Palatine is a northwest Cook County suburb of about sixty-eight thousand residents, a commuter-rail community with a transit-oriented downtown and a stable residential base. Building permits are issued by the Village of Palatine building division under the village’s home-rule code.
This guide covers the building division, the home-rule code, the transit-oriented downtown, and how the statewide layers and registration work.
This guide covers work inside the Village of Palatine limits. Neighbouring villages and unincorporated Cook County are separate authorities.
Palatine runs its own home-rule building division, with a transit-oriented downtown driving mixed-use work alongside a steady residential base. The village issues permits under its own code. Confirm the parcel is inside Palatine rather than a neighbouring village like Schaumburg or Arlington Heights, or unincorporated Cook.
What requires a building permit in Palatine?
Illinois assigns building-code authority to local government, so for years different towns ran on different codes — and some had none at all. That changed with Public Act 103-0510, effective January 1, 2025, which requires a statewide baseline through the Capital Development Board: a jurisdiction that has not adopted its own building code must now follow the Board’s adopted International Building, Existing Building and Residential Codes. So the first question in Palatine is which local code and amendments apply — or the state baseline where none were adopted — and whether the parcel is municipal or in the unincorporated county.
Permit required
- New commercial, multi-family and residential construction, additions and change of occupancy
- Structural alterations, load-bearing changes, foundations, decks and retaining walls
- Electrical work — services, panels, circuits, solar and EV charging — under the adopted electrical code
- Plumbing under the statewide Illinois Plumbing Code, tied to a licensed plumber
- Mechanical and HVAC change-outs, and work affecting the energy envelope
- Re-roofing above the exempt scope, pools, signs, and demolition
Often exempt
- Minor repairs and maintenance replacing materials in kind
- Small accessory structures below the local threshold, where zoning allows
- Painting, flooring, cabinetry and other finish work
- Like-for-like fixture or appliance swaps with no alteration to wiring or piping
Because the code edition and its amendments are set locally, the exempt list and thresholds differ from one jurisdiction to the next — a project waved through in one town needs a full permit set in the next. An exemption from a building permit is never an exemption from zoning, the statewide energy or plumbing codes, or an electrical or plumbing permit. Confirm scope with the building division before work starts.
The statewide layers that apply everywhere
Three Illinois codes apply statewide regardless of what a jurisdiction has adopted: the Illinois Energy Conservation Code, which you must meet even where a town does not actively enforce it; the Illinois Plumbing Code, owned and enforced by the Department of Public Health, which also licenses plumbers; and the Illinois Accessibility Code, which carries the force of a building code. In Palatine, the building division administers the village’s home-rule building code, with a transit-oriented downtown and a residential base; the statewide Illinois codes apply on top.
Who handles permitting in Palatine?
The building division handles plan review, permit issuance and inspections inside the village under the home-rule code.
| Detail | Information |
|---|---|
| Authority | Village of Palatine building division |
| County | Cook |
| Serves | Work inside the Village of Palatine limits |
| Home rule | Village sets and amends its own code |
| Core | Transit-oriented downtown and residential neighbourhoods |
| Code | Palatine home-rule building code, plus statewide Illinois codes |
| Plumbing | Statewide Illinois Plumbing Code and state-licensed plumbers |
| Registration | Village contractor registration for permit-pulling trades |
The building division reviews plans, issues permits and inspects construction inside the village under Palatine’s home-rule code. A transit-oriented downtown drives mixed-use and multi-family work, alongside a stable base of established residential neighbourhoods. Neighbouring villages and unincorporated Cook County are separate authorities, so confirm the parcel first.
The statewide Illinois energy, plumbing and accessibility codes apply on top of the village code, with plumbing tied to a state-licensed plumber.
Permit types
Residential permits
Residential work spans established neighbourhoods, townhomes, infill and renovations. Re-roofs, decks, solar and EV chargers need permits, plumbing is tied to a state-licensed plumber, and contractors must hold current Village of Palatine registration.
How Illinois contractor credentials work
Illinois splits contractor credentials between the state and the local jurisdiction. The state licenses plumbers through the Department of Public Health and roofing contractors through the Department of Financial and Professional Regulation. General contractors and electricians, by contrast, are licensed or registered locally — many municipalities and counties require contractors to register before they can pull a permit.
In Illinois the credential question has a state half and a local half. A plumber carries a state licence and a roofer a state registration, but the general contractor and the electrician are typically registered with the municipality or county that issues the permit. Confirm both halves before filing, since a missing local registration stops a permit as surely as a missing state licence.
Commercial permits
Commercial and mixed-use work runs from downtown transit-oriented development to retail and offices, all under the village’s home-rule code, the statewide energy and accessibility requirements, and village contractor registration, with plumbing tied to state-licensed plumbers.
Registration, trade licences and design professionals
Practically, three credential layers appear on Illinois projects: local contractor registration with the building division; state licences for plumbing and roofing; and, on commercial and larger residential work, drawings from an Illinois-licensed design professional. Confirm what the building division requires for the specific building before filing.
Palatine permit costs and fees
Budget the village building permit and plan-review fees, separate trade permits, and village contractor registration. Palatine publishes its own valuation-based schedule with the code locked to your application year.
| Fee component | How it works |
|---|---|
| Building permit | Based on project valuation or square footage; set by the local schedule |
| Plan review | A percentage of the permit fee or a flat charge, at submittal |
| Trade permits | Separate electrical, plumbing and mechanical fees |
| Contractor registration | Local registration fees for the trades pulling permits |
| Zoning and impact | Local zoning review, and impact or capital fees in growth areas |
| Re-inspections and revisions | Additional fees for failed inspections, revisions and expired permits |
Illinois sets one useful certainty in law: once a permit is issued, the code requirements in effect on January 1 of the year you applied govern for the life of that permit, so a mid-project code change will not move the target. Fee schedules, though, are local and change, so a figure from a neighbouring town is not reliable — ask the building division for the schedule in force on your filing date.
Need a real number for a specific Palatine project? Send us the scope, address and valuation and we will identify the authority having jurisdiction, the code edition in force and the fee categories that will apply.
Trade permits and who may pull them
Trade permits are separate from the building permit and, on projects that require one, generally cannot be issued until the building permit is in place. Plumbing is the clearest statewide case: it follows the Illinois Plumbing Code and must be performed under a state-licensed plumber, wherever the project sits. Electrical work follows the locally adopted electrical code and is tied to a locally licensed or registered electrician.
Plumbing is the one trade Illinois runs uniformly statewide. The Illinois Plumbing Code and plumber licensing come from the Department of Public Health and apply in every jurisdiction, so a plumbing permit is tied to a state-licensed plumber whether the job is in Chicago or an unincorporated county. Electrical, by contrast, follows the local code and local licensing — confirm both.
- Electrical work follows the locally adopted code and a locally licensed or registered electrician.
- Plumbing work follows the statewide Illinois Plumbing Code and a state-licensed plumber.
- Mechanical work follows the adopted mechanical and energy codes; the contractor registers locally.
Permit required
- Service installations, panel upgrades, new circuits, solar PV and EV chargers
- New plumbing, repipes, water heater change-outs, fixtures, backflow and gas piping
- HVAC installation and change-out, ductwork, venting and commercial kitchen exhaust
- Sprinkler, standpipe and fire alarm work on commercial and multi-family structures
Typically exempt
- Replacing a fixture, switch, receptacle or light with no alteration to wiring or piping
- Clearing a stoppage without replacing or rearranging concealed piping
- Filter, thermostat and routine component service
- Like-for-like appliance repair that does not alter the connection
How to apply for a Palatine building permit
Schaumburg, Arlington Heights and unincorporated Cook are separate authorities.
Village registration is required for permit-pulling trades.
Plumbing and roofing are state-licensed on top of village registration.
Downtown multi-family work raises life-safety review.
The home-rule code carries its own amendments.
Confirm the sets and forms the village needs.
Review, corrections and what actually causes delay
In Illinois, the first cause of delay is uncertainty over jurisdiction and the applicable code edition — filing under the wrong amendments, or with the county when a municipality should have it. After that come missing local contractor registrations, a plumbing scope not tied to a state-licensed plumber, energy-code documentation, and a submittal that did not match what the building division requires. Build the review time into the schedule and confirm the checklist before filing.
Approvals do not stay live indefinitely. An Illinois building permit carries a validity period and can expire if work does not start or stalls. The code that applies is locked to the year you applied, but the permit itself still lapses — on phased or financed work, confirm the expiry before it passes.
Inspections in Palatine
Where a permit is required, standard checkpoints include footing and foundation, framing, rough-in electrical, plumbing and mechanical, insulation and energy, fire systems on commercial work, and final, with a certificate of occupancy before use. Downtown mixed-use work adds life-safety and occupancy verification.
Illinois is tightening inspector qualifications: from January 1, 2027, those who perform building inspections must hold International Code Council certification, with a grace period after hire. Confirm the notice the building division needs and schedule around its inspection windows.
Do not cover work before the required inspection has been approved. Keep the issued permit, the approved plans, product listings, energy documentation and your correction responses available on site.
Palatine permit search and official resources
Permit records in Illinois sit with the local authority that issued them. Where the Palatine building division is the authority for the Village of Palatine limits, it holds the building permit, the inspection history and the certificate of occupancy. If you are buying, refinancing or renovating, confirm that past work was permitted rather than assuming it was — and confirm the code edition that was in force.
Confirm the authority having jurisdiction and the code edition first. Illinois’s local-adoption structure — with the statewide baseline now under it — means the applicable code and amendments vary by parcel. Confirm current requirements, fees and review turnaround for your filing date.
These are the primary sources behind this guide. Codes, fee schedules and procedures change — confirm the position for your filing date.
- Village of Palatine, Illinois
- Illinois Capital Development Board (statewide codes)
- Illinois Plumbing Code (IDPH)
- Illinois DFPR (roofing and professional licensing)
- Illinois Office of the State Fire Marshal
Frequently asked questions
Where do I get a Palatine building permit?
From the Village of Palatine building division, which issues permits under the home-rule code for work inside the village.
Is Palatine’s code its own?
Yes. As a home-rule village, Palatine adopts and amends its own building code; the statewide Illinois codes apply on top.
Is downtown mixed-use work reviewed differently?
Often. Transit-oriented multi-family and mixed-use projects carry life-safety and occupancy review; confirm with the building division early.
Is plumbing handled locally?
No. Plumbing follows the statewide Illinois Plumbing Code and a state-licensed plumber, in Palatine as everywhere in Illinois.
Do I register with the village or the county?
With the Village of Palatine for village work; unincorporated parcels file with Cook County.
How do I run a Palatine permit search?
The village holds permit and inspection records for work inside the village.
Simplify Palatine permitting with Alliance Permitting
Palatine runs a home-rule building division with a transit-oriented downtown, so the questions are jurisdiction, life-safety review on mixed-use work, and village registration. Getting those right keeps a northwest-suburb project moving.
Trusted by leading builders, developers, and national contractors — 22 years of filing in the jurisdictions we write about.
Contractors and builders choose Alliance for Palatine because the work is done by people who have stood at the counter:
- We confirm village-versus-neighbour jurisdiction from the parcel.
- We register the trades with the Village of Palatine.
- We coordinate life-safety review on mixed-use work.
- We assemble the plan set to Palatine’s home-rule code.
- We confirm state plumbing and roofing licences and track the review.
Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Palatine sooner?
Let Alliance prepare, file, and track your Palatine permits while your crew stays on the job.
More Illinois permitting guides
This guide is provided by Alliance Permitting for general information about Palatine permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.