration$150 a year, $10,000 bond
Zoning
Planning & Zoning Dept.275 E. Court St., 815-936-7320

The City of Kankakee runs its own Building & Code Enforcement Department at 295 N. Harrison Avenue (815-936-7390, Monday to Friday 8 a.m. to 4 p.m.), headed by Director of Code Enforcement Tomora Nelson. It issues building, electrical, plumbing and mechanical permits inside city limits under Chapter 8 of the Municipal Code; Kankakee County’s Planning Department covers only unincorporated land. A permit for a one- or two-family home costs a $35 minimum plus 1% of the value of the work, and contractors must hold a city registration.

What requires a building permit in Kankakee?

Kankakee’s permit list is broad. Besides new buildings, additions, remodeling and demolition, the city requires permits for exterior doors, skylights and windows (new and replacement), decks, porches, stairs and ramps, new and replacement fences, roofs, gutters, siding, fascia and soffit, asphalt drives, parking lots and all flatwork such as sidewalks, driveways, patios and parking pads, interior demolition, lead mitigation, fire sprinklers and alarms, generators and solar panels, plumbing, gas lines, irrigation and water heaters, furnaces, air conditioning and boilers, elevators and commercial kitchen equipment, sewer work, sump pumps, drain tile, waterproofing and signs. Sheds, garages, carports, gazebos, chicken coops and pools over 24 inches deep count as structures that need a permit.

Permit needed

  • Roofs, gutters, siding, fascia and soffit
  • Windows, exterior doors and skylights
  • Fences, decks, porches and ramps
  • Driveways, sidewalks, patios and other flatwork
  • Water heaters, furnaces and A/C
  • Sump pumps, drain tile and waterproofing

Not allowed

  • Pole barns
  • Railroad cars and shipping containers
  • Permanent storage pods
  • Accessory structures on vacant lots
  • Wells or septic tanks

When equipment must be replaced or repaired in an emergency, the permit application is due by the next working business day.

What Kankakee decides and what the state holds

The city adopts its codes in Chapter 8 of its Municipal Code. The version posted on the city’s site adopts the 2018 International Building and Residential codes, the International Mechanical, Fuel Gas and Property Maintenance codes, the Illinois Plumbing Code, the 2017 National Electrical Code and the Illinois Accessibility Code, with local changes. It deletes several items from the model codes’ lists of work exempt from permit, requires copper electrical conductors, bars pole barns, prefabricated steel buildings and shipping containers as a main building, and requires the street-facing wall of most new non-residential buildings to be faced at least 3 feet up with brick, stone, concrete or similar material rather than vinyl, metal or fiber cement siding.

Short on time to read all of this?

Get a free quote →

Kankakee building department: who handles permitting

Two city departments share the work. Building & Code Enforcement issues building permits, registers contractors and runs inspections, rental licensing and property maintenance enforcement. The Planning & Zoning Department, led by Director of Planning & Zoning Melissa W. King, enforces the zoning code, reviews development and permits for zoning, and takes floodplain, site plan, subdivision, temporary use and zoning change applications. Commercial and industrial plans also need the City Engineer’s approval before a permit can issue. Kankakee County’s Planning Department, at 189 E. Court Street, handles only unincorporated parts of the county.

City of Kankakee permit contacts
DetailInformation
Building & Code Enforcement295 N. Harrison Ave., Kankakee, IL 60901; 815-936-7390; Monday to Friday, 8:00 a.m. to 4:00 p.m.
Department headTomora Nelson, Director of Code Enforcement
Electrical inspection scheduling815-937-2940 ext. 2, as listed by the city
Planning & Zoning Department275 E. Court St., Suite 201; 815-936-7320; Monday to Friday, 8:00 a.m. to 4:00 p.m.
City Hall main line815-933-0502

Kankakee permit types

The Building & Code page offers a Building Permit Application, a Contractor Application and an Excavation in City Right-of-Way form, among others; the department states that only original forms are accepted. Fire alarm and sprinkler permits use the Fire Department’s own application.

Residential permits

  • Surveys. Work that affects property lines or how much of the lot is built on needs a plat of survey by a registered land surveyor; a survey more than six months old must come with the owner’s signed affidavit that it is still accurate.
  • New houses. A grading survey at application showing lot corner elevations, the footprint, the proposed top of foundation, swales, utilities and finished grade; a surveyor’s certification of the top of foundation (within six inches of plan) before work continues past backfill; and a final grade survey and Final Grading Certification before occupancy.
  • Fences. A fence is any barrier over 3 feet tall. The Office of the City Planner’s info sheet allows fences only in side, rear and corner side yards, never past the front line of the house and not within 5 feet of a rear lot line on an alley. The usual limit is 6½ feet, or 8½ feet beside a railroad or interstate. Fences count as floodplain development: one in the floodway needs both a state and a city floodplain permit, and one in the flood fringe a city floodplain permit.
  • Rental and vacant buildings. Rented dwellings need a city rental operating license, with an initial inspection ($70 for a single-family rental) and inspections every two years after that. An owner of a vacant building registers it with the city for $100 a year and files a vacant building plan.

Not sure this scope needs a permit?

Get a free quote →

Commercial permits

Commercial and industrial development plans must be reviewed and approved by the City Engineer before a building permit is issued, and a new subdivision phase needs an all-weather road before any permits there. Non-residential permits are charged at a higher rate than homes (see the fee table), and new buildings in most occupancy groups must meet the city’s front-wall masonry rule.

What comes before the building permit

  • Zoning check. The Plan/Building Application Review Form shows the three common reasons an application is returned: it is incomplete, it does not meet zoning, or the work needs a licensed contractor registered with the city. A Zoning Verification Request Form is available from Planning & Zoning.
  • Zoning relief. Variances, conditional use permits and rezonings are filed with Planning & Zoning on one application and heard by the seven-member Planning Board. Newspaper, sign and mailed notices must go out no earlier than 20 and no later than 10 days before the hearing, or the case moves to the next meeting, typically a month later. The city posts the board’s 2026 meeting schedule and the Zoning Ordinance as revised in November 2025.
  • Floodplain and stormwater. Development in a mapped flood area needs a floodplain permit showing existing and proposed grades and the lowest floor elevation, with plan review fees invoiced. The city posts its Stormwater Ordinance, first adopted in 2000, as amended by Ordinance 2026-54 in July 2026. It requires a Class 1 site development permit, valid for one year, for land disturbance over 5,000 square feet, for houses or duplexes built without an approved neighborhood drainage plan, and for non-residential projects that need a coverage variance while adding 500 to 10,000 square feet of hard surface; more than 10,000 square feet of new hard surface or more than one acre of disturbance needs a Class 2 permit. A house or duplex in a subdivision with an approved drainage plan is exempt.
  • Right of way. Digging in a city right of way needs an excavation permit.

Kankakee permit costs and fees

Permit fees sit in Article XII, the Fee and Fine Schedule, of Chapter 8 (Ordinance 2020-14, January 21, 2020). Each building fee is a minimum plus a charge on the valuation of the work, and Chapter 8 also points plumbing, electrical, mechanical and gas permit fees to this article.

Rather talk it over?

Call 1-855-478-4290 →
City of Kankakee building permit fees, Chapter 8, Article XII
WorkFee
One- and two-family dwellings$35 minimum plus $10 per $1,000 (1%) of valuation; maximum $5,000
Residential demolition$50
Other buildings (commercial, industrial, institutional)$100 minimum plus $15 per $1,000 (1.5%) of valuation
Commercial demolition$150
Non-profits and Enterprise Zone exemption filers50% of the permit fee
Signs$50 per sign face plus 50 cents per sq ft
Re-inspection or extra inspection$50
Work started before the permitDouble the permit fee
Contractor registration$150 a year
Variance (zoning)$100 minor or $200 major residential; $500 commercial or industrial
Conditional use permit$200 (R1) or $400 (R2/R3); commercial or industrial $300 (1 acre or less) or $600 (over 1 acre)

Worked example from the residential rule: a $12,000 roof replacement on a house costs $35 plus 12 × $10, or $155. A permit holder who leaves debris on the site at the end of a workday can be fined $100 to $750 and stopped, and applicants for a commercial or industrial planned unit development, conditional use or map amendment also reimburse the city’s engineering, planning and legal costs within 30 days of an invoice.

Trade permits and who may pull them

Plumbing permits follow the Illinois Plumbing Code as the city adopted it. No permit is needed to clear a stoppage, fix a leak in pipes, valves or fixtures, or remove and reset a toilet, so long as no valves, pipes or fixtures are replaced or rearranged; replacing a defective concealed trap, drain, waste or vent pipe is new work that needs a permit and inspection.

Kankakee licenses electrical contractors itself. A contractor either passes the city’s written or oral examination before its Electrical Inspector ($50 a year) or, if already licensed by examination in another Illinois municipality, registers with the city ($100 a year); licenses expire on April 30. Commercial and industrial wiring must be done by a Class-A licensed electrical contractor. The owner of a one- or two-family home who lives there, or intends to, may install wiring with a permit, but not the meter cabinet, distribution breakers or fuse panels.

  • Contractor registration: anyone doing work that needs a building permit registers with Building & Code Enforcement for $150 a year, posts a $10,000 bond and carries $1,000,000 general liability, $100,000 workers’ compensation and $50,000 property damage cover naming the city.
  • Licensed trades: a contractor shows a valid State of Illinois license, or local, county or state registration, for the work it does; plumbers and roofers need their state licenses.
  • Owners and landlords: an owner doing all of the work on a project need not register if every subcontractor is registered and the owner signs an affidavit, and a landlord working on his own property is not treated as a contractor.

Rather not deal with the building department?

Get a free quote →

How to apply for a Kankakee building permit

1. Confirm it is city land

Unincorporated parcels go to the county Planning Department instead.

2. Check zoning

Ask Planning & Zoning, or file a zoning verification request, before you design.

3. Register the contractor

Contractor registration, bond and insurance must be in place.

4. Prepare surveys and plans

Plat of survey and, for new homes, the grading survey.

5. File original forms

Submit the Building Permit Application to Building & Code Enforcement, 295 N. Harrison Avenue.

6. Pay the fee

The fee follows Article XII of Chapter 8, doubled if work started first.

Review, corrections and what causes delay

Reviewers use a Plan/Building Application Review Form to list what is wrong: missing or incomplete documents, a zoning conflict or an unregistered contractor, plus any other deficiencies. Commercial and industrial jobs wait on the City Engineer’s approval. A decision by city staff can be appealed in writing to the Code Official within 10 days of its mailing date.

Inspections and certificates in Kankakee

For building permit and inspection questions call Building & Code Enforcement at 815-936-7390; the city lists 815-937-2940 extension 2 for scheduling electrical inspections. A re-inspection, or any extra inspection needed or requested, costs $50. On a new house, the top-of-foundation certification is due after the foundation, drain tile, damp-proofing and backfill and before further work, a final plat of survey is due within four months of a temporary occupancy certificate, and an occupancy permit follows only after the final grade survey and Final Grading Certification.

Code tickets issued by city staff are heard by the city’s Adjudication Court, whose decisions can be reviewed in the Kankakee County Circuit Court.

Illinois building code in Kankakee

Kankakee enforces the codes adopted in Chapter 8 of its Municipal Code, and its floodplain ordinance governs building in mapped flood areas. FEMA’s Community Status Book lists the City of Kankakee (community 170339) as participating in the National Flood Insurance Program, with flood maps dated January 20, 2010; the city is not in the Community Rating System.

Want this handled start to finish?

Get a free quote →

Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline

Kankakee building permit FAQs

Does Kankakee County issue permits in the city?

No. The City of Kankakee’s Building & Code Enforcement Department issues them; the county permits only unincorporated land.

Do I need a permit to replace windows or a roof?

Yes. New and replacement windows, roofs, gutters, siding, fascia and soffit all need a permit.

How much does a house permit cost?

A $35 minimum plus $10 per $1,000 of valuation, up to $5,000; a $12,000 roof is $155.

Can I put a shipping container on my lot?

No. Shipping containers, railroad cars, pole barns, permanent storage pods and accessory buildings on vacant lots are prohibited.

Can a homeowner do electrical work?

Yes, in a one- or two-family home the owner lives in or will live in, with a permit, except the meter cabinet, breakers and fuse panels.

Do contractors register with the city?

Yes. Registration is $150 a year with a $10,000 bond and insurance; electricians also need a city license or registration.

Where can a fence go?

Only in side, rear and corner side yards, and every new or replacement fence needs a permit.

Kankakee permit search and official resources

For a permit’s status or history, call Building & Code Enforcement. Copies of permit records can be requested under the Illinois Freedom of Information Act through the city’s online FOIA form, a downloadable form or FOIA@citykankakee-il.gov.

Inspections are where schedules slip.

Get a free quote →

Simplify Kankakee permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Kankakee sooner?

Let Alliance prepare, file, and track your Kankakee permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Kankakee permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.