Skip to main content
Municipal GuideIllinoisDeKalb · DeKalb County

DeKalb, Illinois Building Permit Guide

To get a building permit in DeKalb, confirm which office issues permits for the property’s address, then submit the application with your plans and required documents, pay the permit fees, and pass inspections before final approval. Alliance Permitting can prepare, file and track the permit for you and schedule the inspections.

The City of DeKalb’s Building & Code Compliance Division at 164 East Lincoln Highway issues building permits inside the city limits, taking applications through a BS&A Online account.

Authority: Building & Code Compliance DivisionFiling: BS&A OnlinePhone: 815-748-2070
Authority
Building & Code Compliance164 E. Lincoln Hwy, DeKalb
Addition fee
$120 + $0.10 per sq ftSchedule B, one- and two-family
Contractors
$50 a yearRegistration renews by Dec. 31
Inspections
24 hours’ notice72 hours for finals; 815-748-2070

Inside DeKalb, building permits come from the Building & Code Compliance Division of the Community Development Department, 164 East Lincoln Highway (815-748-2070, building@cityofdekalb.com, Monday to Friday, 8 a.m. to 5 p.m.). Homeowners and contractors apply online through a BS&A account, uploading the matching city application form. Fees come from Schedules A to D in Chapter 24 of the Municipal Code: a house addition, for example, starts at $120 plus $0.10 per square foot of footprint, and the city aims to return first plan comments within two weeks.

What requires a building permit in DeKalb?

DeKalb lists more than 20 permit applications, from decks, pergolas, fences, sheds, detached garages, driveways and patios to electrical, HVAC, plumbing, roofing, solar, swimming pools and hot tubs, signs, demolition, mass grading and work in the right-of-way. New construction, additions, major alterations and any alteration that changes egress, structure or a major building system also need plans reviewed before the permit is issued. Chapter 24 of the Municipal Code, amended by Ordinance 2024-063 on December 9, 2024, lists the work that is exempt.

Permit needed

  • New homes, additions, remodels and interior demolition
  • Decks, porches, patios, pergolas and gazebos
  • Fences 3 feet tall or more
  • Sheds over 120 square feet or with a foundation; detached garages
  • Roofing, electrical, HVAC, plumbing, water heater and solar work
  • In-ground pools and larger above-ground pools and hot tubs
  • Driveways, sidewalks, curb cuts and street openings

Exempt under Chapter 24

  • One-story detached sheds and playhouses without foundations, up to 120 square feet
  • Fences under 3 feet
  • Retaining walls up to 2 feet at houses (4 feet under the building code)
  • Private walks no more than 30 inches above grade
  • Painting, tiling, carpet, cabinets and countertops
  • Prefabricated above-ground pools under 24 inches deep and up to 5,000 gallons
  • Free-standing decks up to 120 square feet and 30 inches high that do not serve the required exit door

What DeKalb decides and what the state holds

DeKalb is a home-rule city and writes its own building code. Chapter 24 adopts the 2021 International Building, Residential, Fire, Mechanical, Fuel Gas, Existing Building, Property Maintenance and Swimming Pool and Spa codes and the 2023 National Electrical Code, using the International Plumbing Code only for roof drainage. The city says the 2024 revision answered Public Act 103-0510, a state law in force from January 1, 2025 that requires local codes to be at least as strict as the statewide structural baseline and that overrides home-rule power on that point; a Building Code Review Board of local contractors met every two weeks from January 2024 to recommend the changes. Plumbing follows the state’s Illinois Plumbing Code (2014) with city amendments. For the state energy and accessibility codes, the Building Codes page lists the 2024 Illinois Energy Conservation Code and the 2018 Illinois Accessibility Code, while the adoption list inside Chapter 24 still names the 2021 energy code and the 1997 accessibility code.

Short on time to read all of this?

Get a free quote →

DeKalb building department: who handles permitting

The Building & Code Compliance Division reviews applications, issues permits, inspects construction and enforces the property maintenance code; Chapter 24 makes its Chief Building Official the code official. The department also handles zoning and contractor registration. The city permits only inside its corporate limits: unincorporated land around DeKalb goes to the DeKalb County Community Development Department, 110 E. Sycamore Street in Sycamore (815-895-7188), which issues all building permits in unincorporated DeKalb County.

DeKalb permit contacts
DetailInformation
OfficeBuilding & Code Compliance Division, 164 East Lincoln Highway, DeKalb, IL 60115
Phone and email815-748-2070 (also 815-748-2073 for inspections); building@cityofdekalb.com
HoursMonday to Friday, 8 a.m. to 5 p.m.
Contractor registrationThe registration page lists a Building & Code Enforcement office at 223 S. 4th Street, Suite A (815-748-2379)
Planning and zoningPlanning Director, 815-748-2361
City Hall main line815-748-2000

DeKalb permit types

Every online submission needs the completed city application for that kind of work, downloaded from the Building Permits & Fees page and uploaded with the plans. The New/Alteration application covers new buildings, additions, alterations and tenant buildouts; separate forms exist for roofing, decks, sheds and garages, fences, driveways, electrical, HVAC, plumbing, solar, pools, signs, demolition and temporary structures.

Residential permits

  • New houses. A $300 plan review fee is due with the application, and the permit fee is set by the floor area of living space and garage under Schedule A. All new homes and large additions also need a sign-off from DeKalb School District 428 at 901 S. 4th Street before the application goes in.
  • Roofs. The roofing form asks whether the job is a recover (two layers at most) or a tear-off, requires an ice and water shield inspection, and must carry the contractor’s state roofing license number.
  • Smaller jobs. Decks, fences, patios, sheds, pools, driveways and water heaters use their own forms and the flat fees in Schedule B.

Commercial permits

Multi-family buildings of three or more units and commercial, industrial and institutional work fall under Schedules C and D. A $1,000 building plan review fee is due at submittal; a site improvement plan adds a $1,000 engineering review fee. Expedited review costs the $1,000 fee plus the outside reviewer’s charge (B & F Technical) and 10%. New commercial and industrial buildings need a Site Application approved by the Engineering Division. Businesses selling food send their construction plans to the DeKalb County Health Department (815-758-6673), and business signs, fire alarms and fire sprinklers are separate submittals.

Not sure this scope needs a permit?

Get a free quote →

What comes before the building permit

  • Zoning. The Unified Development Ordinance (Chapter 23) sets zoning. Variances, special uses, rezoning, subdivisions, planned developments and text amendments go to the seven-member Planning and Zoning Commission, which meets on the first and third Mondays at 6 p.m. in the Yusunas Meeting Room of the DeKalb Public Library, 309 Oak Street. The commission sends its recommendation to the City Council on every matter except variations. Chapter 9 fees: $100 for a residential variance, $250 for a non-residential one, $500 for a special use or rezoning and $100 for an appeal.
  • Sewer. New buildings and buildouts need a sign-off from the Kishwaukee Water Reclamation District, 1301 Sycamore Road, before you apply.
  • Floodplain. Article 11 of the Unified Development Ordinance requires new buildings and substantial improvements in a mapped A zone to have the lowest floor, basement included, 2 feet above the base flood elevation, and it restricts building in the floodway. The city’s Flood Information page posts the adopted changes to Article 11 and the floodplain management presentation given to the commission on February 17, 2026; Engineering answers flood map questions at 815-748-2331.
  • Right-of-way. Driveway aprons, curb cuts and street openings need the right-of-way application, and the contractor needs a Street Construction & Maintenance registration.

DeKalb permit costs and fees

Section 109.2 of Chapter 24 sets permit, plan review and inspection fees by Schedules A to D, each dated January 1, 2016 and posted as PDFs (“subject to change”). Schedule A gives one all-in fee for a new one- or two-family home, covering building inspections, up to four heating or cooling appliances, one sewer and storm tap, one 1-inch water tap and meter with the water capital fee, plumbing up to 18 fixtures, a 200-amp service and one driveway and curb cut.

DeKalb permit fees for one- and two-family homes (Schedules A and B)
WorkFee
New house plan review (with application)$300
New house, 850–1,000 sq ft$4,172
New house, 2,001–2,100 sq ft$4,389
New house, 3,001–3,100 sq ft$4,587
Addition (includes roofed porches)$120 plus $0.10 per sq ft of footprint
Alteration or remodel (includes interior demolition)$60 plus $0.05 per sq ft of footprint
Furnace, air conditioner or both; ductwork; fireplace$60 each
Electrical (5 openings); service up to 200 A$75; $75
Electrical service 201–400 A; over 400 A$150; $225
Plumbing (5 fixtures)$60 plus $10 per extra fixture
Water heater, softener or both$60
Detached garage$120 single stall plus $45 per extra space
Shed$45 up to 120 sq ft; $60 over 120 sq ft
Fence, open deck, roofless porch or pergola$60
Patio$45
Above-ground pool or hot tub; in-ground pool$60; $180 (plus electrical $60 or $100)
Driveway; sidewalk; curb cut$75; $30; $60
Demolition (not a garage)$300 plus $0.10 per sq ft at the base
Each inspection or re-inspection$60

Rather talk it over?

Call 1-855-478-4290 →

For multi-family and commercial work, Schedule C prices new buildings and additions by floor area, from $953 for up to 2,000 square feet to $2,401 for 9,001 to 10,000 square feet and $9,755 for 49,001 to 50,000, plus the $1,000 plan review fee. Worked example from Schedule B: a 400-square-foot house addition is $120 plus 400 × $0.10, or $160, before any HVAC, electrical, plumbing or water fees. Under Section 24.02, fees double if work starts before the permit is issued, an applicant who is not ready for a scheduled inspection pays $100 per inspector before it is rescheduled, and occupying a building before the occupancy certificate brings a fine of at least $250 a day.

Trade permits and who may pull them

Electrical, HVAC and plumbing work each have their own application and fee. DeKalb stopped licensing and testing electrical and HVAC contractors on March 13, 2017; instead, general contractors (including fence, sign and demolition firms), electrical, mechanical and solar contractors register every calendar year. Registration costs $50, renews by December 31 (or within 60 days after the term ends), and needs the application and a certificate of insurance with general liability of at least $100,000 per person and $300,000 per occurrence plus automobile and workers’ compensation cover. No permit is approved until the registration is on file.

  • Plumbers, roofers, fire alarm and sprinkler contractors file the city registration form with a copy of their state license; plumbing is inspected by the city’s plumbing inspector or a licensed plumber the City Manager appoints.
  • Right-of-way contractors register separately for $25 a year with a $10,000 surety bond on the city’s form and insurance.
  • Homeowners need no general, electrical or mechanical registration for their own work on a single-family house they own and live in. Chapter 24 also lets an owner who lives in a single-family house, or is building one to live in for at least two years, plan and install its plumbing; tenants and landlords may not do plumbing work.

Rather not deal with the building department?

Get a free quote →

How to apply for a DeKalb building permit

1. Confirm the city has the parcel

Addresses outside the corporate limits go to DeKalb County Community Development instead.

2. Clear zoning and sign-offs

Settle variances first, and get the Kishwaukee Water Reclamation District and, for new homes, School District 428 sign-offs.

3. Register

Create a BS&A Online account and ask, through the portal, to link it to your contractor or homeowner record; contractors also register with the city.

4. Upload the package

Attach the matching city application, plans and, for plan-review jobs, pay the plan review fee.

5. Answer comments

Review comments go to the design professional who submitted the plans; resubmit corrections that answer every comment.

6. Pay and build

Once plans are approved the fee is calculated, the owner is told the amount, and the permit issues when it is paid.

Review, corrections and what causes delay

Delays come from submissions without the completed city form, accounts not yet linked to a contractor or homeowner record, contractors whose annual registration has lapsed, missing district sign-offs, and corrections that leave comments unanswered.

Inspections and certificates in DeKalb

Call 815-748-2070 or 815-748-2073 to book an inspection, giving at least 24 hours’ notice, or 72 hours for a final. Inspectors work Monday to Friday, 8 a.m. to 3:30 p.m., and the city-stamped approved plans must be on site. For a new house the packet lists footings (drained, with a soils report from an Illinois licensed engineer unless designed for 1,500 pounds of bearing), foundation wall, backfill, underground work, garage and basement slabs, service and tap connections, rough-ins and framing, radon, insulation and the finals. Roof replacements need an ice and water shield inspection, booked at least 24 hours ahead.

Finals are not done while furniture or personal belongings are in the building, and moving in before the occupancy certificate is illegal; temporary occupancy inspections need 24 hours’ notice. When winter weather stops exterior work, the city accepts cash bonds for unfinished items.

Illinois building code in DeKalb

DeKalb enforces the 2021 International codes and 2023 National Electrical Code adopted in Chapter 24, with local amendments; two sets of the code books can be read at the Building Division during business hours. FEMA’s Community Status Book lists the City of DeKalb (community 170182) as participating in the National Flood Insurance Program, with flood maps dated January 2, 2009, and in the Community Rating System since May 1, 2005, at class 7 (a 15% flood insurance discount) since October 1, 2015.

Illinois leaves building codes to local government, but since 1 January 2025 any local code must regulate structural design at least as strictly as baseline editions of the International Building, Existing Building and Residential Codes, and where no code was adopted the statute sets minimums for commercial buildings and new homes (Public Act 103-0510). Illinois codes and the statewide baseline

Want this handled start to finish?

Get a free quote →

DeKalb building permit FAQs

How much is a building permit in DeKalb?

It depends on the schedule: a house addition is $120 plus $0.10 per square foot of footprint, a fence or deck $60, and a new house from $4,172 plus a $300 plan review fee.

Do I need a permit for a fence in DeKalb?

Yes for fences 3 feet tall or more; the fence permit costs $60. Fences under 3 feet are exempt from the permit.

Does a shed need a permit?

Not if it is a one-story shed without a foundation of 120 square feet or less. Larger sheds cost $60.

Can a homeowner pull the permit?

Yes. Owners working on the single-family house they own and live in need no contractor registration, and an owner-occupant may do the house’s plumbing.

Does DeKalb license electricians?

No longer. Since March 13, 2017 the city registers electrical and HVAC contractors for $50 a year instead of licensing them.

How long does plan review take?

The city aims to send first comments within two weeks, depending on project size and workload.

How much notice do inspections need?

At least 24 hours, and 72 hours for final inspections; call 815-748-2070 or 815-748-2073.

DeKalb permit search and official resources

For a permit’s status, call the Building & Code Compliance Division or check the application in your BS&A account. Copies of permit files are public records: send a Freedom of Information Act request to the City Manager’s Office through the DeKalb FOIA Center, by email, mail or fax, or in person (police records are handled separately). Copies under 50 letter or legal pages are free, and each page beyond 50 costs $0.15.

Inspections are where schedules slip.

Get a free quote →

Simplify DeKalb permitting with Alliance Permitting

250K+Permits approved
All 50States covered
21+ YearsJurisdictional depth
Done-for-youWe file, you build

Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.

Ready to break ground in DeKalb sooner?

Let Alliance prepare, file, and track your DeKalb permits while your crew stays on the job.

This guide is provided by Alliance Permitting for general information about DeKalb permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.