Skip to main content
Municipal GuideIllinoisHinsdale · DuPage County

Hinsdale, Illinois Building Permit Guide

To get a building permit in Hinsdale, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

Hinsdale’s Department of Community Development at Village Hall, 19 E. Chicago Avenue, issues building permits inside the village; since August 1, 2026 every submittal needs an electronic file as well as paper plans.

Authority: Department of Community DevelopmentFiling: Paper plus electronic filePhone: 630-789-7030
Authority
Community Development19 E. Chicago Avenue
Remodel fee
2% of value$139 minimum, 2026 rates
New buildings
$1.45 per sq ftFloor area incl. basement and garage
Like-for-like re-roof
No permitHouses only; commercial always

Inside the Village of Hinsdale, building permits are issued by the Department of Community Development at Village Hall, 19 E. Chicago Avenue (Building Department 630-789-7030; public hours 9 a.m. to 4 p.m., appointments 8 a.m. to 4:30 p.m.); Tim Ryan is the Building Commissioner. Since August 1, 2026, permit submittals must include an electronic file in addition to paper documents. Fees rose 3% on January 1, 2026: remodeling without new floor area costs 2% of the value of construction (at least $139), and new structures cost $1.45 per square foot of floor area.

What requires a building permit in Hinsdale?

Most residential and commercial projects in Hinsdale need a permit, and approved plans must then be built as approved; any change needs village approval first. The village’s code adoption deleted the model codes’ lists of work exempt from permits, so the village’s own list is the guide. Anything not on it can be checked with the Building Department.

Permit required

  • New homes and garages, additions, remodels, renovations and alterations
  • Demolition of any structure on the property
  • Decks, patios, porches, hardscape, pergolas, fire features, outdoor kitchens and sheds
  • Driveways and aprons, private walks and coach walks in the right of way, exterior steps and stoops, garage slabs
  • Fences, pools and spas
  • Grading changes and interior or exterior drain tile
  • Foundation repairs
  • Relocated or added plumbing, altered electrical systems, solar panels, EV chargers and generators
  • Air conditioner or furnace replacement and water heaters
  • Irrigation, sewer repairs and clean-outs, water service upgrades or repairs
  • Residential elevators

No permit

  • Millwork and trim
  • New flooring or refinished hardwood floors
  • Painting
  • One-for-one replacement of windows, doors, siding or roofing on a single-family home

The house exemptions have limits. A residential roof overlay or tear-off to the deck needs no permit, but replacing more than half of the sheathing, or changing the roofing material, does. Siding needs a permit when exterior insulation finishing system (EIFS) is replaced with another material, and windows and doors need one when an opening is changed. Commercial and multi-family roofing, siding and window work always needs a permit.

What Hinsdale decides and what the state holds

Hinsdale has adopted the 2021 International Building, Residential, Existing Building, Fire, Mechanical, Fuel Gas, Property Maintenance and Swimming Pool and Spa codes and the 2020 National Electrical Code, each with local amendments; its amended IBC section 903.2 requires sprinklers in the listed building types for new construction, a change of use, a remodel costing more than 25% of the building’s value, added height or more than 500 square feet of added floor area. The posted adoption ordinance also adopts the 2021 International Plumbing Code with local changes, such as Type L copper water piping, while the village’s permit pages and information sheets cite the 2014 Illinois State Plumbing Code; the energy code on the sheets is the 2021 IECC as amended by Illinois.

Short on time to read all of this?

Get a free quote →

Hinsdale building department: who handles permitting

Building staff in the Department of Community Development administer the zoning rules, building codes and life safety requirements, review plans and inspect construction before a certificate of occupancy is released. The Building Commissioner is the staff liaison to the Zoning Board of Appeals, and the Assistant Director of Community Development works with the Plan Commission and the Historic Preservation Commission. Some plan reviews are sent to outside agencies. Hinsdale lies mostly in DuPage County with a smaller part in Cook County; unincorporated land nearby is permitted by DuPage County Building and Zoning (630-407-6700) or Cook County’s Department of Building and Zoning (312-603-0500), each for unincorporated areas only.

Hinsdale permit contacts
DetailInformation
OfficeDepartment of Community Development, Village Hall, 19 E. Chicago Avenue, Hinsdale, IL 60521
Building Department630-789-7030 (remodel sheet also lists 630-789-7031)
Village Hall630-789-7000
HoursPublic hours 9 a.m. to 4 p.m. weekdays; by appointment 8 a.m. to 4:30 p.m.
Building CommissionerTim Ryan, CBO
Plans by emailcomdev@villageofhinsdale.org

Hinsdale permit types

One village permit application covers building permits (driveways, fences, hardscape, new construction, remodels, additions), electrical, plumbing, HVAC, fire alarm and suppression, grading and drainage, and demolition-only permits. The form asks whether the home is more than 50 years old, whether it sits in the Robbins Park Historic District and whether it is in the Historic Overlay District, and any work in the right of way needs a printed photograph of the parkway before the permit can issue. PDF plans go to comdev@villageofhinsdale.org with the paper set.

Residential permits

  • Remodels and alterations. Three sets of architectural-quality drawings showing existing conditions, demolition and the new work, including joist and beam sizes and spans; the general contractor must be registered, and a remodel needing a plumbing permit needs an approval letter from the Flagg Creek Sanitary District (630-323-3299).
  • New homes. Three sets of stamped architectural plans with floor-by-floor overlays and square footage, a proposed construction schedule and a Certificate of Zoning Compliance application, plus stormwater management and maintenance agreements and engineering review fees paid with the submittal.
  • Information sheets. The village posts sheets for detached garages, additions, sport courts, swimming pools, fences, fire features, generators and demolition, and a pre-plan review for single-family properties ($163).
  • Historic homes. Local landmarks and properties in the Robbins Park Historic District need a Certificate of Appropriateness from the Historic Preservation Commission for new construction, demolition or exterior improvements.

Not sure this scope needs a permit?

Get a free quote →

Commercial permits

Non-residential and multi-family site improvements pay an engineering review and inspection fee of 1% of the engineer’s cost estimate when final engineering plans are submitted, business occupancy permits cost $240, and hood and duct systems, fire suppression, fire pumps and fire alarms have their own fees. Plans sent to a third-party reviewer are billed at the reviewer’s charge plus 20%, with a deposit taken at application.

What comes before the building permit

  • Zoning relief. Plan Commission and Zoning Board of Appeals applications are filed with the Community Development Director. Under the June 1, 2024 zoning fee schedule a variation request costs $1,100 at filing ($350 in fees and a $750 escrow), and a residential Certificate of Zoning Compliance $50.
  • Historic review. A Certificate of Appropriateness for demolition or new construction costs $900 at filing, and demolishing a principal structure in the Robbins Park Historic District carries a higher permit fee.
  • Stormwater. Stormwater filing and permit fees are $411 each, and the stormwater facility maintenance agreement for a new home is recorded against the property.
  • Trees. The village arborist reviews tree plans for $207, including site visits.

Hinsdale permit costs and fees

Permit fees are set in Village Code Section 9-1-4 and rise automatically each January 1 with the consumer price index; a Building Commissioner memo of April 9, 2026 lists the 2026 amounts after a 3.0% increase. Plan review fees are not refundable, and the minimum fee for any permit not listed is $139.

Rather talk it over?

Call 1-855-478-4290 →
Hinsdale permit fees (effective January 1, 2026)
ItemFee
New structure, floor area incl. basements, attics and garages$1.45 per sq ft to 25,000 sq ft; $0.75 per sq ft above
Remodeling or alteration with no new floor area2% of construction value, $139 minimum
In-house plan review$110 per hour, one hour paid at application
Expedited review (if approved)1.5 times the plan review rate
Fence; driveway or paving; residential flatwork; grading$55.75 each, plus plan review where noted
Swimming pool$278
Demolition, principal structure; in Robbins Park district$9,756; $11,715 (plus plan review)
Demolition, accessory structure$139 plus plan review
HVAC base fee$139, plus $55.75 per air conditioner or air handler
Electrical base fee; per circuit$139; $21
Plumbing base fee; per fixture$139; $41.85
Re-inspection$139
Temporary occupancy$342 plus a 150% surety for unfinished work
Work started without a permitGreater of $250 or 50% of the permit fee, added

Worked examples from the 2026 rates: a new house with 4,000 sq ft of total floor area, counting basement and garage, pays 4,000 × $1.45, or $5,800, before plan review, trade and utility fees; a $40,000 kitchen remodel that adds no floor area pays 2%, or $800, plus plan review at $110 an hour. A new 1-inch water tap costs $785 and a 3/4-inch meter $416, and water used before a meter is installed is billed $411 a quarter. Signs cost $5.55 per square foot ($92.95 minimum), and overtime inspections, when the Building Commissioner approves them, cost $116 an hour with a two-hour minimum.

Trade permits and who may pull them

General contractors who oversee a project and hire subcontractors must register with the village each calendar year: a registration application, an original $10,000 surety bond running January 1 to December 31, a certificate of insurance of at least $500,000/$1,000,000 combined single limit naming the Village of Hinsdale as certificate holder and additional insured, and a $250 check ($125 after July 1), delivered in person or by mail to Community Development.

Several subcontractors file papers without a form or fee by emailing subcontractorregistration@villageofhinsdale.org: electrical contractors send a current license certificate and a $5,000 surety bond, plumbing contractors a current state 055 license and a letter of intent for the job site, fire alarm contractors their state license, and roofers on commercial or multi-family work their state license. HVAC, landscaping and framing contractors do not register because they normally work under the general contractor. All bonds and licenses must be on file before a permit is issued.

Rather not deal with the building department?

Get a free quote →

How to apply for a Hinsdale building permit

1. Check history and zoning

Find out whether the home is a landmark or in the Robbins Park district, and whether zoning relief is needed.

2. Register the contractors

The general contractor registers yearly; listed trades email their licenses and bonds.

3. Assemble the submittal

Complete the permit application with plans and plats, a cover letter and an electronic file of everything.

4. Pay review fees up front

Plan review (and for new homes stormwater, engineering and zoning compliance fees) is paid with the submittal.

5. Answer the deficiency letter

Mark every change on revised plans and explain it in a cover letter.

6. Pay at issuance

When emailed that the permit is ready, pay by cash or check and collect the placard and approved plans.

Review, corrections and what causes delay

Plans are entered into the system and checked for zoning and code compliance, often by more than one reviewer (engineering, zoning, forestry). If they are not approved, the village sends a letter listing the deficiencies, and the cycle repeats until the plans pass. Missing contractor bonds or licenses hold up issuance, and the village notifies the applicant of any that are missing when the permit is ready. Expedited review is available for new construction, additions and remodeling if the Building Commissioner approves it.

Inspections and certificates in Hinsdale

A remodel typically needs a rough inspection (framing, electrical, mechanical and plumbing) after conduit and rough plumbing are in and before walls are insulated, an insulation inspection before drywall, and a final inspection before anyone moves in; occupancy is allowed only after Community Development approves it and issues the certificate of occupancy. Failing to call for these inspections violates the village code. Allow 24 hours’ notice for final inspections; the Building Department is at 630-789-7030.

The permit placard and approved plans must stay on site throughout the job. Construction noise is allowed only from 8 a.m. to 8 p.m. on weekdays and 8 a.m. to 4 p.m. on Saturdays, with no work on Sundays, and mud, debris and dust must not leave the site; violations can bring citations, fines of up to $750 each and stop-work orders. On teardowns, the demolition date is phoned in no more than four and no fewer than two days ahead, and a new home closes out with three final topographic surveys once grass is established and a final engineering inspection. After the finals pass, the original bond receipts go to the Building Commissioner, and cash bonds are refunded about 30 days later.

Illinois building code in Hinsdale

FEMA’s Community Status Book lists the Village of Hinsdale (community 170105, in DuPage and Cook counties) as participating in the National Flood Insurance Program, with flood maps effective August 1, 2019.

Want this handled start to finish?

Get a free quote →

Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline

Hinsdale building permit FAQs

Do I need a permit to replace my roof in Hinsdale?

Not for a house, if it is a like-for-like overlay or tear-off. Replacing more than half the sheathing or switching materials needs one, and commercial or multi-family roofs always do.

How much does a remodeling permit cost?

2% of the construction value, at least $139, plus plan review at $110 an hour.

Can I submit plans only by email?

No. Since August 1, 2026 submittals include paper documents plus an electronic file; PDFs go to comdev@villageofhinsdale.org.

Does my contractor have to register?

General contractors register yearly ($250, $10,000 bond); electricians, plumbers, fire alarm and commercial roofers email their licenses, and HVAC, landscaping and framing contractors do not register.

What are the construction hours?

8 a.m. to 8 p.m. weekdays and 8 a.m. to 4 p.m. Saturdays; no Sunday work.

Do historic homes need extra approval?

Yes. Landmarks and Robbins Park Historic District properties need a Certificate of Appropriateness for new construction, demolition or exterior improvements.

How do I pay for the permit?

By cash or check when the permit is issued.

Hinsdale permit search and official resources

The Building Department (630-789-7030) answers questions about a permit’s status, and the village posts building permit activity reports. Copies of permit files are requested from the Village Clerk on the village’s Freedom of Information request form, at 19 E. Chicago Avenue, by fax to 630-789-7015 or by email (630-789-7011 for questions); the first 50 standard black-and-white copies are free, extra pages are 15 cents each, and certifying a record costs $1.

Inspections are where schedules slip.

Get a free quote →

Simplify Hinsdale permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in Hinsdale sooner?

Let Alliance prepare, file, and track your Hinsdale permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about Hinsdale permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.