Kankakee County sits at the southern edge of the Chicago metro at about one hundred six thousand residents, along the Kankakee River and anchored by Kankakee, Bradley and Bourbonnais. Its Planning Department handles unincorporated permitting and zoning, while the cities and villages run their own departments.
This guide covers the county’s unincorporated-area role, the river and agricultural context, the statewide layers, and where city work goes instead.
This guide covers unincorporated Kankakee County. Kankakee, Bradley, Bourbonnais and the other municipalities each run their own permitting.
Kankakee County pairs the southern metro edge with the Kankakee River and productive farmland, so the first question is whether the parcel is unincorporated county or inside a municipality. The Planning Department is the authority for unincorporated areas, where floodplain and land-use review often sit ahead of the building permit. Confirm the parcel before design.
What requires a building permit in Kankakee County?
Illinois assigns building-code authority to local government, so for years different towns ran on different codes — and some had none at all. That changed with Public Act 103-0510, effective January 1, 2025, which requires a statewide baseline through the Capital Development Board: a jurisdiction that has not adopted its own building code must now follow the Board’s adopted International Building, Existing Building and Residential Codes. So the first question in Kankakee County is which local code and amendments apply — or the state baseline where none were adopted — and whether the parcel is municipal or in the unincorporated county.
Permit required
- New commercial, multi-family and residential construction, additions and change of occupancy
- Structural alterations, load-bearing changes, foundations, decks and retaining walls
- Electrical work — services, panels, circuits, solar and EV charging — under the adopted electrical code
- Plumbing under the statewide Illinois Plumbing Code, tied to a licensed plumber
- Mechanical and HVAC change-outs, and work affecting the energy envelope
- Re-roofing above the exempt scope, pools, signs, and demolition
Often exempt
- Minor repairs and maintenance replacing materials in kind
- Small accessory structures below the local threshold, where zoning allows
- Painting, flooring, cabinetry and other finish work
- Like-for-like fixture or appliance swaps with no alteration to wiring or piping
Because the code edition and its amendments are set locally, the exempt list and thresholds differ from one jurisdiction to the next — a project waved through in one town needs a full permit set in the next. An exemption from a building permit is never an exemption from zoning, the statewide energy or plumbing codes, or an electrical or plumbing permit. Confirm scope with the Planning Department before work starts.
The statewide layers that apply everywhere
Three Illinois codes apply statewide regardless of what a jurisdiction has adopted: the Illinois Energy Conservation Code, which you must meet even where a town does not actively enforce it; the Illinois Plumbing Code, owned and enforced by the Department of Public Health, which also licenses plumbers; and the Illinois Accessibility Code, which carries the force of a building code. In unincorporated Kankakee County, the Planning Department administers the county’s adopted building code alongside zoning, floodplain and land-use review along the Kankakee River; the statewide Illinois codes apply on top.
Who handles permitting in Kankakee County?
The Planning Department handles permitting and inspections for unincorporated Kankakee County; the municipalities handle their own.
| Detail | Information |
|---|---|
| Authority | Kankakee County Planning Department |
| Seat | Kankakee |
| Serves | Unincorporated Kankakee County |
| Region | Kankakee River, farmland and industry |
| Code | County-adopted building code, plus statewide Illinois codes |
| Plumbing | Statewide Illinois Plumbing Code and state-licensed plumbers |
| Registration | Local contractor registration for permit-pulling trades |
| Municipal work | Handled by the city, not the county |
The Planning Department is the authority for unincorporated Kankakee County, combining building permitting with zoning, floodplain and land-use review. The Kankakee River brings floodplain considerations, and productive farmland surrounds the metro core, where land use sits ahead of the building permit. The cities and villages run their own departments, so confirm the jurisdiction from the parcel first.
The county administers its adopted building code; the statewide Illinois energy, plumbing and accessibility codes apply on top, with plumbing tied to a state-licensed plumber.
Permit types
Residential permits
Unincorporated residential work spans river-adjacent properties, rural subdivisions and farmland parcels. Re-roofs, decks, solar and EV chargers need permits, plumbing is tied to a state-licensed plumber, and contractors register locally before pulling a permit.
How Illinois contractor credentials work
Illinois splits contractor credentials between the state and the local jurisdiction. The state licenses plumbers through the Department of Public Health and roofing contractors through the Department of Financial and Professional Regulation. General contractors and electricians, by contrast, are licensed or registered locally — many municipalities and counties require contractors to register before they can pull a permit.
In Illinois the credential question has a state half and a local half. A plumber carries a state licence and a roofer a state registration, but the general contractor and the electrician are typically registered with the municipality or county that issues the permit. Confirm both halves before filing, since a missing local registration stops a permit as surely as a missing state licence.
Commercial permits
Commercial, industrial and agricultural work in unincorporated areas is a county matter, applying the adopted code with the statewide energy and accessibility requirements. All of it requires locally registered contractors and state-licensed plumbing.
Registration, trade licences and design professionals
Practically, three credential layers appear on Illinois projects: local contractor registration with the Planning Department; state licences for plumbing and roofing; and, on commercial and larger residential work, drawings from an Illinois-licensed design professional. Confirm what the Planning Department requires for the specific building before filing.
Kankakee County permit costs and fees
Budget the county building permit and plan-review fees, separate trade permits, local contractor registration, and any floodplain or land-use review. Kankakee County publishes a valuation-based schedule with the code locked to your application year.
| Fee component | How it works |
|---|---|
| Building permit | Based on project valuation or square footage; set by the local schedule |
| Plan review | A percentage of the permit fee or a flat charge, at submittal |
| Trade permits | Separate electrical, plumbing and mechanical fees |
| Contractor registration | Local registration fees for the trades pulling permits |
| Zoning and impact | Local zoning review, and impact or capital fees in growth areas |
| Re-inspections and revisions | Additional fees for failed inspections, revisions and expired permits |
Illinois sets one useful certainty in law: once a permit is issued, the code requirements in effect on January 1 of the year you applied govern for the life of that permit, so a mid-project code change will not move the target. Fee schedules, though, are local and change, so a figure from a neighbouring town is not reliable — ask the Planning Department for the schedule in force on your filing date.
Need a real number for a specific Kankakee County project? Send us the scope, address and valuation and we will identify the authority having jurisdiction, the code edition in force and the fee categories that will apply.
Trade permits and who may pull them
Trade permits are separate from the building permit and, on projects that require one, generally cannot be issued until the building permit is in place. Plumbing is the clearest statewide case: it follows the Illinois Plumbing Code and must be performed under a state-licensed plumber, wherever the project sits. Electrical work follows the locally adopted electrical code and is tied to a locally licensed or registered electrician.
Plumbing is the one trade Illinois runs uniformly statewide. The Illinois Plumbing Code and plumber licensing come from the Department of Public Health and apply in every jurisdiction, so a plumbing permit is tied to a state-licensed plumber whether the job is in Chicago or an unincorporated county. Electrical, by contrast, follows the local code and local licensing — confirm both.
- Electrical work follows the locally adopted code and a locally licensed or registered electrician.
- Plumbing work follows the statewide Illinois Plumbing Code and a state-licensed plumber.
- Mechanical work follows the adopted mechanical and energy codes; the contractor registers locally.
Permit required
- Service installations, panel upgrades, new circuits, solar PV and EV chargers
- New plumbing, repipes, water heater change-outs, fixtures, backflow and gas piping
- HVAC installation and change-out, ductwork, venting and commercial kitchen exhaust
- Sprinkler, standpipe and fire alarm work on commercial and multi-family structures
Typically exempt
- Replacing a fixture, switch, receptacle or light with no alteration to wiring or piping
- Clearing a stoppage without replacing or rearranging concealed piping
- Filter, thermostat and routine component service
- Like-for-like appliance repair that does not alter the connection
How to apply for a Kankakee County building permit
Kankakee, Bradley and Bourbonnais file with their own counters.
River-adjacent parcels can raise floodplain review.
The county sets the edition and amendments for unincorporated areas.
Permit-pulling trades register with the county.
Plumbing and roofing are state-licensed; other trades register locally.
Confirm the sets and forms the Planning Department needs.
Review, corrections and what actually causes delay
In Illinois, the first cause of delay is uncertainty over jurisdiction and the applicable code edition — filing under the wrong amendments, or with the county when a municipality should have it. After that come missing local contractor registrations, a plumbing scope not tied to a state-licensed plumber, energy-code documentation, and a submittal that did not match what the Planning Department requires. Build the review time into the schedule and confirm the checklist before filing.
Approvals do not stay live indefinitely. An Illinois building permit carries a validity period and can expire if work does not start or stalls. The code that applies is locked to the year you applied, but the permit itself still lapses — on phased or financed work, confirm the expiry before it passes.
Inspections in Kankakee County
Where a permit is required, standard checkpoints include footing and foundation, framing, rough-in electrical, plumbing and mechanical, insulation and energy, fire systems on commercial work, and final, with a certificate of occupancy before use. River-adjacent and farmland parcels add floodplain, land-use and septic verification.
Illinois is tightening inspector qualifications: from January 1, 2027, those who perform building inspections must hold International Code Council certification, with a grace period after hire. Confirm the notice the Planning Department needs and schedule around its inspection windows.
Do not cover work before the required inspection has been approved. Keep the issued permit, the approved plans, product listings, energy documentation and your correction responses available on site.
Kankakee County permit search and official resources
Permit records in Illinois sit with the local authority that issued them. Where the Kankakee County Planning Department is the authority for unincorporated Kankakee County, it holds the building permit, the inspection history and the certificate of occupancy. If you are buying, refinancing or renovating, confirm that past work was permitted rather than assuming it was — and confirm the code edition that was in force.
Confirm the authority having jurisdiction and the code edition first. Illinois’s local-adoption structure — with the statewide baseline now under it — means the applicable code and amendments vary by parcel. Confirm current requirements, fees and review turnaround for your filing date.
These are the primary sources behind this guide. Codes, fee schedules and procedures change — confirm the position for your filing date.
- Kankakee County, Illinois
- Illinois Capital Development Board (statewide codes)
- Illinois Plumbing Code (IDPH)
- Illinois DFPR (roofing and professional licensing)
- Illinois Office of the State Fire Marshal
Frequently asked questions
Where do I get a Kankakee County building permit?
From the Planning Department, for unincorporated areas, based in Kankakee; Kankakee, Bradley, Bourbonnais and the other municipalities run their own departments.
Do river parcels have extra rules?
Often. Kankakee River floodplain review can apply to river-adjacent parcels; confirm with the Planning Department early.
How do I know if my parcel is unincorporated?
Confirm with the Planning Department; the metro core is incorporated, so many parcels file with a municipality instead.
Is plumbing handled locally?
No. Plumbing follows the statewide Illinois Plumbing Code and a state-licensed plumber, in Kankakee County as everywhere in Illinois.
Do contractors register with the county?
Permit-pulling trades typically register locally with the county; plumbing and roofing are state-licensed.
How do I run a Kankakee County permit search?
The county holds records for unincorporated areas; municipal records sit with each city.
Simplify Kankakee County permitting with Alliance Permitting
Kankakee County pairs the metro edge with a river and farmland, so the questions are jurisdiction, floodplain and the adopted code. Getting those settled up front keeps a south-metro project moving.
Trusted by leading builders, developers, and national contractors — 22 years of filing in the jurisdictions we write about.
Contractors and builders choose Alliance for Kankakee County because the work is done by people who have stood at the counter:
- We confirm whether the parcel is unincorporated or municipal.
- We check Kankakee River floodplain status early.
- We confirm the adopted code edition and amendments.
- We register the trades and confirm state plumbing and roofing licences.
- We assemble the county plan set and track issuance.
Alliance Permitting is a permit documentation and submission company in Illinois. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Kankakee County sooner?
Let Alliance prepare, file, and track your Kankakee County permits while your crew stays on the job.
More Illinois permitting guides
This guide is provided by Alliance Permitting for general information about Kankakee County permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.