Billings is the largest city in Montana at about one hundred and twenty-two thousand residents, the economic hub of the state’s south-central region and the seat of Yellowstone County. Building permits are issued by the city’s certified Building Division at 2825 Third Avenue North, which requires online submission for all permits and enhances the statewide code with specific seismic and energy provisions.
This guide covers the certified Building Division and how to reach it, the uniform Montana code with the city’s enhancements, and how contractor registration and trade licensing work.
This guide covers work inside the City of Billings limits. Unincorporated Yellowstone County and neighbouring Laurel are separate authorities.
Billings runs a certified building program and requires online submission for all permits. As a certified jurisdiction it applies the uniform Montana code and enhances it with specific seismic and energy provisions for its commercial base. Confirm whether a parcel is inside the city or in unincorporated Yellowstone County, where the state Bureau may be the authority.
What requires a building permit in Billings?
Montana adopts a single statewide building code by rule — the Montana Building Code, based on the 2021 International Codes with state amendments in the Administrative Rules of Montana, Title 24, Chapter 301. But enforcement is split: the state Building Codes Bureau is the authority by default, and a city or county may enforce the code itself only once the state certifies its program. So the first question in Billings is not just what the code says — it is whether the Building Division is the authority having jurisdiction, and whether a permit is required at all.
Permit required
- New commercial and multi-family construction, additions, alterations and change of occupancy
- New residential construction within a certified jurisdiction that enforces the residential code
- Structural and load-bearing work, foundations and retaining walls above the code threshold
- Electrical work under the adopted National Electrical Code, including services, circuits, solar and EV charging
- Plumbing under the Uniform Plumbing Code, and mechanical work under the mechanical code
- Re-roofing above the exempt scope, decks over the exempt height, pools, signs and demolition
Often exempt or no permit
- Single-family homes in non-certified areas where no local program enforces the residential code
- Agricultural buildings, which carry specific state exemptions and modified requirements
- Small accessory structures below the code threshold, where zoning allows
- Painting, finish work and minor repairs replacing materials in kind
Because enforcement depends on certification, exemptions vary by location in a way they do not in many states — a single-family home may need a permit inside a certified city and none in a nearby non-certified rural area. An exemption from a building permit is never an exemption from zoning, floodplain, septic or an electrical or plumbing permit. Confirm scope with the Building Division before work starts.
Which authority applies — certified program or the state Bureau
Where a city or county holds a certified building-code program, that jurisdiction is the authority having jurisdiction and issues the permit. Everywhere else — the state’s vast non-certified areas — the Montana Building Codes Bureau in Helena is the authority, and it enforces primarily commercial and other covered buildings. Billings holds a certified program and is the authority inside the city; unincorporated Yellowstone County is handled by a certified county program or the state Bureau, so confirm the parcel.
Two environmental factors reach much of Montana. Snow loads are severe, and outside certified jurisdictions the design snow load follows Montana’s own ground-snow-load study rather than a single national value; seismic demand is significant in western Montana. Buildings with moderate-to-severe snow or seismic loads generally require drawings from a Montana-licensed design professional.
Who handles permitting in Billings?
The certified Building Division handles plan review, permit issuance and inspections inside the city, with required online submission.
| Detail | Information |
|---|---|
| Authority | City of Billings Building Division (certified) |
| Offices | 2825 Third Avenue North, Billings |
| Filing | Online submission required for all permits |
| Serves | Work inside the City of Billings limits |
| Enhancements | Specific seismic and energy provisions |
| Code | Montana Building Code (2021 I-Codes, ARM Title 24 Ch. 301) |
| Design loads | Snow and seismic; engineered drawings where required |
| Contractor credentials | State registration; electrical and plumbing state-licensed |
The certified Building Division reviews plans, issues permits and inspects construction inside the city, requiring online submission for all permits from its office at 2825 Third Avenue North. Billings enhances the statewide code with specific seismic and energy standards tailored to its growing commercial development. As the regional hub, it carries steady residential, commercial and industrial volume.
The base code is the uniform Montana code; what Billings adds is its certified-jurisdiction enhancements, the fee schedule and the inspection process.
Permit types
Residential permits
Residential work spans established neighbourhoods, infill and accessory dwellings. Re-roofs, decks, solar and EV chargers need permits, seismic and energy provisions apply, and contractors register with the state while electrical and plumbing work is tied to state-licensed installers.
How Montana contractor credentials work
Montana does not license general contractors for competency the way many states do. Instead, construction contractors register with the Department of Labor and Industry: a contractor with employees carries a construction contractor registration, while an owner-operator without employees may hold an independent-contractor exemption. The electrical and plumbing trades, by contrast, are licensed by state boards.
In Montana the credential question splits by trade. The general or specialty contractor registers with the state rather than passing a licensing exam, so the check there is registration status. But electrical and plumbing work is tied to a state-licensed electrician or plumber, and moderate-to-severe snow or seismic loads pull a Montana-licensed engineer or architect into the project. Confirm all three before filing.
Commercial permits
Commercial work runs from downtown and medical-corridor development to retail and industrial, all subject to plan review, the city’s seismic and energy enhancements, and state contractor registration, with electrical and plumbing tied to state-licensed installers.
Credentials: registration, trade licences and design professionals
Practically, three credential layers appear on Montana projects: contractor registration with the Department of Labor and Industry; state licences for the electrical and plumbing trades; and, where snow, seismic or non-conventional construction requires it, drawings stamped by a Montana-licensed design professional. Confirm what the Building Division requires for the specific building before filing.
Billings permit costs and fees
Budget the city building permit and plan-review fees, separate trade permits, and any design-professional drawings. Billings publishes a valuation-based schedule.
| Fee component | How it works |
|---|---|
| Building permit | Based on project valuation; set by the certified jurisdiction or the state schedule |
| Plan review | A percentage of the building permit fee, charged at submittal |
| Trade permits | Separate electrical, plumbing and mechanical fees |
| Design professional | Engineer or architect fees where snow, seismic or design triggers it |
| Zoning and floodplain | Local land-use, zoning or floodplain review where it applies |
| Re-inspections and revisions | Additional fees for failed inspections, revisions and expired permits |
Whether the certified jurisdiction or the state Bureau issues the permit, fees are valuation-based, with plan review charged as a percentage and trade permits billed separately. A figure quoted from a neighbouring town or an older packet is not reliable, so ask the Building Division for the schedule in force on your filing date, and budget separately for any required design-professional drawings.
Need a real number for a specific Billings project? Send us the scope, address and valuation and we will identify the authority having jurisdiction, the reviews it will trigger and the fee categories that will apply.
Trade permits and who may pull them
Trade permits are separate from the building permit and, in Montana, cannot be issued until the building permit is in place on projects that require one. Electrical and plumbing work is tied to a state-licensed electrician or plumber; the contracting business registers with the Department of Labor and Industry. Confirm both before filing.
Montana’s trade licensing is a state system, so it is consistent across the state. An electrical permit is tied to a state-licensed electrical contractor and a plumbing permit to a state-licensed plumbing contractor, whether the building permit comes from a certified city or the state Bureau. What varies is the counter that issues the permit and whether a permit is required at all.
- Electrical work follows the adopted National Electrical Code and is tied to a state-licensed electrician.
- Plumbing work follows the Uniform Plumbing Code and is tied to a state-licensed plumber.
- Mechanical work follows the mechanical code; the contractor still registers with the state.
Permit required
- Service installations, panel upgrades, new circuits, solar PV and EV chargers
- New plumbing, repipes, water heater change-outs, fixtures, backflow and gas piping
- HVAC installation and change-out, ductwork, venting and commercial kitchen exhaust
- Sprinkler, standpipe and fire alarm work on commercial and multi-family structures
Typically exempt
- Replacing a fixture, switch, receptacle or light with no alteration to wiring or piping
- Clearing a stoppage without replacing or rearranging concealed piping
- Filter, thermostat and routine component service
- Like-for-like appliance repair that does not alter the connection
How to apply for a Billings building permit
Unincorporated ground and Laurel are separate authorities.
Billings requires all permits to be submitted online.
The city enhances the statewide code on both.
Contractors register with the state; electrical and plumbing are state-licensed.
Moderate-to-severe snow or seismic loads trigger engineered drawings.
Confirm the sets and forms the Building Division needs.
Review, corrections and what actually causes delay
In Montana, the first cause of delay is confusion over the authority having jurisdiction — filing with the state Bureau when a certified city should have it, or the reverse. After that come snow and seismic engineering that needed a licensed design professional, a missing contractor registration or trade licence, and a submittal that did not match what the Building Division requires. State plan review averages about three weeks, so build that into the schedule.
Approvals do not stay live indefinitely. A Montana building permit carries a validity period and can expire if work does not start or stalls. On phased work or a project waiting on financing, confirm the expiry before it passes — reviving a lapsed permit is more work than keeping one active.
Inspections in Billings
Where a permit is required, standard checkpoints include footing and foundation, framing, rough-in electrical, plumbing and mechanical, insulation and energy, fire systems on commercial work, and final, with occupancy approval before use. The certified city program runs its own inspectors.
Field inspection staff for the state program are positioned around Montana to cover non-certified areas; certified jurisdictions run their own inspectors. Confirm which authority inspects your project and give the notice it asks for.
Do not cover work before the required inspection has been approved. Keep the issued permit, the approved plans, the snow-load and seismic documentation, product listings and your correction responses available on site.
Billings permit search and official resources
Permit records in Montana sit with the authority that issued them — a certified jurisdiction holds its own, while the state Building Codes Bureau holds records for projects it permitted in non-certified areas through the state EBIZ portal. Where the Building Division is the authority for the City of Billings limits, it holds the building permit, the inspection history and the certificate of occupancy. If you are buying, refinancing or renovating, confirm that past work was permitted rather than assuming it was.
Confirm the authority having jurisdiction first. Montana’s certified-versus-state split means the answer — and whether a permit was even required — varies by parcel. The code text is uniform statewide; the administering authority, the fee schedule and the land-use requirements are not. Confirm current requirements, fees and review turnaround for your filing date.
These are the primary sources behind this guide. Codes, fee schedules and portal procedures change — confirm the position for your filing date.
- City of Billings Building Division
- Montana Building Codes Bureau (DLI)
- Administrative Rules of Montana, Title 24 Ch. 301
- Montana DLI contractor registration
- Montana state permit portal (EBIZ)
Frequently asked questions
Where do I get a Billings building permit?
From the city’s certified Building Division at 2825 Third Avenue North; all permits must be submitted online.
Does Billings change the state code?
As a certified jurisdiction, Billings applies the uniform Montana code and enhances it with specific seismic and energy provisions.
Do I have to file online?
Yes. The Billings Building Division requires online submission for all permits.
Does Montana license general contractors?
No. Contractors register with the Department of Labor and Industry; electricians and plumbers are licensed by state boards.
When is an engineer required?
When a building carries moderate-to-severe snow or seismic loads, or does not meet conventional light-frame provisions, a Montana-licensed design professional is generally required.
How do I run a Billings permit search?
The certified city holds its own permit and inspection records for work inside the city.
Simplify Billings permitting with Alliance Permitting
Billings runs a certified program with required online filing and its own seismic and energy enhancements, so the details that matter are jurisdiction, the online submittal and the city’s add-ons. Getting those right keeps a filing predictable.
Trusted by leading builders, developers, and national contractors — 22 years of filing in the jurisdictions we write about.
Contractors and builders choose Alliance for Billings because the work is done by people who have stood at the counter:
- We confirm city-versus-county jurisdiction from the parcel.
- We set up the required online submission correctly.
- We account for the city’s seismic and energy enhancements.
- We confirm contractor registration and state trade licences.
- We assemble the plan set and track the review.
Alliance Permitting is a permit documentation and submission company in Montana. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Billings sooner?
Let Alliance prepare, file, and track your Billings permits while your crew stays on the job.
More Montana permitting guides
This guide is provided by Alliance Permitting for general information about Billings permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.