Newark is the seat of Licking County, and it is a place where Ohio's certified-department model needs checking rather than assuming. Licking County Building Codes is itself located in Newark, at 675 Price Road, while the city operates its own engineering and administrative functions from the city building on West Main Street. Which department is certified for your project type is the first question to settle.
This guide covers the department and how to reach it, the code edition that actually governs a filing here and when it changed, the statutory conditions on permit issuance that sit outside the building code, what permits cost and who may pull them, and how inspections are booked.
This guide covers work in Newark, Ohio. Confirm whether the city or Licking County holds certification for your project type before filing.
Do not assume the city permits its own limits here — confirm it. In Ohio, enforcement authority comes from Board certification rather than from being a municipality, and certification can be held by a city, a county or a township, and can differ between residential and commercial work. Licking County Building Codes operates from within Newark itself, which makes the question easy to get wrong by assumption. Use the Board's building-department lookup against the specific address, and confirm the scope of that certification covers your project type.
What requires a building permit in Newark?
Under the Ohio Building Code and the Residential Code of Ohio, a permit is required for most construction activity.
Permit required
- New residential and commercial construction, additions, alterations and conversions
- Structural and load-bearing work, foundations, decks, porches, ramps and stairs
- Finishing basements and attics, and any change of occupancy or use
- Electrical service changes, panel work, new circuits, solar and EV charging equipment
- Plumbing alterations, repipes, water heaters, backflow and sewer or gas connections
- HVAC installation and change-out, ductwork and venting; reroofing, siding, windows, pools and signs
Typically exempt
- Painting, wallpapering, tiling, carpeting and cabinet installation
- Minor repairs and finish work replacing materials in kind
- Gutters and downspouts in many jurisdictions
- Small accessory structures below the local size threshold, where zoning allows
Exemptions are narrow and local, and an exemption from a building permit is not an exemption from zoning, setbacks, floodplain rules, utility approval or a fire authority review. Confirm scope with the department before work starts rather than after.
Which code edition applies
Whichever certified department holds authority enforces the statewide Ohio codes, so the technical standard is the same either way. What changes with the answer is the fee schedule, the submittal process, inspection scheduling and any stricter local requirements — which is precisely why the certification question needs settling before a package is assembled rather than after.
Ohio sets its construction code statewide through the Ohio Board of Building Standards, which sits inside the Department of Commerce's Division of Industrial Compliance. The state has regulated construction this way since 1911 — one of the earliest statewide building codes in the country — and the arrangement it has arrived at is unlike any other state's.
Ohio's defining feature is that enforcement authority is certified, not inherent. The Board certifies municipal, county and township building departments to enforce the state code, and only a certified department — or the state — may approve plans and issue permits. A city does not get to enforce the building code because it is a city. It gets to enforce because the Board has certified its department to do so, for the categories of work its certification covers. That single fact drives almost everything else about permitting in Newark.
The practical consequence is that the first question on any Ohio project is not what the code requires — the code is the same statewide — but which department is certified to issue your permit. That answer does not follow reliably from the address, the municipality or the county, and getting it wrong wastes a full cycle.
Two codes, and the line between them
Ohio splits its building code in two, and which one governs your project decides the review path, the requirements and often the department.
- Ohio Building Code (OBC) — commercial, industrial and public buildings.
- Residential Code of Ohio (RCO) — one-, two- and three-family dwellings.
Effective 1 March 2024, the OBC, the Ohio Mechanical Code and the Ohio Plumbing Code are based on the 2021 International Codes with Ohio amendments. The 2023 National Electrical Code applies, and energy compliance runs through the 2021 IECC and ASHRAE 90.1-2019. The Ohio Plumbing Code is Ohio's adaptation of the 2021 International Plumbing Code.
One further rule shapes what local government can do with the code. A certified department may adopt requirements stricter than the state minimum, but it cannot fall below it. That is a one-directional freedom, and it differs from the arrangement in states that either forbid local variation entirely or leave adoption optional. In Ohio the state code is a floor, local government may build on top of it, and the practical effect is that the technical baseline is portable across Ohio while the local layer is not.
Who handles permitting in Newark?
Permits are issued by whichever certified department holds authority over the address for the relevant class of work. Zoning is administered by the city for parcels inside the city limits and is generally required before a building permit will issue.
| Detail | Information |
|---|---|
| Authority | The BBS-certified department for the address and class of work |
| County department | Licking County Building Codes, 675 Price Road, Newark · 740-349-6671 · Monday to Friday 7:00am to 4:00pm |
| City offices | Newark city building, 40 West Main Street · engineering 740-670-7720 |
| First step | Confirm certification against the address before assembling a package |
| Market context | County-wide investment and associated growth |
| Confirm the department | Use the BBS building-department lookup before filing |
| Code | Ohio BBS — 2021 I-Codes with Ohio amendments effective 1 March 2024, 2023 NEC |
| Contractor credentials | OCILB state licence on commercial trades; local registration for everything else |
The county building office keeps an early counter, opening at 7:00am and closing at 4:00pm, which suits site teams wanting counter business done before the working day begins but removes the late-afternoon option. Plan around both ends of that window.
One point applies across every Ohio jurisdiction and is worth confirming here rather than assuming. A certified department may adopt requirements stricter than the state minimum but cannot fall below it, so the technical baseline you design to is portable across Ohio while any local additions are not. Ask the issuing department whether it has adopted anything above the state minimum affecting your project type, because that question is rarely answered on a website and it is the one local variable capable of changing the drawings rather than merely the paperwork.
Where no certified local department exists, the fallback is asymmetric — and the asymmetry is the part people miss. The Division of Industrial Compliance operates Ohio Building Code Compliance regional offices that perform commercial plan review and inspection where no certified department serves the area. But residential code enforcement is carried out only by certified local departments. The state does not backfill it.
So in an area without a certified residential department, a commercial project still has a clear path through the state, while a house does not have the same state-level route. That is a genuinely unusual arrangement, and it is why confirming the certification position for your specific address and your specific project type is the first task rather than an administrative afterthought.
The Board publishes a building-department lookup that maps an address to the department with authority over it. On an Ohio project that tool is the single most useful thing you can consult before preparing anything, and it settles in a minute a question that otherwise produces a wasted submittal.
What the state decides, and what Newark decides
Ohio divides this more sharply than most states, and knowing the split saves asking the wrong office and getting a confident wrong answer.
The state decides the technical standard and who may enforce it. The model codes, the edition, the Ohio amendments and the referenced standards all come from the Board of Building Standards. So does the certification that gives a department authority in the first place, and the scope that certification covers. The state also performs commercial plan review where no certified department serves, and licenses the five commercial trades through the licensing board.
Newark decides nearly everything else — the fee schedule, the submittal requirements, review turnaround, inspection scheduling and sequencing, zoning and land use, any requirements adopted stricter than the state minimum, and local contractor registration. Residential contractor regulation sits here too, since the state does not license general contractors at all.
So the useful question on an Ohio project is rarely what the code requires — that is settled statewide and portable. It is which certified department has authority over this address for this class of work, what it needs from you, and in what order.
Zoning is a separate approval, and often a separate office
A building permit in Ohio confirms code compliance. It does not confirm that the use, the density, the setbacks, the parking or the site layout are permitted — that is zoning, and it is administered separately, frequently by a different office and occasionally by a different level of government from the certified building department. In townships served by a county building department, for instance, the building permit and the zoning approval can come from two entirely different bodies.
Clear zoning first. A certified department will generally not issue a permit until zoning approval is in hand, so a zoning question left open is not a parallel workstream — it is a hold on the permit. Establish with the City of Newark which approvals must be complete before the building application will even be accepted.
Permit types
Residential permits
Residential work spans subdivision and production construction responding to regional employment growth, infill, and renovation across an established stock. Confirm the certification question first, clear zoning early, and confirm current lead times in a market that is moving.
How Ohio permit fees work
Energy compliance and work in existing buildings
Two parts of the Ohio code set generate more correction comments than their page count suggests, and both are worth settling before drawings are developed rather than during review.
The first is energy. Compliance runs through the 2021 International Energy Conservation Code, with ASHRAE 90.1-2019 available as an alternative path on commercial work. The requirement is not merely to be compliant but to document compliance in a form a plans examiner can check — envelope assemblies, fenestration performance, air sealing, duct and pipe insulation, lighting power and equipment efficiency all need showing. A set that meets the standard but is silent about how it meets it will still come back, and on commercial work choosing between the prescriptive and performance paths early avoids reworking the documentation later.
The second is existing buildings, which matter enormously in Ohio because so much of the state's building stock is old. Alteration, repair, addition and change of occupancy each carry their own compliance requirements, and how far a project must go — structurally, for fire and life safety, for accessibility and for energy — depends on which of those categories the work falls into and how extensive it is. That categorisation is a decision to make deliberately with the issuing department at the start. Made late, it is made for you, and usually less favourably than it would have been if raised at the outset.
Fee schedules in Ohio are adopted by each certified department, typically calculated by floor area or valuation, with plan-review fees generally due at submission. One statewide element sits on top: a Board of Building Standards assessment is added to commercial building permit fees and funds the Board itself. Because every certified department publishes its own schedule, a fee figure quoted from a neighbouring city — or from a large city elsewhere in Ohio — tells you nothing reliable about your project. Ask the department that will actually issue your permit.
Commercial permits
Commercial development includes corridor retail and service, medical and office space, distribution, and activity connected to the county's wider investment. Larger projects bring zoning, fire, utility and site engineering approvals alongside the building set.
Credentials: state trades, local everything else
Newark permit costs and fees
Fees are set by whichever certified department issues the permit, generally by floor area or valuation, with plan-review fees due at submission and a statewide Board assessment on commercial permits.
| Fee component | How it works |
|---|---|
| Plan review | By floor area or valuation per the certified city department's schedule, due at submission |
| Building permit | Set by the issuing certified department's adopted fee schedule |
| Trade permits | Separate electrical, plumbing and mechanical fees by device, fixture or unit |
| State BBS assessment | A statewide assessment added to commercial building permit fees |
| Certificate of Occupancy | A separate fee where applicable |
| Work without a permit | Penalties, stop-work orders and, in many jurisdictions, doubled fees |
Fee schedules in Ohio are set by each certified department and revised on each jurisdiction’s own cycle, so a figure quoted from a neighbouring city, an older packet or a national estimator is not a reliable number here. Ask the department for the schedule in force on your filing date, and ask separately about plan review, trade, and any re-inspection or revision charges, which are frequently billed as distinct lines.
Need a real number for a specific Newark project? Send us the scope, address and valuation and we will identify the filing path, the reviews it will trigger and the fee categories that will apply.
Trade permits and who may pull them
Trade permits are generally separate from the building permit and are issued to the licensed installer. Ohio licenses five commercial trades at state level and leaves general contracting and residential work to local registration, so the credential check has a state half and a local half. Confirm both before filing rather than after the first correction notice.
Ohio licenses commercial trades at state level and leaves everything else to local government — including general contracting. This split catches people from states with a single unified contractor board.
- Ohio Construction Industry Licensing Board, within the Division of Industrial Compliance, issues statewide commercial licences in five trades: electrical, HVAC, hydronics, plumbing and refrigeration, under ORC 4740. A valid licence is required before a building or health department will issue a commercial permit in those trades, and licensees carry at least $500,000 in liability coverage.
- There is no statewide general-contractor licence in Ohio. General contracting is not licensed by the state at all.
- Residential contractors are regulated locally. Each city or county sets its own registration and trade requirements, so the answer changes as you cross jurisdictional lines.
- Separately, anyone performing residential home-construction or home-improvement work on contracts over $25,000 must register under the Home Construction Service Suppliers Act, ORC 4722, administered by the Ohio Attorney General rather than by the licensing board.
The practical check before signing a contract is therefore two-part: the state commercial trade licence where the scope requires one, and the local registration wherever the work is being done. Neither substitutes for the other.
Permit required
- Service installations, panel upgrades, new circuits, solar PV and EV chargers
- New plumbing, repipes, water heater change-outs, fixtures, backflow and gas piping
- HVAC installation and change-out, ductwork, venting and commercial kitchen exhaust
- Sprinkler, standpipe and fire alarm work under the OBC fire-protection provisions
Typically exempt
- Replacing a fixture, switch, receptacle or light with no alteration to wiring or piping
- Clearing a stoppage without replacing or rearranging concealed piping
- Filter, thermostat and routine component service
- Appliance repair that does not alter the gas, electrical or venting connection
How to apply for a Newark building permit
Do not assume the city permits its own limits.
Residential and commercial scope can differ.
Regional growth is moving them.
Early business available, late-afternoon not.
Most certified departments will not issue until zoning approval is in hand.
The state half and the local half are separate, and neither substitutes for the other.
Denials, corrections and appeals
Review, corrections and what actually causes delay
Because Ohio's technical code is statewide and stable, correction cycles here tend not to turn on disputed code interpretation. They turn on the surrounding questions: a submittal filed with a department that does not have authority over the address, a project routed to the wrong code because the residential line was drawn at two families instead of three, zoning approval that was never obtained, contractor credentials that do not match the scope, or an approval that lapsed before work commenced.
Ask the issuing department three things before filing: confirm it is the department with authority over the address, confirm whether the OBC or the RCO governs the project, and confirm which approvals must be in hand before the building application will be accepted. Those three answers prevent most of what goes wrong on an Ohio project.
Approved plans do not stay approved indefinitely. Under the OBC administrative provisions, approved construction documents are valid where work commences within 12 months, with one 12-month extension available. On a project that is phased, waiting on financing or held up over a winter, that clock matters. Confirm the position with the issuing department before an approval is allowed to age, because reviving a lapsed approval is more work than extending a live one.
Inspections in Newark
Schedule inspections with whichever certified department issued the permit. Standard checkpoints include foundation, framing, rough-in trades, insulation and energy, and final, with a Certificate of Occupancy required before legal occupancy of new or changed-use space.
Keep records clearly attributed to the issuing authority, particularly on a portfolio spanning both city and county-served parcels, since the two follow different processes and different inspection routing.
Two administrative points close out an Ohio project. First, a Certificate of Occupancy is required before legal occupancy of new or changed-use space — and change of use is the part people forget. Moving a tenant into a space previously used for something else is a change of occupancy even when no construction is involved, and it triggers review against the requirements for the new use. Confirm the position before a lease is signed rather than after.
Second, correction notices should be addressed before a re-inspection is requested. That sounds obvious and is routinely ignored, and in busy departments a re-inspection called on incomplete work costs queue position rather than just a fee. Keep the issued permit, the approved plans, the current revision set and the correction history available on site, so the inspector can see what is current without having to ask.
Do not cover work before the required inspection has been approved. Keep the issued permit, the approved plans, energy documentation, product listings, special-inspection reports and your correction responses available on site.
Newark permit search and official resources
Permit records sit with the department that issued them, which in Ohio makes record research a certification question first. A property may have records with a municipal department, a county department, a township department or the state, depending on who held authority at the time the work was done — and that can have changed if a department gained or gave up certification, or if the property was annexed. If you are buying, refinancing or renovating, ask the City of Newark what it holds for the parcel and whether earlier records may sit elsewhere.
The Board's building-department lookup helps here too: it establishes who has authority today, which is the right starting point even when the history is more complicated.
Confirm two things before you file: the code, and the department. Ohio is on the 2021 International Codes with Ohio amendments effective 1 March 2024, together with the 2023 National Electrical Code — but the department with authority over your address, and the scope of its certification, is the answer that changes from parcel to parcel. Use the Board's building-department lookup, then confirm fees, submittal requirements and review turnaround with that department for your filing date.
These are the primary sources behind this guide. Codes, fee schedules and portal procedures change, and in Ohio a certified department’s own published packet can lag a code change by months — the adopted ordinance governs, not an un-updated handout. Confirm the position for your filing date.
- City of Newark, Ohio
- Ohio Board of Building Standards
- BBS — find the building department for your address
- Ohio Construction Industry Licensing Board
- Ohio Attorney General — home improvement registration (ORC 4722)
Frequently asked questions
Does the city or the county issue my permit?
Confirm it against the Board's building-department lookup. Enforcement authority in Ohio comes from certification rather than from being a municipality, and Licking County Building Codes is itself located in Newark, which makes this easy to get wrong by assumption.
How do I know which department issues my permit?
Use the Board of Building Standards building-department lookup, which maps an address to the department with authority over it. Only a BBS-certified department, or the state, may approve plans and issue permits, and certification does not follow automatically from being a city, county or township.
Does my project fall under the OBC or the RCO?
Commercial, industrial and public buildings follow the Ohio Building Code. One-, two- and three-family dwellings follow the Residential Code of Ohio. Note that Ohio's residential line is drawn at three families, not two, which is unusual and catches designers from other states.
What if no certified department serves the area?
The Division of Industrial Compliance performs commercial plan review and inspection where no certified department serves. Residential code enforcement, however, is carried out only by certified local departments, so the fallback is commercial-only.
Does my general contractor need an Ohio licence?
There is no statewide general-contractor licence in Ohio. The state licenses five commercial trades through the OCILB — electrical, HVAC, hydronics, plumbing and refrigeration — while general contracting and residential work are regulated locally. Contracts over $25,000 for residential home construction or improvement also require registration with the Ohio Attorney General under ORC 4722.
How long is my approval good for?
Approved construction documents are valid where work commences within 12 months, with one 12-month extension available under the OBC administrative provisions. Confirm the position with the issuing department before an approval is allowed to age.
Simplify Newark permitting with Alliance Permitting
Newark is the clearest case in Ohio for checking certification rather than assuming it — the county building office sits inside the city. Settle that question first and the rest follows.
Trusted by leading builders, developers, and national contractors — 22 years of filing in the jurisdictions we write about.
Contractors and builders choose Alliance for Newark because the work is done by people who have stood at the counter:
- We confirm city versus county certification against the address.
- We check the certification covers the project's class of work.
- We confirm current lead times in a fast-moving regional market.
- We clear zoning ahead of the building application.
- We keep records attributed to the correct issuing authority.
Alliance Permitting is a permit documentation and submission company in Ohio. We prepare your paperwork, file it correctly and coordinate with the building department through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Newark sooner?
Let Alliance prepare, file, and track your Newark permits while your crew stays on the job.
More Ohio permitting guides
This guide is provided by Alliance Permitting for general information about Newark permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.