Orland Park is a southwest-suburban retail hub of about fifty-nine thousand residents in Cook County, a regional shopping destination anchored by a large mall and surrounding centres. Building permits are issued by the village’s Development Services division under the village’s home-rule code.
This guide covers Development Services, the home-rule code, the retail base, and how the statewide layers and registration work.
This guide covers work inside the Village of Orland Park limits. Neighbouring municipalities and unincorporated Cook County are separate authorities.
Orland Park pairs a home-rule Development Services division with a regional retail base, so commercial tenant and centre work runs heavy alongside residential. The village issues permits under its own code, with life-safety review on large retail occupancies. Confirm the parcel is inside Orland Park rather than a neighbouring municipality or unincorporated Cook.
What requires a building permit in Orland Park?
Illinois assigns building-code authority to local government, so for years different towns ran on different codes — and some had none at all. That changed with Public Act 103-0510, effective January 1, 2025, which requires a statewide baseline through the Capital Development Board: a jurisdiction that has not adopted its own building code must now follow the Board’s adopted International Building, Existing Building and Residential Codes. So the first question in Orland Park is which local code and amendments apply — or the state baseline where none were adopted — and whether the parcel is municipal or in the unincorporated county.
Permit required
- New commercial, multi-family and residential construction, additions and change of occupancy
- Structural alterations, load-bearing changes, foundations, decks and retaining walls
- Electrical work — services, panels, circuits, solar and EV charging — under the adopted electrical code
- Plumbing under the statewide Illinois Plumbing Code, tied to a licensed plumber
- Mechanical and HVAC change-outs, and work affecting the energy envelope
- Re-roofing above the exempt scope, pools, signs, and demolition
Often exempt
- Minor repairs and maintenance replacing materials in kind
- Small accessory structures below the local threshold, where zoning allows
- Painting, flooring, cabinetry and other finish work
- Like-for-like fixture or appliance swaps with no alteration to wiring or piping
Because the code edition and its amendments are set locally, the exempt list and thresholds differ from one jurisdiction to the next — a project waved through in one town needs a full permit set in the next. An exemption from a building permit is never an exemption from zoning, the statewide energy or plumbing codes, or an electrical or plumbing permit. Confirm scope with Development Services before work starts.
The statewide layers that apply everywhere
Three Illinois codes apply statewide regardless of what a jurisdiction has adopted: the Illinois Energy Conservation Code, which you must meet even where a town does not actively enforce it; the Illinois Plumbing Code, owned and enforced by the Department of Public Health, which also licenses plumbers; and the Illinois Accessibility Code, which carries the force of a building code. In Orland Park, Development Services administers the village’s home-rule building code across a regional retail base; the statewide Illinois codes apply on top.
Who handles permitting in Orland Park?
The Development Services division handles plan review, permit issuance and inspections inside the village under the home-rule code.
| Detail | Information |
|---|---|
| Authority | Village of Orland Park Development Services |
| County | Cook |
| Serves | Work inside the Village of Orland Park limits |
| Home rule | Village sets and amends its own code |
| Base | Regional retail and shopping centres |
| Code | Orland Park home-rule building code, plus statewide Illinois codes |
| Plumbing | Statewide Illinois Plumbing Code and state-licensed plumbers |
| Registration | Village contractor registration for permit-pulling trades |
Development Services reviews plans, issues permits and inspects construction inside the village under Orland Park’s home-rule code. A large mall and surrounding retail centres drive tenant build-out and life-safety review, alongside a substantial residential base. Neighbouring municipalities and unincorporated Cook County are separate authorities, so confirm the parcel first.
The statewide Illinois energy, plumbing and accessibility codes apply on top of the village code, with plumbing tied to a state-licensed plumber.
Permit types
Residential permits
Residential work spans subdivisions, townhomes, infill and renovations. Re-roofs, decks, solar and EV chargers need permits, plumbing is tied to a state-licensed plumber, and contractors must hold current Village of Orland Park registration.
How Illinois contractor credentials work
Illinois splits contractor credentials between the state and the local jurisdiction. The state licenses plumbers through the Department of Public Health and roofing contractors through the Department of Financial and Professional Regulation. General contractors and electricians, by contrast, are licensed or registered locally — many municipalities and counties require contractors to register before they can pull a permit.
In Illinois the credential question has a state half and a local half. A plumber carries a state licence and a roofer a state registration, but the general contractor and the electrician are typically registered with the municipality or county that issues the permit. Confirm both halves before filing, since a missing local registration stops a permit as surely as a missing state licence.
Commercial permits
Commercial work runs from mall and big-box tenant build-out to retail centres, offices and restaurants, all under the village’s home-rule code, the statewide energy and accessibility requirements, life-safety review, and village contractor registration, with plumbing tied to state-licensed plumbers.
Registration, trade licences and design professionals
Practically, three credential layers appear on Illinois projects: local contractor registration with Development Services; state licences for plumbing and roofing; and, on commercial and larger residential work, drawings from an Illinois-licensed design professional. Confirm what Development Services requires for the specific building before filing.
Orland Park permit costs and fees
Budget the village building permit and plan-review fees, separate trade permits, and village contractor registration. Orland Park publishes its own valuation-based schedule with the code locked to your application year.
| Fee component | How it works |
|---|---|
| Building permit | Based on project valuation or square footage; set by the local schedule |
| Plan review | A percentage of the permit fee or a flat charge, at submittal |
| Trade permits | Separate electrical, plumbing and mechanical fees |
| Contractor registration | Local registration fees for the trades pulling permits |
| Zoning and impact | Local zoning review, and impact or capital fees in growth areas |
| Re-inspections and revisions | Additional fees for failed inspections, revisions and expired permits |
Illinois sets one useful certainty in law: once a permit is issued, the code requirements in effect on January 1 of the year you applied govern for the life of that permit, so a mid-project code change will not move the target. Fee schedules, though, are local and change, so a figure from a neighbouring town is not reliable — ask Development Services for the schedule in force on your filing date.
Need a real number for a specific Orland Park project? Send us the scope, address and valuation and we will identify the authority having jurisdiction, the code edition in force and the fee categories that will apply.
Trade permits and who may pull them
Trade permits are separate from the building permit and, on projects that require one, generally cannot be issued until the building permit is in place. Plumbing is the clearest statewide case: it follows the Illinois Plumbing Code and must be performed under a state-licensed plumber, wherever the project sits. Electrical work follows the locally adopted electrical code and is tied to a locally licensed or registered electrician.
Plumbing is the one trade Illinois runs uniformly statewide. The Illinois Plumbing Code and plumber licensing come from the Department of Public Health and apply in every jurisdiction, so a plumbing permit is tied to a state-licensed plumber whether the job is in Chicago or an unincorporated county. Electrical, by contrast, follows the local code and local licensing — confirm both.
- Electrical work follows the locally adopted code and a locally licensed or registered electrician.
- Plumbing work follows the statewide Illinois Plumbing Code and a state-licensed plumber.
- Mechanical work follows the adopted mechanical and energy codes; the contractor registers locally.
Permit required
- Service installations, panel upgrades, new circuits, solar PV and EV chargers
- New plumbing, repipes, water heater change-outs, fixtures, backflow and gas piping
- HVAC installation and change-out, ductwork, venting and commercial kitchen exhaust
- Sprinkler, standpipe and fire alarm work on commercial and multi-family structures
Typically exempt
- Replacing a fixture, switch, receptacle or light with no alteration to wiring or piping
- Clearing a stoppage without replacing or rearranging concealed piping
- Filter, thermostat and routine component service
- Like-for-like appliance repair that does not alter the connection
How to apply for a Orland Park building permit
Neighbouring municipalities and unincorporated Cook are separate authorities.
Village registration is required for permit-pulling trades.
Malls and centres raise life-safety review.
Plumbing and roofing are state-licensed on top of village registration.
The home-rule code carries its own amendments.
Confirm the sets and forms the village needs.
Review, corrections and what actually causes delay
In Illinois, the first cause of delay is uncertainty over jurisdiction and the applicable code edition — filing under the wrong amendments, or with the county when a municipality should have it. After that come missing local contractor registrations, a plumbing scope not tied to a state-licensed plumber, energy-code documentation, and a submittal that did not match what Development Services requires. Build the review time into the schedule and confirm the checklist before filing.
Approvals do not stay live indefinitely. An Illinois building permit carries a validity period and can expire if work does not start or stalls. The code that applies is locked to the year you applied, but the permit itself still lapses — on phased or financed work, confirm the expiry before it passes.
Inspections in Orland Park
Where a permit is required, standard checkpoints include footing and foundation, framing, rough-in electrical, plumbing and mechanical, insulation and energy, fire systems on commercial work, and final, with a certificate of occupancy before use. Large retail occupancies add life-safety and accessibility verification.
Illinois is tightening inspector qualifications: from January 1, 2027, those who perform building inspections must hold International Code Council certification, with a grace period after hire. Confirm the notice Development Services needs and schedule around its inspection windows.
Do not cover work before the required inspection has been approved. Keep the issued permit, the approved plans, product listings, energy documentation and your correction responses available on site.
Orland Park permit search and official resources
Permit records in Illinois sit with the local authority that issued them. Where Orland Park Development Services is the authority for the Village of Orland Park limits, it holds the building permit, the inspection history and the certificate of occupancy. If you are buying, refinancing or renovating, confirm that past work was permitted rather than assuming it was — and confirm the code edition that was in force.
Confirm the authority having jurisdiction and the code edition first. Illinois’s local-adoption structure — with the statewide baseline now under it — means the applicable code and amendments vary by parcel. Confirm current requirements, fees and review turnaround for your filing date.
These are the primary sources behind this guide. Codes, fee schedules and procedures change — confirm the position for your filing date.
- Village of Orland Park, Illinois
- Illinois Capital Development Board (statewide codes)
- Illinois Plumbing Code (IDPH)
- Illinois DFPR (roofing and professional licensing)
- Illinois Office of the State Fire Marshal
Frequently asked questions
Where do I get an Orland Park building permit?
From the Village of Orland Park Development Services division, which issues permits under the home-rule code for work inside the village.
Is there heavy retail review?
Yes. The regional retail base brings substantial life-safety and accessibility review on large occupancies.
Is Orland Park’s code its own?
Yes. As a home-rule village, Orland Park adopts and amends its own building code; the statewide Illinois codes apply on top.
Is plumbing handled locally?
No. Plumbing follows the statewide Illinois Plumbing Code and a state-licensed plumber, in Orland Park as everywhere in Illinois.
Do I register with the village or the county?
With the Village of Orland Park for village work; unincorporated parcels file with Cook County.
How do I run an Orland Park permit search?
The village holds permit and inspection records for work inside the village.
Simplify Orland Park permitting with Alliance Permitting
Orland Park pairs a home-rule Development Services division with a regional retail base, so the questions are jurisdiction, life-safety review on large occupancies, and village registration. Getting those right keeps a southwest-suburb project moving.
Trusted by leading builders, developers, and national contractors — 22 years of filing in the jurisdictions we write about.
Contractors and builders choose Alliance for Orland Park because the work is done by people who have stood at the counter:
- We confirm village-versus-neighbour jurisdiction from the parcel.
- We register the trades with the Village of Orland Park.
- We coordinate life-safety review on large retail.
- We assemble the plan set to Orland Park’s home-rule code.
- We confirm state plumbing and roofing licences and track the review.
Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Orland Park sooner?
Let Alliance prepare, file, and track your Orland Park permits while your crew stays on the job.
More Illinois permitting guides
This guide is provided by Alliance Permitting for general information about Orland Park permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.