Skip to main content
Municipal GuideOhioAshland County · Ashland

Ashland, Ohio Building Permit Guide

To get a building permit in Ashland, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

The City of Ashland’s Building and Zoning Department at 206 Claremont Avenue reviews plans, issues permits and inspects both homes and commercial buildings in the city, with plan approval applications filed online.

Authority: Ashland Building and Zoning DepartmentZoning permit: $50Phone: 419-289-8744
Authority
Building and Zoning Dept.206 Claremont Ave., 3rd floor
House plan approval
$75 + $2.50 per 100 sq ftBuilding portion
Fence, shed or deck
$40 permitPools $50
Hours
Mon–Fri 8:00–4:00419-289-8744

In the City of Ashland, the Building and Zoning Department at 206 Claremont Avenue, 3rd Floor (419-289-8744), is the Board of Building Standards-certified office for residential and commercial plan approvals, permits and inspections; the same office issues the city’s zoning permits. Plan approval applications are filed online and paid on submission. A house addition, for example, is priced at a $75 base plus $2.50 for every 100 square feet.

What requires a building permit in Ashland?

The city applies the state rule: anyone who intends to build, enlarge, alter, repair, move or change the use of a building, or to install or change its electrical, gas, mechanical or plumbing systems, must apply to the building official and get approval first. Homes fall under the Residential Code of Ohio and other buildings under the Ohio Building Code.

Approval needed

  • New houses, additions and alterations, with building, electrical, plumbing and HVAC plan approvals
  • Commercial buildings, tenant changes, signs and fire protection systems
  • Pools that need electrical work (a residential plan approval on top of the pool permit)
  • Decks over 200 square feet, over 30 inches high, attached to the house or serving an exit door
  • Furnace, air conditioner or heat pump replacement, on the mechanical replacement form
  • Zoning permits for new buildings, additions, alterations, site work and changes of use

No plan approval (city FAQ)

  • One-story detached accessory buildings up to 200 square feet
  • Fences up to 6 feet and retaining walls up to 4 feet that carry no surcharge
  • Sidewalks and driveways no more than 30 inches above grade and not over a basement
  • Painting, papering, tiling, carpeting, cabinets and counter tops
  • Freestanding decks of 200 square feet or less and no more than 30 inches high that serve no exit door
  • Swings, playground equipment and window awnings projecting no more than 54 inches

Exempt from plan approval is not the same as permit-free. Sheds up to 200 square feet, detached decks and pools still need the city’s $40 or $50 miscellaneous permit, fences need a $40 fence permit, and the zoning permit applies whenever a new structure or addition goes up. The FAQ also lists small electrical, gas and mechanical items that need no approval, such as replacing a breaker with one of the same rating in the same place.

What Ashland decides and what the state holds

The state writes the codes and certifies the department. The city sets its permit fees, its zoning, fence and sign regulations, contractor registration, site development and right-of-way rules and sewer connection charges, and it hears appeals through its own Board of Building Appeals, Board of Zoning Appeals and Planning Commission.

Short on time to read all of this?

Get a free quote →

Ashland building department: who handles permitting

The department is the city’s single point for permits and the reviews tied to them. Its City Engineer and Building Official is Shane Kremser, PE, CBO, and its staff include plans examiners and building, electrical safety and plumbing inspectors, so trade work is reviewed and inspected in-house. The office also serves the rest of Ashland County, but only for commercial buildings; see the Ashland County guide for the townships and villages.

Ashland permit contacts
DetailInformation
OfficeBuilding and Zoning Department, 206 Claremont Avenue, 3rd Floor, Ashland, OH 44805
Phone / fax419-289-8744 / 419-281-8052
HoursMonday–Friday, 8:00 a.m.–4:00 p.m.
Online filingResidential and non-residential plan approval applications at permits.ashland-ohio.com
Other permitsEmailed to bzpermits@ashland-ohio.com
CertificationResidential and commercial in the city; commercial only in the rest of Ashland County

The city has 18,730 residents in the Census Bureau’s 2025 estimate. Septic systems and private wells, where they exist, are the Ashland County Health Department’s at 1211 Claremont Avenue.

Ashland permit types

The department upgraded its plan approval system and now takes residential and non-residential plan approvals through separate online applications; everything else is sent by email. The plan approval fee is calculated on a worksheet inside the application, and nothing is processed until payment is received.

Residential permits

  • Residential plan approval for new homes, additions and alterations, priced on a base fee plus square footage for each of building, electrical and HVAC, with plumbing priced by fixture.
  • Miscellaneous permit for detached decks, porches and sheds up to 200 square feet ($40) and for pools ($50).
  • Fence permit with a site sketch showing where the fence goes ($40).
  • Mechanical equipment replacement for furnaces, air conditioners and heat pumps; once approved, the application itself serves as the certificate of plan approval.
  • Homeowner combination permit ($50) for alterations, remodeling, plumbing, electrical or heating work done by the homeowner.

The city publishes a prescriptive wood deck construction guide and a list of deck and ramp plan requirements to help with smaller jobs.

Commercial permits

Non-residential plan approval covers building, mechanical, electrical, plumbing, sprinkler and fire alarm scopes, kitchen hoods, signs and certificates of occupancy for existing buildings, with phased approvals available. Sign permits cost $40 per sign and some signs also need a non-residential plan approval.

Not sure this scope needs a permit?

Get a free quote →

Signs are governed by Chapter 1184 of the city code, last revised by Ordinance 16-20 (passed March 17, 2020). Unless a sign is exempt, a permit from the code official is needed to put it up, and the application must include construction drawings with dimensions, materials and anchorage, the property owner’s or tenant’s written consent, and sealed engineering where the Ohio Building Code requires it. Changing the copy or faces of an approved sign is not a structural alteration. Exempt signs include official notices, government directional signs, address signs up to 6 square feet with no advertising, and a single home occupation sign up to 1 square foot mounted flat on the wall.

What comes before the building permit

  • Zoning permit ($50). Needed before new buildings, alterations, additions, site development or a change of use, on residential and non-residential property alike; attach a site plan or sketch. The form asks for the zoning district (residential R-L, RL-2, RL-3, R-A, R-S and R-M, business B-1 to B-3, manufacturing M-1 to M-4, or S-U), the construction cost, the front, side and rear setbacks, the parcel number, whether the site is in a flood hazard area, and the general contractor’s city registration number.
  • Site development permit ($150). For new construction, additions and related site work such as new or larger parking lots, with engineered plans and the architect or engineer named on the form; subdivision review is $100 per lot. Large jobs can ask for phased approval of the stormwater pollution prevention plan, grading or foundation before the full approval.
  • Right-of-way permit ($75) for work in the street, and a sanitary or storm sewer permit ($75) for new connections.
  • Board of Zoning Appeals or Planning Commission applications cost $100 each.
  • Demolition permit ($75) needs a site plan and an asbestos report.

Ashland permit costs and fees

Figures come from the Building and Zoning Department’s posted fee schedule (the file is named 2020 fee schedule and does not cite an ordinance) and its permits page, which match. Residential fees carry the 1% Board of Building Standards assessment and commercial fees 3%.

Rather talk it over?

Call 1-855-478-4290 →
Ashland residential fees
ItemFee
Building: new construction, addition or alteration$75 base plus $2.50 per 100 sq ft
Electrical: new construction, addition or alteration$75 base plus $2.50 per 100 sq ft
HVAC: new construction, addition or alteration$75 base plus $2.50 per 100 sq ft
Plumbing$50 base, $25 plan review, $10 per trap or fixture
Replacement water heater; furnace, AC or heat pump; ductwork only$30; $50; $50
Electric service, temporary service, panel upgrade (up to 3 circuits)$50 each; added circuits $10 each
Homeowner combination permit$50
Re-inspection$50 per inspection
Certificate of occupancy; temporary and final$50; $100
Ashland commercial and other fees
ItemFee
Commercial building scope$225 plus $7.50 per 100 sq ft
Commercial mechanical, electrical or sprinkler scope$225 plus $5.00 per 100 sq ft
Commercial fire alarm scope; plumbing$225 plus $3.00 per 100 sq ft; $200 for up to 5 fixtures plus $20 each
Zoning permit; home occupation$50; $50
Board of Zoning Appeals; Planning Commission$100; $100
Contractor registration$100 initial; $75 annual
Sanitary sewer tap where no assessment was levied: 4-inch; 6-inch; 8-inch$500; $1,150; $2,500
Sewer, drain or lateral inspection; re-trip when work does not match the application$25; $10 per trip
Street opening, improved; unimproved$30; $10
Residential Board of Building Appeals hearing$75

Two examples from the schedule: a 600-square-foot home addition has a building fee of $75 plus 6 × $2.50, or $90, plus 1% for $90.90, with electrical and HVAC priced the same way if they are part of the job. A 2,000-square-foot commercial alteration has a building scope fee of $225 plus 20 × $7.50, or $375, plus 3% for $386.25.

Trade permits and who may pull them

Electrical, plumbing and HVAC work in the city is approved and inspected by the department itself; there is no separate county plumbing permit in Ashland.

Rather not deal with the building department?

Get a free quote →
  • Contractor registration. The fee schedule charges $100 to register a contractor and $75 a year to renew, and the sewer permit form asks for the contractor’s registration number.
  • Homeowners. An owner doing alterations, remodeling, plumbing, electrical or heating work on the home can use the $50 homeowner combination permit.
  • Equipment swaps. Furnace, air conditioner and heat pump replacements use a short application asking for fuel, input BTUs, refrigerant, duct changes and the equipment cut sheets.
  • State licenses. Commercial electrical, HVAC, hydronics, plumbing and refrigeration contractors must hold an Ohio Construction Industry Licensing Board license; Ohio licenses no general contractors.

How to apply for an Ashland building permit

1. Talk to the building official

The city’s FAQ recommends an early conversation with the Building Official before plans are drawn.

2. Get the zoning permit

Send the zoning application with a site plan and the $50 fee to bzpermits@ashland-ohio.com.

3. Add site permits

File site development, right-of-way or sewer permits if the project needs them.

4. File the plan approval online

Use the residential or non-residential plan approval application and complete its fee worksheet.

5. Pay on submission

Pay online or by card over the phone at 419-289-8744; processing starts once payment arrives.

6. Build to the approved plans

Keep the approval and plans on site and call for inspections at each stage.

Review, corrections and what causes delay

Because the plan approval system is new, the department asks applicants to report any technical problems by email or phone. Unpaid fees stop an application from being processed, and missing zoning approval or a site plan holds up the building review. A certificate of plan approval is the owner’s legal right to build what the approved documents show, so changes to the design need a revised submission before that work is built.

Inspections in Ashland

The department’s inspectors cover building, electrical and plumbing work. The contractor or owner requests a rough inspection before any work is covered and a final inspection when the job is complete; for equipment replacements the old unit must stay on site for the inspector, smoke detection must be tested during the visit, and the manufacturer’s installation instructions must be on hand. Because a replacement inspection is minor, no separate on-site inspection record is issued for it.

Each re-inspection on a house costs $50. The process ends with a certificate of occupancy or a certificate of completion; a temporary and final certificate of occupancy together cost $100. Appeals of the building official’s decisions go to the city’s Board of Building Appeals.

Want this handled start to finish?

Get a free quote →

Ohio building code in Ashland

Ashland’s department enforces the Residential Code of Ohio and the Ohio Building Code in the city and posts free links to the state codes. FEMA’s Community Status Book lists the City of Ashland (community 390007) as participating in the National Flood Insurance Program, with a current effective map date of August 18, 2009.

Ohio has statewide building codes: the Ohio Building Code for commercial and other nonresidential buildings and the Residential Code of Ohio for detached one-, two- and three-family dwellings. Only departments certified by the Ohio Board of Building Standards may approve plans and inspect, and residential rules are uniform statewide. How Ohio’s statewide code works

Ashland permit search and official resources

Permit and plan approval records are kept by the Building and Zoning Department; ask it at 419-289-8744 or bzpermits@ashland-ohio.com for the files on an address. The zoning permit application lists the property’s zoning district, which the office can confirm.

Inspections are where schedules slip.

Get a free quote →

Ashland building permit FAQs

Who issues building permits in Ashland?

The city’s Building and Zoning Department at 206 Claremont Avenue, 3rd Floor, for both homes and commercial buildings.

Do I need a permit for a shed?

A shed up to 200 square feet needs no plan approval but does need the $40 miscellaneous permit and must meet zoning setbacks.

How much is a permit for a fence?

$40, with a sketch showing where the fence will go; fences up to 6 feet need no plan approval.

How are house permits priced?

$75 base plus $2.50 per 100 square feet for the building portion, with electrical and HVAC priced the same way and plumbing by fixture, plus 1%.

Can a homeowner do the work?

The fee schedule has a $50 homeowner combination permit for alterations, remodeling, plumbing, electrical or heating work done by the homeowner.

Do I need a zoning permit?

Yes, for any new building, addition, alteration, site development or change of use; it costs $50.

What if my lot is in a flood hazard area?

Say so on the zoning and site development applications, which both ask the question; the city takes part in the National Flood Insurance Program with maps dated August 18, 2009.

How do I pay?

Payment is due when you submit; the department takes credit cards by phone at 419-289-8744.

Simplify Ashland permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Ohio. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Ashland sooner?

Let Alliance prepare, file, and track your Ashland permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Ashland permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.