The City of Alliance Building Department, part of the Department of Engineering, Building & Zoning at 504 East Main Street (330-823-5122), issues residential building, electrical and mechanical permits inside the city, with Shane Howard as Residential Building Official. Commercial plan review, permits and inspections are handled by the Stark County Building Department. A new house costs a $60 application plus $0.075 a square foot, an $85 plan review fee and the 1% state surcharge, every contractor must register with the city, and the office takes only checks or cash.
What requires a building permit in Alliance?
Alliance’s zoning page puts it simply: almost everything from a fence, porch or garage to an addition or a new business needs some kind of permit or approval, and the first step is usually an Application for Zoning Certificate. The building department’s FAQ then sorts common house projects:
Zoning and building permit
- New houses, additions and garages, after zoning approval
- Carports, which need a footer and engineer-stamped drawings from the supplier
- Decks, porches and patio enclosures, with footers and drawings
- Sheds of 201 square feet or more, on a footer or foundation
- Every roofing project (no more than two layers of shingles) and every siding project
- Structural retaining walls over 48 inches from footer to top
- Electrical, heating and cooling, and plumbing work, each on its own permit
Zoning application only, or nothing
- Fences: zoning application, no building permit
- Sheds up to 200 square feet: zoning application, no building permit
- Replacement windows and doors of the same size: no permit
Under Ohio law construction, alteration or equipment of a building may not begin until its plans are approved as required, and Alliance will not inspect work that has no permit. Commercial sites follow the same rule through the Stark County Building Department, which the city says is required for all commercial renovations and new construction.
What Alliance decides and what the state holds
The Residential Code of Ohio is a state code; Alliance enforces it for homes. City Council sets the fees in Codified Ordinance sections 117.03 to 117.06 (the building fee schedule rests on Ordinance 09-21, passed February 1, 2021), requires every residential and commercial contractor to register, licenses plumbing contractors through the city health department, and runs its own zoning code, Board of Zoning Appeals and floodplain permit.
Alliance building department: who handles permitting
The Building Department handles residential plan review, permits, inspections and certificates of occupancy for new homes. For commercial projects it refers applicants to the Stark County Building Department, and its residential fee sheets carry the same note. Plumbing is handled by the Alliance City Health Department, which registers plumbers and inspects plumbing, while commercial plumbing plans are reviewed by the Stark County Health Department.
Short on time to read all of this?
Get a free quote →| Detail | Information |
|---|---|
| Building Department | Department of Engineering, Building & Zoning, 504 East Main Street, Alliance, OH 44601 |
| Phone / fax | 330-823-5122 / 330-829-2236 |
| eng.bld.zon@allianceoh.gov | |
| Hours | Monday to Friday, 8:00 a.m. to 4:00 p.m. |
| Residential Building Official | Shane Howard |
| Plumbing | Alliance City Health Department, 330-821-7373 |
| Commercial plumbing plan review | Stark County Health Department, 7235 Whipple Avenue NW, 330-493-9904 |
| Planning & Development | 504 East Main Street, 330-829-2235, Monday to Friday 8:30 a.m. to 4:30 p.m. |
Part of Alliance lies in Mahoning County. Commercial work anywhere in the city goes to the Stark County Building Department (see Stark County building permits). The Board of Building Standards look-up map confirms the department for any address near the city line.
Alliance permit types
The city posts separate applications for a building permit, an electrical permit and a mechanical permit, plus forms to move or raze a building and for signs. Separate permits are required for building, electrical, HVAC and plumbing work on the same job.
Residential permits
- New houses and additions need zoning approval first, then a plan review (the city posts a plan review application, a submittal checklist and a document package for a new residence) and the building permit.
- Alterations and repairs such as roofing, siding, decks, ramps and chairlifts use the building permit at a flat fee. Re-roofs need the contractor signature page, and the contractor emails photos from all sides showing the bare deck, ice guard and underlayment.
- Accessory buildings over 200 square feet need zoning approval and a building permit; the department’s FAQ puts the line at 201 square feet, and the fee sheet prices accessory buildings of 200 square feet and over.
- Electrical permits cover new construction (with temporary and permanent service), alterations and upgrades, water heaters, generators, pools and solar panels; solar needs plan review.
- Mechanical permits cover furnaces, air conditioners, mini-splits, vented appliances such as fireplaces and wood burners, rooftop units and water heaters.
- Moving or razing a building, with site restoration, has its own application.
Building or remodeling a home here? Alliance handles residential permit expediting, so the crew isn't waiting on the counter.
Not sure this scope needs a permit?
Get a free quote →Commercial permits
Commercial plan review, permits and inspections for renovations and new construction are performed by the Stark County Building Department. Within the city, a commercial project still needs a $100 zoning application for business development or a tenant change, sign permits from the Zoning Department, a site plan through the Planning Commission, commercial plumbing plan review by the Stark County Health Department, and city registration for every contractor.
For tenant improvements and new commercial builds, Alliance handles commercial permit applications through issuance. More on this: commercial building permits explained.
What comes before the building permit
- Zoning certificate. Talk to the Zoning Code Enforcement Officer about whether the project is allowed in its district, then file the Application for Zoning Certificate. The officer may suggest a meeting with the City Engineer and the Planning and Development Director.
- Site plan drawing. The zoning application asks for a drawing showing the lot dimensions with a north arrow, front, side and rear setbacks, the location, length, width and height of each structure, known easements, and the square footage of existing and proposed buildings, with lot coverage worked out. The owner is responsible for finding the property lines, and the city strongly recommends a pin survey before applying.
- Board of Zoning Appeals. Variances and appeals are heard on the third Tuesday of each month in the second-floor conference room of the Administration Building; the fee is $70 for a residential use and $165 for a non-residential or conditional use.
- Floodplain permit. The city’s zoning fee table includes a $150 flood plain permit; ask the Zoning Department whether a parcel lies in a mapped flood area before you design.
- Signs. Temporary signs, such as garage sale and real estate signs, and permanent business signs all need a sign permit.
Alliance permit costs and fees
Alliance’s fees sit in Codified Ordinance 117.03 to 117.06; the fees page dates them from Ordinance 09-21, passed February 1, 2021, and the posted sheets are dated March 23, 2022. They are residential fees only; commercial fees are Stark County’s. Add 1% to the total for the state surcharge, and pay by check or cash.
Rather talk it over?
Call 1-855-478-4290 →| Work | Fee |
|---|---|
| New house or addition (building) | $60 application + $0.075 per sq ft including garage ($60 minimum); basement only if habitable |
| Plan review: new house, addition, attached garage | $85 flat ($85.85 with the 1% surcharge); one resubmittal free, then $42.90 each |
| Plan review: accessory building, alteration, detached garage, solar | $10 |
| Alterations and repairs (roofing, siding, decks, ramps) | $60 application + $60 permit |
| Accessory building 200 sq ft and over | $60 application + $60 permit |
| Electrical: new construction | $60 + $60, plus $45 temporary and $45 permanent service |
| Electrical: water heater, generator, pool / solar | $60 application + $40 each / $60 |
| Mechanical: furnace or AC / both / rooftop unit | $60 application + $40 / $50 / $110 |
| Move a building / raze a building | $60 + $375 / $60 + $100 |
| Re-inspection / no-show | $35 / $50 |
| Zoning: accessory use / new house / home occupation / commercial | $35 / $50 / $65 / $100 |
| Floodplain permit; sign permit | $150; $15 temporary, $50 permanent |
| Contractor registration | $135 new; $105 renewal |
Worked example from the schedules: a new 2,000 sq ft house with garage pays a $60 application plus 2,000 × $0.075 = $150, or $210, and the $85 plan review, for $295; the 1% state surcharge brings it to $297.95. Electrical and mechanical permits and the $50 zoning application are separate.
Trade permits and who may pull them
Every contractor, residential or commercial, must register to work inside Alliance city limits. A registration runs for a year or part of a year and expires on January 31; it costs $135 for a new applicant and $105 to renew. The application needs a workers’ compensation certificate, liability insurance of at least $100,000 per occurrence, a city income tax registration form for new applicants, and the state license where one applies.
Rather not deal with the building department?
Get a free quote →- Electrical, fire protection and HVAC contractors must hold a current state license to register.
- Plumbing contractors register with the Alliance City Health Department instead ($100), which licenses all plumbing contractors working in the city and issues plumbing permits for new and remodel work.
- General and specialty contractors (concrete and asphalt, demolition, decks, excavation and tapping, fencing, masonry, roofing and siding) register on the same form; Ohio has no state license for them.
- Commercial trade contractors also need the OCILB license for commercial work and file their commercial permits with Stark County.
How to apply for an Alliance building permit
Check with the Zoning Code Enforcement Officer and file the Application for Zoning Certificate.
Each contractor registers with the city; plumbers register with the health department.
For a new house or addition, file the plan review application with the checklist items.
File the building, electrical and mechanical applications, and the plumbing permit with the health department.
Credit cards are not accepted at the Building Department.
Send plans, permit applications and inspection requests to the Stark County Building Department.
Review, corrections and what causes delay
A new house or addition gets one plan resubmittal at no extra charge; later resubmittals cost $42.90 each. Missing zoning approval stops a new-construction permit, and carports need engineer-stamped drawings while decks need footer details, so leaving them out holds up review. Appeals of building department decisions are billed at the city’s actual cost, with a $300 minimum deposit refunded if the appeal succeeds. Under the state codes approved plans lapse if work does not start within 12 months.
Inspections and certificates in Alliance
Call 330-823-5122 at least 24 hours ahead to schedule; there are no inspections without a permit. The city’s sheet lists inspections in order: excavation (forms and rebar before concrete), footers, foundation (with waterproofing, drain tile and gravel), concrete floors, rough framing, insulation, rough electrical and rough heating and cooling. Plumbing is inspected by the Alliance Health Department (330-821-7373).
Electrical and plumbing finals must be approved before the mechanical and building finals. The Residential Building Official issues the certificate of occupancy on every new house. Re-inspections for incomplete or faulty work cost $35, and a no-show costs $50.
Ohio building code in Alliance
The city enforces the Residential Code of Ohio for homes, and the Stark County Building Department enforces the Ohio Building Code for commercial work in Alliance. FEMA lists the City of Alliance (community 390508, Stark and Mahoning counties) as participating in the National Flood Insurance Program, with flood maps effective September 29, 2011.
Want this handled start to finish?
Get a free quote →Ohio has statewide building codes: the Ohio Building Code for commercial and other nonresidential buildings and the Residential Code of Ohio for detached one-, two- and three-family dwellings. Only departments certified by the Ohio Board of Building Standards may approve plans and inspect, and residential rules are uniform statewide. How Ohio’s statewide code works
Alliance permit search and official resources
Residential permit and inspection files are kept by the Building Department at 504 East Main Street; ask by phone or at the counter for a copy. Plumbing records are with the health department, and commercial permit records for Alliance are with Stark County.
- Alliance Building Department
- Permit applications
- Fees and Ordinance 09-21
- Building permit fees
- Plan review and registration fees
- Electrical permit fees
- Mechanical and HVAC permit fees
- Plan review
- Inspections
- Required inspections, in order
- Building Department FAQs (sheds, fences, roofs)
- Contractor registration application
- Zoning and Board of Zoning Appeals
- Zoning fees
- Health department plumbing permits and registration
- BBS building-department look-up map
Inspections are where schedules slip.
Get a free quote →Alliance building permit FAQs
Does Alliance issue commercial building permits?
No. All commercial plan reviews, permits and inspections in Alliance go through the Stark County Building Department; the city handles residential work.
Do I need a permit for a shed?
A shed up to 200 square feet needs only a zoning application; one of 201 square feet or more needs a foundation, drawings and a building permit.
Do I need a permit for a fence?
No building permit, but every fence needs a zoning application.
Does a new roof need a permit?
Yes, every roofing project does, and no more than two layers of shingles are allowed.
How much is a permit for a new house?
A $60 application plus $0.075 a square foot including the garage, an $85 plan review fee and 1% for the state; a 2,000 sq ft house comes to $297.95 before trade and zoning fees.
How do contractors register?
With the Building Department for $135 ($105 to renew), expiring January 31; plumbers register with the city health department for $100.
Can I pay by credit card?
No. The Building Department accepts check or cash only.
Simplify Alliance permitting with Alliance Permitting
Alliance Permitting is a permit documentation and submission company in Ohio. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Alliance sooner?
Let Alliance prepare, file, and track your Alliance permits while your crew stays on the job.
More Ohio permitting guides
Stark County
Read guide →Canton
Read guide →Massillon
Read guide →Amherst Building Permit Guide
Read guide →Ashland Building Permit Guide
Read guide →Ashland County Building Permit Guide
Read guide →This guide is provided by Alliance Permitting for general information about Alliance permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.