Skip to main content
Municipal GuideIllinoisWestern Springs · Cook County

Western Springs, Illinois Building Permit Guide

To get a building permit in Western Springs, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

Western Springs’ Community Development Department issues building permits for work inside the village, takes applications by email at permits@wsprings.com and charges 1.75% of construction cost under the fee schedule the Village Board adopted on February 23, 2026.

Authority: Western Springs Community DevelopmentFiling: Email or Village HallPhone: 708-246-1800 ext. 180
Authority
Community Development740 Hillgrove Avenue
Building permit fee
1.75% of cost$50 minimum; $15,000 cap
Contractor license
$125 a yearExpires December 31
Inspections
inspections@wsprings.com48 hours’ notice

In the Village of Western Springs, building permits come from the Community Development Department at Village Hall, 740 Hillgrove Avenue (708-246-1800, ext. 180), led by Director of Community Development Heather Valone. Applications and contractor license forms go to permits@wsprings.com or the Village Hall drop box. Under Ordinance 26-3312 of February 23, 2026, a building permit costs 1.75% of construction cost up to $1 million, with a $50 minimum and a $15,000 cap, and minor permits can often be issued over the counter.

What requires a building permit in Western Springs?

The village’s building permit information sheet says permits are needed for construction of any type and gives a long list that also covers insulation, skylights, sump pumps and drain tile, sewer and water service changes, lawn sprinklers, grading changes, chicken coops, artificial turf and pergolas.

Permit needed

  • New buildings, additions, structural repairs and demolition
  • Decks, porches, garages, carports, sheds and fences, including pet fences
  • Footings, slabs, driveways, aprons, patios, sidewalks, sports courts and pools
  • New circuits, panels, services, solar panels, generators and alarm systems
  • Furnaces, air conditioners, ductwork, water heaters and fuel piping
  • Roofs, siding, chimneys, masonry walls, steps and stoops
  • Kitchen cabinet and countertop replacement; new wallboard over 100 sq ft
  • Signs, tents, scaffolding on public property and street openings

Zoning limits to plan around

  • Fences: 42 inches in front and corner side yards, 72 inches in side and rear yards
  • Fences built finished side out, without changing the grade
  • Sheds: rear yard only, 14 ft high at most
  • Sheds 5 ft from interior side and rear lines, 10 ft from the house
  • Sheds count toward the 50% lot coverage and 30% building coverage limits

If you are unsure whether a job needs a permit, the sheet asks you to call Community Development at ext. 180. Emergency repairs made outside office hours need a retroactive permit application no later than the next business day, and the finished work must still be inspected.

What Western Springs decides and what the state holds

Western Springs adopts its own building code. Ordinance 26-3314, approved February 23, 2026, replaced the amended 2006 International codes and 2005 electrical code that had been in use since September 2014 with the 2018 International Building, Residential, Mechanical, Fuel Gas, Existing Building, Swimming Pool and Spa and Property Maintenance codes, the 2017 National Electrical Code and the 2024 International Energy Conservation Code as amended by Illinois. The 2018 International Fire Code, the 2014 Illinois State Plumbing Code and the 2018 Illinois Accessibility Code stay in force. Zoning rules sit in the village’s Development Control Ordinance.

Western Springs building department: who handles permitting

Community Development enforces the building, zoning and health regulations, issues permits for new construction and alterations, and inspects the work. It also runs zoning administration, with variations going to the Board of Zoning Appeals and smaller residential relief going to the Director under the administrative variation process added in 2026. Land outside the village in unincorporated Cook County is permitted by the county’s Department of Building and Zoning instead.

Short on time to read all of this?

Get a free quote →
Western Springs permit contacts
DetailInformation
OfficeCommunity Development, Village Hall, 740 Hillgrove Avenue, Western Springs, IL 60558
Phone708-246-1800, ext. 180 (permits); ext. 191 (inspections)
Emailpermits@wsprings.com; plans@wsprings.com for engineering plans; inspections@wsprings.com
HoursMonday to Friday, 8:30 a.m. to 5:00 p.m.; a drop box is checked daily
DirectorHeather Valone, Director of Community Development

The village’s April 2025 permit information sheet still places the office in the Fire Department building at 4353 Wolf Road. The department page and every 2026 form give 740 Hillgrove Avenue, so use that address.

Western Springs permit types

Most work uses one building permit application, which asks for the estimated cost, every contractor and subcontractor, and whether the job needs a Cook County or IDOT right-of-way permit, any demolition, a Cook County demolition permit, or work near parkway trees. Its third page is the zoning and development data worksheet, where you show setbacks, building coverage and total impervious area. Signs, home occupations and temporary signs have their own forms.

Residential permits

  • New homes, additions and garages need a digital set of architect-stamped drawings marked “Drawn to Western Springs Code and Building Regulations” with light and vent schedules, plumbing, electrical and HVAC diagrams and zoning calculations, plus an engineer’s topographic survey, a plat with marked lot corners, a site management plan, Manual J and S HVAC calculations and an energy compliance report. Fire system plans go in four sets, one to the village fire marshal and three for outside review. Lots zoned R-2 need a surveyor’s block-face average to set the front setback.
  • Interior remodels need digital architectural plans sent to permits@wsprings.com.
  • Decks, fences and patios need a current plat, the signed contract and construction details; the village building inspector reviews them before issue. Fences need the owner’s written acknowledgement that the finished side faces out.
  • Roofs, windows and sewer repairs need a copy of the signed contract or proposal.

Commercial permits

Commercial projects follow the same application and the 2018 codes, and the submittal chart adds fire alarm plans, soils reports and structural calculations. Section 9-1-7B of the fee schedule lists commercial work at the consultant’s direct cost or $85 an hour in house, and business owners can ask for a courtesy walk-through before construction.

Not sure this scope needs a permit?

Get a free quote →

What comes before the building permit

  • Zoning. Check setbacks, coverage and the gross floor area limit with the village’s calculator. Variations go to the Board of Zoning Appeals ($2,500); since January 26, 2026 the Director can grant small administrative variations for single-family lots, such as garage setbacks or 100 extra square feet of coverage, for $250 after notice to properties within 150 feet and a 10-day comment period.
  • Engineering. New homes, garages and additions with foundations need a stormwater management and site development review, and other projects need a topography and drainage plan where the village engineer asks for one or impervious area grows by 200 square feet; allow at least 20 extra working days.
  • County and state permits. Demolition, abatement and right-of-way work need the Cook County or IDOT permit the application asks about.
  • Site preparation. New-home sites need a 6-foot locked chain link fence, silt fencing and the village work-rules sign before work starts.

Western Springs permit costs and fees

Fees are set in the Village Fee Schedule, Exhibit A to Ordinance 26-3312, passed on February 23, 2026 after Finance Committee review on January 20. It applies one percentage scale to building work and caps exterior jobs lower:

Western Springs fee schedule, Ordinance 26-3312 (February 23, 2026)
ItemFee
Building construction permit1.75% of cost up to $1,000,000; 1% of the next $4,000,000; 0.75% above $5,000,000; $50 minimum, $15,000 maximum
Fence, roof, sign, gutters and soffits, siding, masonry and chimney, windows and doorsSame percentages; $50 minimum, $1,500 maximum
Pet fence$50
Site development permit$200 per lot; subdivisions and planned developments $2,000 plus $500 per acre
Re-inspection$125 or the consultant’s direct cost, whichever is greater
Work without a permit200% of the permit fee
Water tap / sewer main connection$1,000 each
Street opening$150
Temporary occupancy permit / zoning compliance review$100 each
Variation / administrative variation$2,500 / $250
Conditional use$3,000 with new structures; $1,000 without
Map amendment / text amendment$3,000 / $1,000

Rather talk it over?

Call 1-855-478-4290 →

Examples from the scale: a $40,000 kitchen remodel costs 1.75% of $40,000, or $700; a $12,000 roof costs $210; a $1.2 million new house would reach $17,500 at 1.75% on the first $1 million, so the $15,000 cap applies. A $100,000 exterior project is held to the $1,500 exterior cap.

Larger projects also carry review charges. Section 9-1-7A of the schedule lists $2,000 for residential construction such as new homes and additions, $2,500 for commercial work, $2,000 for a detached garage and $65 for all other permits; the permit information sheet calls the new-home and addition amount a deposit, payable by check, and the submittal chart asks for a plan review deposit set by Community Development. Section 9-1-7B lists $2,500 for a new single-family house, $1,200 for a larger addition, garage, pool or sports court, $550 for patios and accessory structures and $800 for demolition.

Trade permits and who may pull them

Western Springs licenses its contractors. A license runs from the date of application to December 31 and costs $125 a year, and no permit is issued until every contractor on the application is licensed and bonded with the village. Requirements by trade, from the village’s contractor license application:

  • General contractors: $1 million general liability certificate and a $10,000 surety bond.
  • Subcontractors such as carpenters, concrete, masonry, HVAC, paving and excavating: a $10,000 surety bond and the fee.
  • Electricians: a copy of the electrical license; the license application and the 2026 fee schedule list the $125 fee, although the 2025 permit information sheet says electricians pay none.
  • Plumbers: a copy of the state plumbing license and no fee; every plumbing permit needs a letter of intent on the licensed plumber’s stationery naming the job address, owner, work and start date. Water and sewer contractors repairing or adding taps file a current state plumbing license.
  • Roofers, solar and EV charger installers and fire sprinkler contractors: bond, trade license and fee.
  • Right-of-way work: a $10,000 surety bond even for trades that otherwise post none.

On new homes and additions, a homeowner acting as general contractor provides the same $1 million insurance certificate and $10,000 bond.

Rather not deal with the building department?

Get a free quote →

How to apply for a Western Springs building permit

1. Check zoning first

Work out setbacks, coverage and floor area with the zoning worksheet and the gross floor area calculator, and ask Community Development about any relief you need.

2. License your contractors

Each contractor files the license application with its bond, insurance and $125 fee at permits@wsprings.com.

3. Prepare drawings and surveys

Assemble plans, plat, contract and the items the submittal chart marks for your project type.

4. Send engineering plans separately

Topographic and drainage plans go to plans@wsprings.com as one combined PDF named by street address and plan type.

5. File the application

Email the signed application and documents to permits@wsprings.com or leave them in the Village Hall drop box.

6. Pay and post the permit

Pay the fee and any deposit, post the permit where it can be seen and keep approved plans on site.

Review, corrections and what causes delay

Most minor permits can be issued over the counter. Permits that need review take at least 10 working days, not counting new developments or large additions, and a development permit with a topographic survey adds at least 20 working days for the village engineer. Delays usually come from unlicensed or unbonded contractors, a missing contractor list, drawings without the required zoning calculations, and engineering files sent as separate attachments, which are not accepted. Applications expire six months after they are filed; once issued, work must start within six months, and the permit then runs one year, with extensions considered on a written request made before it expires.

Inspections and certificates in Western Springs

Email inspections@wsprings.com with the project address and permit number in the subject line, the inspection type, a contact name and phone number and the date you want, or call ext. 191 during business hours. Inspections run Monday to Thursday from 7:30 a.m. to 2:30 p.m. and Friday from 7:30 to 11:00 a.m.; give at least 48 hours’ notice (the inspections page says 48 to 72), and requests for the next business day must be in by 2:30 p.m. Staff confirm the appointment by email.

  • Pre-demolition or site inspection where required, and a demolition-day inspection
  • Concrete pre-pour for footings, piers and walls, and for flatwork such as driveways and slabs
  • Underground water, sanitary and storm piping and taps; backfill, drain tile and damp-proofing, with a spot foundation survey before framing
  • Rough framing, electrical, plumbing and HVAC, then insulation and fire-stopping before drywall
  • Fire suppression rough and pressure test where installed, and final inspections for all trades and engineering

Sewer and water disconnect and tap inspections are booked through Community Development and take place on Tuesdays and Thursdays from 7:30 a.m. to noon. A job that is not ready or not accessible when the inspector arrives is charged a re-inspection fee, which must be paid before the next visit; the 2026 schedule sets it at $125 or the consultant’s cost, replacing the $100 on the older information sheet. No building may be occupied without a certificate of occupancy or a temporary one ($100). A permanent certificate is issued only when the project is 100% complete, including landscaping and grass for erosion control and approval of the as-built topographic survey.

Want this handled start to finish?

Get a free quote →

Illinois building code in Western Springs

Western Springs enforces the 2018 International codes and the 2017 National Electrical Code adopted by Ordinance 26-3314, with the 2024 energy code as amended by Illinois, the 2014 Illinois State Plumbing Code and its own Development Control Ordinance, through Community Development. FEMA’s Community Status Book lists the Village of Western Springs (community 170171) as participating in the National Flood Insurance Program, with its current flood map dated August 19, 2008; the village has no Community Rating System class. The village posts a flood prevention guide among its permit guides.

Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline

Western Springs permit search and official resources

Permit records are public records. The Village Manager’s office handles Freedom of Information Act requests, filed on the village’s printable request form or its online form. The village also posts building permit activity reports under Community Development, and the municipal code is published by American Legal Publishing.

Inspections are where schedules slip.

Get a free quote →

Western Springs building permit FAQs

How much is a building permit in Western Springs?

1.75% of construction cost up to $1 million, 1% of the next $4 million and 0.75% above that, with a $50 minimum and a $15,000 maximum. Exterior jobs such as roofs, fences and windows are capped at $1,500.

Do I need a permit to replace kitchen cabinets?

Yes. The village lists kitchen cabinet and countertop replacements, new wallboard over 100 square feet and insulation among the work that needs a permit.

How tall can my fence be?

42 inches in front and corner side yards and 72 inches in side and rear yards, with the finished side facing out. Pool fences are approved with the pool permit.

Where do I send my application?

Email it to permits@wsprings.com or drop it at Village Hall, 740 Hillgrove Avenue. Engineering plans go separately to plans@wsprings.com as one PDF.

Does my contractor need a village license?

Yes. Contractors pay $125 a year, and general contractors post a $10,000 bond and $1 million of insurance; plumbers file their state license without a fee.

How long does review take?

Minor permits are often issued over the counter; reviewed permits take at least 10 working days, plus at least 20 more where a development permit and topographic survey are required.

Simplify Western Springs permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Western Springs sooner?

Let Alliance prepare, file, and track your Western Springs permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Western Springs permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.