Skip to main content
County GuideOhioAshland County

Ashland County, Ohio Building Permit Guide

To get a building permit in Ashland County, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

Ashland County runs no building department of its own: commercial and industrial permits in the unincorporated county come from the City of Ashland’s certified department, and zoning from each township.

Authority: City of Ashland Building and Zoning (commercial)Zoning: Township inspectorsPhone: 419-289-8744
Commercial outside the city
City of Ashland department206 Claremont Ave., 3rd floor
New houses outside the city
No county building permitZoning, septic and well still apply
Unzoned townships
Hanover and MohicanPer the county zoning list
Lot split
$125Lots of 1 to 20 acres

Ashland County government has no building department. Its Planning Department says commercial and industrial permits in the unincorporated county are issued by the City of Ashland, whose Building and Zoning Department at 206 Claremont Avenue is certified to enforce the Ohio Building Code there (419-289-8744). That county-wide role does not cover new single-family homes. A house in a township starts with the township zoning permit and the Ashland County Health Department’s sewage and well permits.

What requires a building permit in Ashland County?

Outside the City of Ashland the answer depends on what you are building.

City department permit

  • New commercial and industrial buildings in the unincorporated county
  • Alterations to existing commercial buildings
  • Changes of use, even with no construction
  • Commercial mechanical, electrical, plumbing, sprinkler, fire alarm and hood work, priced on the city’s schedule

Exempt statewide

  • Detached one-story sheds and playhouses: up to 120 square feet under the Ohio Building Code, 200 at a house
  • Fences: up to 7 feet under the Ohio Building Code, 6 at a house
  • Retaining walls 4 feet or lower that support no surcharge
  • Minor repairs that cut no walls, touch no structural supports and leave the exits alone

A township zoning permit is the most common local approval. The county’s zoning page says almost every township has a zoning resolution and map, and that anyone in a zoned area needs a zoning permit to build a new structure, change an existing one or change a property’s zoning. Its list of inspectors marks Hanover and Mohican townships as unzoned.

What Ashland County decides and what the state holds

The state sets the codes, licenses commercial trade contractors and certifies the City of Ashland’s department. The county commissioners adopted the subdivision regulations (the Ashland County Engineering Code, amended January 14, 2010), and the county also publishes access management regulations; townships adopt and enforce zoning; the health department permits sewage systems and wells. For a new single-family home outside the city, the county’s zoning page names no building department, and under ORC 3791.04(A)(1) no house plans need be submitted where no department certified for residential buildings has jurisdiction.

Ashland County building department: who handles permitting

The City of Ashland’s Building and Zoning Department wears two hats. Inside the city it is certified for both residential and commercial buildings; across the rest of the county it is certified for nonresidential buildings only. Its City Engineer and Building Official is Shane Kremser, PE, CBO. The county Planning Department, run for the commissioners by the Ashland Soil and Water Conservation District, handles lot splits but not building permits.

Short on time to read all of this?

Get a free quote →
Ashland County permit contacts
OfficeRole and contact
City of Ashland Building and Zoning DepartmentCommercial building permits in the unincorporated county; 206 Claremont Avenue, 3rd Floor, Ashland, OH 44805; 419-289-8744; Monday–Friday 8:00 a.m.–4:00 p.m.
City of Ashland Engineering DivisionNumber given on the county zoning page: 419-289-8331
Ashland County Planning DepartmentLot splits and subdivisions; 110 Cottage Street, Ashland; 419-281-7645
Ashland County Health DepartmentSewage systems and private water systems; 1211 Claremont Avenue, Ashland; 419-282-4231, Environmental Health 419-282-4337
Ashland County Engineer419-282-4281
Township, village and city zoning inspectorsListed by the county Planning Department

Cities and villages

The City of Ashland (18,730 people in 2025) issues all its own residential and commercial permits; see the City of Ashland guide. The villages are Loudonville (2,662 in Ashland County), Perrysville (729), Jeromesville (529), Hayesville (441), Bailey Lakes (347), Savannah (331), Polk (306) and Mifflin (154). The county’s zoning list includes inspectors for Bailey Lakes, Hayesville, Loudonville, Perrysville, Polk and Savannah. The city department’s page says its commercial certification covers the remainder of Ashland County, while the county’s zoning page speaks of the unincorporated portions, so a village project should be checked with the village and the city department. The state’s building-department look-up map shows the department for a specific address.

Ashland County permit types

Residential permits

For a house in a township, the approvals that apply are local and health related rather than a building permit:

  • Zoning permit from the township zoning inspector for a new home, garage, addition or other structure, unless the township is unzoned.
  • Household sewage treatment system permit from the health department, issued before any work; installations run from April 15 to November 15, later only after consulting the department.
  • Private water system permit for a new or altered well, also from the health department, applied for on the statewide form and built by a contractor registered and bonded with the Ohio Department of Health, who must disinfect the system when the work is done.
  • Lot split approval from the Planning Department if the house sits on a newly divided parcel.

Commercial permits

New commercial and industrial buildings, alterations and changes of use outside the city go to the City of Ashland’s department. It takes nonresidential plan approval applications online, with the plan approval fee worked out on a worksheet inside the application; other permit applications can be emailed to bzpermits@ashland-ohio.com. Payment is due on submission and can be made by card over the phone. The city’s fee schedule lists separate building, mechanical, electrical, plumbing, sprinkler, fire alarm, hood and sign scopes, and certificates of occupancy for existing buildings.

Not sure this scope needs a permit?

Get a free quote →

What comes before the building permit

  • Zoning. Contact the township or village zoning inspector first; the county posts each township’s zoning resolution and the form for amending one.
  • Planning Commission. It usually meets on the second Wednesday at 7:00 p.m. in the Visitor Center Community Room at Freer Field, 1264 South Center St., and oversees development in the unincorporated county. Its 11 members are the three county commissioners, or their alternates, and eight residents they appoint, and many of its zoning decisions draw on the county’s Comprehensive Land Use Plan, which several townships have adopted.
  • Lot splits. Parcels of 1 to 20 acres in unincorporated areas need Planning Department approval under the subdivision regulations, which can take several weeks; parcels under 1 acre or not meeting the regulations use the exempted process and cannot be built on.
  • Roads. The county’s access management regulations govern new access points on its roads; ask the County Engineer.
  • Sewage. On unsewered lots the health department’s site review comes first. The application needs the fee, a tax map, a detailed site drawing, a septic design and a soils report from a certified soil consultant; a sanitarian visits the site, and an approval letter setting the system requirements is valid for one year. The owner then buys the installation permit, which may call for the township zoning permit, and the registered installer signs it; the permit is valid for one year.

Ashland County permit costs and fees

No county building fee schedule exists. Commercial permits issued by the City of Ashland follow the city Building and Zoning Department’s posted fee schedule (the file is named for 2020 and shows no ordinance number), plus the 3% state assessment on nonresidential fees.

City of Ashland commercial permit fees
ScopeFee
Building$225 base plus $7.50 per 100 sq ft (or per 100 linear ft)
Mechanical$225 base plus $5.00 per 100 sq ft; $225 per Type I or II hood
Electrical$225 base plus $5.00 per 100 sq ft; new service $125; temporary service $175
Plumbing$200 including up to 5 fixtures, plus $20 per fixture
Sprinkler / fire alarm$225 base plus $5.00 / $3.00 per 100 sq ft
Signs$100 per wall or ground sign
Existing building certificate of occupancy; Type A day care$200 each
Phase approval; temporary structure$150 per phase; $175 per structure
Revision or preliminary plan review$100 per hour
Electronic submission$25

Rather talk it over?

Call 1-855-478-4290 →
County and health department fees
ItemFee
Lot split (Engineer $45, health $30, soil and water $30, Planning $20)$125
Exempted lot split$20
Sewage system application$110
Sewage system installation permit (includes $50 operation permit)$349 ($225 local, $74 state)
Sewage system alteration permit$310 ($225 local, $35 state)
Installer, service provider or septage hauler registration$150 each
New private water system, single-family / other$384 / $409, each including a $75 water sample
Altered private water system, single-family / other$185 / $195, each including a $75 water sample
Water sample from an existing system$100

Example from the city schedule: a new 4,000-square-foot commercial building has a building scope fee of $225 plus 40 × $7.50, or $525, plus 3% for $540.75; electrical, mechanical and plumbing scopes are added on top. The health department’s sewage fees are dated December 29, 2023.

Trade permits and who may pull them

On commercial jobs outside the city, the City of Ashland’s department reviews and inspects the mechanical, electrical, plumbing, sprinkler and fire alarm scopes along with the building; its staff include plans examiners and electrical safety and plumbing inspectors.

  • Contractor registration. The city’s fee schedule charges $100 for an initial contractor registration and $75 for the annual renewal.
  • State licenses. Contractors doing commercial electrical, HVAC, hydronics, plumbing or refrigeration work need an Ohio Construction Industry Licensing Board license; Ohio has no general contractor license.
  • Sewage system contractors. Installers, service providers and septage haulers must register with the health department each year ($150).
  • Homeowners. With no county residential building program outside the city, the county’s pages set no homeowner permit rule; the health department still issues the sewage and well permits for the owner’s site.

Rather not deal with the Ashland County building department?

Get a free quote →

How to get a commercial permit in unincorporated Ashland County

1. Confirm the location

Check that the site is outside the City of Ashland and find its township on the county zoning list or the state look-up map.

2. Get the zoning permit

Apply to the township or village zoning inspector; Hanover and Mohican townships have no zoning.

3. Line up site approvals

Arrange sewage and water approval with the health department and road access with the County Engineer.

4. File the plan approval

Submit the City of Ashland’s online non-residential plan approval application with drawings and the fee worksheet.

5. Pay on submission

The department processes applications once payment is received; card payments are taken at 419-289-8744.

6. Build and inspect

Start only after approval and call for inspections as the work reaches each stage.

Review, corrections and what causes delay

The city moved its plan approval applications to new software and asks applicants to report problems by email or phone. Delays usually come from missing zoning approval or an unresolved sewage design; revised drawings are reviewed at $100 an hour, as is partial or preliminary review. A phased project pays $150 for each phase approval.

Inspections in Ashland County

Commercial inspections outside the city are made by the City of Ashland’s staff, whose mechanical replacement application spells out the general rule: request a rough inspection before any work is covered and a final inspection when the work is done, with the manufacturer’s installation instructions on site. Approved work ends with a certificate of occupancy or completion; the city charges $200 for a certificate of occupancy for an existing building.

Sewage systems are inspected by the health department during installation. Before that inspection the installer files an as-built record and a completion form, the department approves the system once the work and paperwork are complete, and it makes an operation inspection within 12 months of installation. Septic contractors must be registered with the department, and repair loans are available for failing systems, though not for rental properties or new homes.

Ohio building code in Ashland County

The Ohio Building Code is enforced in the unincorporated county by the City of Ashland’s department under its county-wide nonresidential certification. FEMA’s Community Status Book lists unincorporated Ashland County (community 390759) as participating in the National Flood Insurance Program, with a current effective map date of August 18, 2009.

Want this handled start to finish?

Get a free quote →

Ohio has statewide building codes: the Ohio Building Code for commercial and other nonresidential buildings and the Residential Code of Ohio for detached one-, two- and three-family dwellings. Only departments certified by the Ohio Board of Building Standards may approve plans and inspect, and residential rules are uniform statewide. How Ohio’s statewide code works

Ashland County permit search and official resources

Records for commercial permits outside the city are kept by the City of Ashland’s Building and Zoning Department; ask it for plan approvals and certificates for a parcel. The county Planning Department holds lot split and subdivision files, and the health department holds sewage and well permits. The Board of Commissioners’ office, which oversees the Planning Department, is at 110 Cottage Street and open weekdays from 8:00 a.m. to 4:00 p.m.

Inspections are where schedules slip.

Get a free quote →

Ashland County building permit FAQs

Does Ashland County have a building department?

No. Commercial and industrial permits in the unincorporated county come from the City of Ashland’s Building and Zoning Department at 206 Claremont Avenue.

Do I need a building permit for a new house in a township?

The county names no residential building department for the townships. You still need the township zoning permit (except in Hanover and Mohican) and health department sewage and well permits.

How much does a lot split cost?

$125, shared between the County Engineer, the health department, the soil and water district and the Planning Department; an exempted split is $20.

What does a septic permit cost?

A $110 application plus a $349 installation permit, which includes the $50 operation permit; installs run April 15 to November 15.

What does a new well permit cost?

$384 for a single-family home, which includes the $75 water sample; the well must be drilled by an Ohio Department of Health registered contractor.

Who do I call about zoning?

The zoning inspector for your township, village or city; the county Planning Department posts the list.

How are commercial permits priced?

On the City of Ashland’s schedule: for example $225 plus $7.50 per 100 square feet for the building scope, plus 3% for the state.

Simplify Ashland County permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Ohio. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Ashland County sooner?

Let Alliance prepare, file, and track your Ashland County permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Ashland County permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.