Skip to main content
Municipal GuideIllinoisCharleston · Coles County

Charleston, Illinois Building Permit Guide

To get a building permit in Charleston, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

Charleston’s Building and Development Services department at City Hall, 520 Jackson Avenue, issues one building and zoning use permit for work inside the city and handles zoning up to 1½ miles beyond the limits.

Authority: Charleston Building & Development ServicesFiling: Signed paper form by fax or emailPhone: (217) 345-5650
Authority
Building & Development Services520 Jackson Ave, Charleston
Inspections
24 hours’ notice(217) 345-5650 or fax (217) 345-7554
Electricians
City license requiredHomeowners on their own house exempt
Zoning reach
1½ milesBeyond the city limits

In Charleston, construction permits come from the city’s Building and Development Services department at City Hall, 520 Jackson Avenue, led by Community Development Director Abby Youngblood ((217) 345-5650). Work inside the corporate limits needs a combined building and zoning use permit, filed on a signed paper application by fax or email, and the city’s zoning reaches 1½ miles past its limits. Charleston enforces the 2021 International Codes and the 2020 National Electrical Code and licenses electricians.

What requires a building permit in Charleston?

The city’s rule is broad: construction needs a permit, and the permit also covers electrical and plumbing work. The building page then lists the work that does not need one.

Permit needed

  • New houses, commercial buildings and additions
  • Garages, sheds and other accessory buildings
  • Alterations and repairs that touch structural elements or change the means of egress
  • Electrical and plumbing work
  • Fences over 6 feet high
  • Pools, other than prefabricated pools under 24 inches deep
  • Water and sewer taps to city mains
  • Driveways, parking lots and site grading tied to a project

No permit

  • Painting, wallpaper, tile, carpet, cabinets, countertops and similar finishes
  • Fences 6 feet high or less
  • Prefabricated pools under 24 inches deep
  • Swing sets and play equipment at a single-family home
  • Routine repairs and maintenance that leave structure and exits alone

Inside the corporate limits, every project that needs a building permit also needs a zoning use permit, and the two are applied for on one form. The Planning and Zoning division adds sign permits, conditional use permits and site plan review for residential and commercial sites.

What Charleston decides and what the state holds

Charleston picks its own codes, writes its Unified Development Code, licenses electricians and sets the zoning rules for the city and the 1½-mile ring around it, which Coles County also recognizes on its zoning page. The state’s pieces are the Illinois Plumbing Code and Accessibility Code, which the city lists among its codes, state licenses for plumbers and roofers, and the state rule that buildings other than detached single- and two-family homes be designed and sealed by an Illinois-licensed architect, structural engineer or professional engineer. The city notes that the seal rule is enforced by the state’s professional regulation department.

Short on time to read all of this?

Get a free quote →

Charleston building department: who handles permitting

Building and Development Services administers the building, property maintenance and life safety codes and issues all development permits in the city. The building section permits and inspects construction and issues water and sewer tapping permits; the Planning and Zoning division handles zoning use permits, rezoning and variance requests, site plans and sign permits. The department has its own electrical and plumbing inspectors alongside the Building Code Official. Planning staff also comment on subdivision plans, planned unit developments, landscape plans, annexations and requests to abandon rights-of-way or easements, and they draft changes to the land development regulations to carry out the Comprehensive Plan, last updated in 2020.

Charleston permit contacts
DetailInformation
OfficeBuilding and Development Services, City Hall, 520 Jackson Avenue, Charleston, IL 61920
Department headAbby Youngblood, Community Development Director, (217) 345-5650
Building Code OfficialApplications and inspection requests to codeofficial@co.coles.il.us
Inspections(217) 345-5650; fax (217) 345-7554
City Planner (zoning questions)(217) 345-8452
City Hall(217) 345-2484; Monday to Friday, 8 a.m. to 5 p.m.

Outside the city but within 1½ miles of its limits, Charleston’s zoning still applies; beyond that ring, Coles County has no zoning and issues no building permits. Septic systems on unsewered lots are permitted by the Coles County Health Department, not the city; its plan review fee for a single-family home without a surface discharge is $200, and an application must be filed at least 7 days before work starts.

Charleston permit types

Charleston uses one building and zoning use permit form for most projects. The city will not accept a digital signature: print the form on 8½ by 14 inch legal paper, sign it, and fax it to (217) 345-7554 or email it to the Building Code Official, or return it to City Hall.

Residential permits

  • Zoning use permit items. The completed form, the legal description from the property record card or deed, the property tax identification number, plot or site plans drawn to scale (the planning page asks for three) and a floor plan where it applies.
  • Building permit items. Plans for the building and a site plan, prepared to the city’s checklists for each building type, which are kept in the lobby information area of the Mayor’s Office.
  • Flood zones. A property in a flood zone needs a sealed survey showing the mean high water mark and the 100-year flood line.
  • Utility taps. New water and sewer connections need a tapping permit before connecting to city mains.

Not sure this scope needs a permit?

Get a free quote →

Commercial permits

Commercial projects follow the 2021 International Building Code and need plans sealed by an Illinois-licensed design professional. They also go through site plan review covering parking, landscaping and signage under the Unified Development Code, and the city inspects grading, landscaping, parking lots and striping, utility lines and off-site work as part of the job. Planned unit developments, major subdivisions and conditional uses go to the Board of Zoning Appeals and Planning.

What comes before the building permit

  • Pre-application meeting. For anything that needs board or council approval, call Community Development at (217) 345-5650 first; staff decide whether a concept or pre-application meeting is required.
  • Board of Zoning Appeals and Planning (BZAP). Variances, conditional use permits, zoning map and text amendments, planned unit developments, major subdivisions and appeals of a Code Official’s decision start with the BZAP application packet, which asks for a letter of intent, plans and the legal description in Word format.
  • City Council. Rezonings and text amendments take effect only after review by BZAP and the City Council.
  • Septic outside the sewer area. In the 1½-mile ring, an unsewered lot needs a Coles County Health Department septic permit.

Charleston permit costs and fees

The city’s building, planning and how-to pages do not print a permit fee table or a fee ordinance number. Ask Building and Development Services at (217) 345-5650 for the amount for your project before you file; the city’s online payments page has a separate “Building Permit Fee” option for paying it.

How Charleston permit charges are handled
ItemWhat the city says
Building and zoning use permitAmount not printed on the permit pages; quoted by the department
Paying a building permit feeOnline through the city’s “Building Permit Fee” payment link
BZAP applications (variance, conditional use, rezoning, PUD, subdivision, appeal)Required fees must come with the application; it is not processed until everything is in
Water and sewer tapping permitIssued by the building section before connection to city mains
Re-inspection after a second failureViolation Notice; the next inspection is three business days after the request

Rather talk it over?

Call 1-855-478-4290 →

Ordinances are added to the online City Code, codified by American Legal, each quarter, but newly approved ordinances are posted in a pending codification folder within 24 to 48 hours of a City Council vote, so check there for recent changes.

Trade permits and who may pull them

Electrical and plumbing work is covered by the city building permit and inspected by the department’s own electrical and plumbing inspectors.

  • Electrical: Charleston requires every electrician to hold a license, except a single-family homeowner working on their own residence. Work follows the 2020 National Electrical Code.
  • Plumbing: work follows the Illinois State Plumbing Code, and the state requires plumbers to be licensed.
  • Roofing: roofers must hold a state license.
  • Mechanical and fuel gas: heating and air conditioning work follows the 2021 International Mechanical and Fuel Gas Codes and gets a final HVAC inspection.
  • Design professionals: plans for any building other than a detached single- or two-family home must be sealed by an Illinois-licensed architect, structural engineer or professional engineer.

How to apply for a Charleston building permit

1. Confirm the location

Check that the property is inside the city or within 1½ miles of it, and look up its zoning on the official zoning map.

2. Talk to staff about bigger projects

For variances, rezonings or new developments, call Community Development about a concept or pre-application meeting and file with BZAP first.

3. Gather the zoning items

Legal description, tax ID number, scaled site plans and a floor plan, plus a sealed survey if the lot is in a flood zone.

4. Prepare building plans

Use the city’s checklist for your building type; commercial plans need a design professional’s seal.

5. Sign and send the form

Print on legal paper, sign in ink, and fax or email it, or return it to City Hall.

6. Pay and start inspections

Pay the fee the department sets, then book each required inspection with 24 hours’ notice.

Rather not deal with the building department?

Get a free quote →

Review, corrections and what causes delay

A digitally signed form is refused, and missing zoning items (legal description, tax ID or scaled plans) hold up the zoning use permit that every building permit depends on. Board cases take longer: a BZAP application is not accepted until it is complete, then a project manager routes it to city departments, sends back technical comments that may require revised plans, and only then schedules the hearing. If the applicant does not own the property, the packet needs a letter from the owner authorizing the filing; land held in a trust must name the beneficiaries, and a representative who will appear for the applicant is listed on the form. BZAP meets in the City Council Chambers on the second floor of City Hall at 7 p.m. on its scheduled Thursdays.

⚠️ Data centers and battery storage. The city has petitioned to amend Title 10 of the City Code with a temporary moratorium on data centers, battery energy storage systems and related uses, and BZAP’s public hearing on it was set for September 24, 2026. The posted draft ordinance leaves the adoption date blank; ask the department whether the City Council has adopted it before planning such a project.

Inspections and certificates of occupancy

Request an inspection by calling (217) 345-5650, emailing codeofficial@co.coles.il.us or faxing (217) 345-7554, and allow 24 hours. Give the permit number, the address or subdivision block and lot, your name and the inspection type, and call only when the work is ready. If an inspection fails, do not ask for a re-inspection until the problems are fixed; a second failure for the same item brings a Violation Notice, and the next inspection is then set three business days after your request.

Required inspections for new buildings, additions, renovations and alterations are: footing (bottom of trench, before concrete); foundation (before backfill); slab (before concrete); electrical rough; plumbing rough; framing, after the electrical and plumbing roughs pass and before insulation; insulation, before gypsum board; and the final building, electrical, HVAC and plumbing inspections. The city also inspects site grading and landscaping, on-site and off-site utility work, water and sewer lines and taps, and driveways and parking lots including striping. All new construction must pass these inspections before the Building Department issues a certificate of occupancy.

Illinois building code in Charleston

Charleston lists the codes it enforces as the 2021 International Building, Residential, Fire, Existing Building, Property Maintenance, Mechanical and Fuel Gas Codes, the 2020 National Electrical Code, the Illinois State Plumbing Code, the Illinois Accessibility Code and the City of Charleston Unified Development Code. FEMA’s Community Status Book lists Charleston (community 170052) as participating in the National Flood Insurance Program, with flood maps effective July 18, 2011. The same department enforces the property maintenance code on existing buildings through its property maintenance and code enforcement section.

Want this handled start to finish?

Get a free quote →

Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline

Charleston permit search and official resources

To see an existing permit, inspection record or plan, file the City of Charleston Freedom of Information Act request form by mail or in person at 520 Jackson Avenue, by fax to 217-345-7554 or by email to charlestonilfoia@co.coles.il.us. BZAP agendas, public hearing notices and application packets are posted in the city’s document center, and City Council agendas and minutes are kept in the city’s Agenda Quick repository.

Inspections are where schedules slip.

Get a free quote →

Charleston building permit FAQs

Do I need a permit for a fence in Charleston?

Not for a fence 6 feet high or less; a taller fence needs a building permit.

Can I sign the permit application electronically?

No. Print it on 8½ by 14 inch paper, sign it in ink, then fax it to (217) 345-7554, email it to the Building Code Official or bring it to City Hall.

Can a homeowner do their own electrical work?

Yes, a single-family homeowner working on their own residence is exempt from the city’s electrician license; everyone else must be licensed.

How do I schedule an inspection?

Call (217) 345-5650, email the Building Code Official or fax (217) 345-7554 at least 24 hours ahead with the permit number, address, name and inspection type.

Does Charleston’s zoning apply outside the city?

Yes, within 1½ miles of the city limits.

Which codes does Charleston use?

The 2021 International Codes, the 2020 National Electrical Code, the Illinois State Plumbing Code and Accessibility Code, and the city’s Unified Development Code.

Who decides variances and rezonings?

The Board of Zoning Appeals and Planning holds the hearing; zoning map and text changes then need City Council approval before they take effect.

Do I need a permit for a small above-ground pool?

Not if it is a prefabricated pool less than 24 inches deep.

Simplify Charleston permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Charleston sooner?

Let Alliance prepare, file, and track your Charleston permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Charleston permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.