Sacramento County surrounds the state capital and is home to about one point six million residents, with a large unincorporated population outside its seven cities such as Sacramento, Elk Grove and Citrus Heights. The Building Permits and Inspection Division, part of the Community Development Department, is the authority for the unincorporated areas.
This guide covers the Building Permits and Inspection Division’s unincorporated-area role, Title 24 with county amendments, and the floodplain layer common in the Delta and river corridors, and where city work goes instead.
This guide covers unincorporated Sacramento County. The county’s cities each run their own permitting.
The first question in Sacramento County is whether the parcel is unincorporated or inside a city. The Building Permits and Inspection Division is the authority for the unincorporated county; work inside the City of Sacramento or another city files with that city. Much of the region sits in Central Valley and Delta floodplains, so flood-zone review shapes many projects.
What requires a building permit in Sacramento County?
California builds on a single statewide code — the California Building Standards Code, known as Title 24 — adopted on a three-year cycle by the California Building Standards Commission. The 2025 edition took effect on January 1, 2026 and governs statewide. Cities and counties enforce Title 24 and may adopt local amendments, but an amendment must be filed with the state and may only be equal to or more restrictive than the state code, justified by local climatic, geologic or topographic conditions. So the first question in Sacramento County is which authority has jurisdiction — the city on incorporated parcels, the county in unincorporated territory — and what local amendments sit on top of Title 24.
Permit required
- New commercial, multi-family and residential construction, additions and change of occupancy
- Structural alterations, load-bearing changes, foundations, decks and retaining walls
- Electrical work — services, panels, circuits, solar and EV charging — under the California Electrical Code
- Plumbing under the California Plumbing Code, tied to a licensed contractor
- Mechanical and HVAC change-outs, and work affecting the Title 24 energy envelope
- Re-roofing above the exempt scope, pools, signs, and demolition
Often exempt
- Minor repairs and maintenance replacing materials in kind
- Small accessory structures below the local threshold, where zoning allows
- Painting, flooring, cabinetry and other finish work
- Like-for-like fixture or appliance swaps with no alteration to wiring or piping
Local amendments and thresholds differ from one jurisdiction to the next, so an exempt list from a neighbouring city is not reliable — a project waved through in one place needs a full permit set in the next. An exemption from a building permit is never an exemption from zoning, the statewide energy or green-building codes, or an electrical or plumbing permit. Confirm scope with Building Permits and Inspection before work starts.
The statewide layers that apply everywhere
Several parts of Title 24 apply on top of the base building code and routinely catch projects owners assume are exempt: the California Energy Code (Part 6), among the strictest in the nation; CALGreen (Part 11), California’s mandatory statewide green-building code; and the accessibility provisions in Chapters 11A and 11B. Seismic design is built into the code statewide, and in fire-prone areas the wildland-urban-interface rules of Chapter 7A and Cal Fire defensible-space requirements add a further layer. In unincorporated Sacramento County, the Building Permits and Inspection Division administers Title 24 with county amendments, and floodplain and drainage review attach to many parcels in the Delta and river corridors.
Who handles permitting in Sacramento County?
The Building Permits and Inspection Division of the Community Development Department handles permitting and inspections for unincorporated Sacramento County; the cities handle their own.
| Detail | Information |
|---|---|
| Authority | Sacramento County Building Permits and Inspection Division |
| Serves | Unincorporated Sacramento County |
| Phone | 916-875-5296 |
| Portal | Online and counter permitting |
| Code | Title 24 with Sacramento County amendments |
| Floodplain | Flood-zone and drainage review in valley corridors |
| Licensing | State CSLB license; no local registration |
| City work | Handled by the city, not the county |
The Building Permits and Inspection Division is the authority for unincorporated Sacramento County, working through its permit counters and online systems. Because much of the region lies in Central Valley and Delta floodplains, flood-zone and drainage review commonly attach to the building permit.
Confirm the jurisdiction from the parcel first; a project inside the City of Sacramento or another city files with that city’s department under its own code and counter.
Permit types
Residential permits
Unincorporated residential work is permitted and inspected by the county under Title 24 and county amendments. Additions, decks, pools, solar and EV chargers need permits, and floodplain parcels carry elevation and flood-resistant-construction requirements. A CSLB-licensed contractor pulls the trade permits.
How California contractor credentials work
California licenses contractors statewide through the Contractors State License Board, not locally. The CSLB issues three license types — Class A for general engineering, Class B for general building, and the Class C specialty classifications for individual trades — and a contractor must hold the classification that matches the work. A license is required for any project valued at one thousand dollars or more in combined labour and materials, and, in practice, for any work that requires a permit regardless of value.
In California the license lives with the state, not the city. The same CSLB license is recognised in every jurisdiction, so there is no separate local contractor registration to secure before pulling a permit. What the permitting authority does check is that the license number is active and carries the right classification for the scope, along with workers’ compensation coverage. Confirm the classification matches before filing.
Commercial permits
Commercial and multi-family work in unincorporated areas goes through county plan check against the California Building Code, the Energy Code and CALGreen. It requires CSLB-licensed contractors, stamped drawings on most projects, and flood-zone design where the parcel sits in a mapped floodplain.
Licenses, trade classifications and design professionals
Practically, three credential layers appear on California projects: a CSLB license in the correct classification for the contractor pulling the permit; the specialty C-classifications for the electrical, plumbing and mechanical trades; and, on commercial and larger residential work, drawings stamped by a California-licensed architect or engineer. Confirm what Building Permits and Inspection requires for the specific building before filing.
Sacramento County permit costs and fees
Budget the county building permit and plan-check fees, separate trade permits, the state Building Standards and seismic surcharges, and floodplain or drainage review where it applies. The county publishes a valuation-based schedule; confirm it for your filing date.
| Fee component | How it works |
|---|---|
| Building permit | Based on project valuation or square footage; set by the local schedule |
| Plan check | A percentage of the permit fee or a flat charge, at submittal |
| Trade permits | Separate electrical, plumbing and mechanical fees |
| State surcharges | Building Standards and seismic (SMIP) fees collected with the permit |
| Impact and school fees | Development impact and school-district fees in growth areas |
| Re-inspections and revisions | Additional fees for failed inspections, revisions and expired permits |
California layers two uniform state surcharges — the Building Standards Administration fee and the Strong Motion Instrumentation seismic fee — on top of the local charges, so they appear on permits everywhere. The building and plan-check fees themselves are local and change, and California law limits them to the reasonable cost of providing the service, so a figure from a neighbouring city is not reliable — ask Building Permits and Inspection for the schedule in force on your filing date.
Need a real number for a specific Sacramento County project? Send us the scope, address and valuation and we will identify the authority having jurisdiction, the code edition in force and the fee categories that will apply.
Trade permits and who may pull them
Trade permits are separate from the building permit and, on projects that require one, generally cannot be issued until the building permit is in place. Each trade follows its own part of Title 24 — the California Electrical, Plumbing and Mechanical Codes — and is tied to a contractor holding the matching CSLB specialty classification, the same license statewide.
California runs the trades on one statewide license. Electrical work is tied to a C-10 contractor, plumbing to a C-36, and heating and air to a C-20, each licensed by the CSLB rather than the city, so the credential travels with the contractor from one jurisdiction to the next. What changes locally is the permit itself and any local amendments — confirm both with the authority that issues it.
- Electrical work follows the California Electrical Code and a C-10 electrical contractor.
- Plumbing work follows the California Plumbing Code and a C-36 plumbing contractor.
- Mechanical work follows the California Mechanical and Energy codes and a C-20 HVAC contractor.
Permit required
- Service installations, panel upgrades, new circuits, solar PV and EV chargers
- New plumbing, repipes, water heater change-outs, fixtures, backflow and gas piping
- HVAC installation and change-out, ductwork, venting and commercial kitchen exhaust
- Sprinkler, standpipe and fire alarm work on commercial and multi-family structures
Typically exempt
- Replacing a fixture, switch, receptacle or light with no alteration to wiring or piping
- Clearing a stoppage without replacing or rearranging concealed piping
- Filter, thermostat and routine component service
- Like-for-like appliance repair that does not alter the connection
How to apply for a Sacramento County building permit
Only unincorporated parcels file with the county; the cities run their own.
Unincorporated applications run through the county’s online and counter systems.
California licenses contractors statewide; match the classification to the scope.
Delta and river-corridor parcels carry elevation and flood-resistant requirements.
File the plan set and pay the review fees the county posts.
Issue the permit and request inspections through the county.
Review, corrections and what actually causes delay
In California, the first cause of delay is uncertainty over jurisdiction — filing with the county when a city should have it, or missing a local amendment on top of Title 24. After that come Title 24 energy and CALGreen documentation, a CSLB classification that does not match the scope, and, in fire or coastal areas, defensible-space or coastal-zone requirements that were not addressed up front. Build the plan-check time into the schedule and confirm the checklist with Building Permits and Inspection before filing.
Approvals do not stay live indefinitely. A California building permit carries a validity period and can expire if work does not start or stalls between inspections. On phased or financed work, keep the permit active with periodic progress inspections and confirm the expiry window before it passes.
Inspections in Sacramento County
Where a permit is required, standard checkpoints include footing and foundation, framing, rough-in electrical, plumbing and mechanical, insulation and Title 24 energy, CALGreen measures, fire systems on commercial work, and final, with a certificate of occupancy before use. On issuance the county assigns the field inspector and the construction stages that must be inspected.
California inspections are keyed to the code editions in force when the permit issued, so the approved plans and any energy and green-building documentation need to be on site for the inspector to check against. Confirm the notice Building Permits and Inspection needs and schedule around its inspection windows.
Do not cover work before the required inspection has been approved. Keep the issued permit, the approved plans, product listings, Title 24 energy documentation and your correction responses available on site.
Sacramento County permit search and official resources
Permit records in California sit with the local authority that issued them. Where the Sacramento County Building Permits and Inspection Division is the authority for unincorporated Sacramento County, it holds the building permit, the inspection history and the certificate of occupancy. If you are buying, refinancing or renovating, confirm that past work was permitted rather than assuming it was — and confirm the code edition that was in force.
Confirm the authority having jurisdiction and the local amendments first. California enforces one statewide code, Title 24, but each city and county adds its own amendments and fee schedule, so the requirements that apply vary by parcel. Confirm current requirements, fees and review turnaround for your filing date.
These are the primary sources behind this guide. Codes, fee schedules and procedures change — confirm the position for your filing date.
- Sacramento County Building Permits and Inspection
- California Building Standards Commission (Title 24)
- Contractors State License Board (CSLB)
- California Energy Commission (Energy Code)
- California Department of Housing and Community Development
Frequently asked questions
Who issues building permits in unincorporated Sacramento County?
The Building Permits and Inspection Division of the Community Development Department issues permits for unincorporated areas; the county’s cities run their own departments.
How do I know if my parcel is unincorporated?
Confirm with the Building Permits and Inspection Division or the county mapping tools; communities outside the incorporated cities file with the county.
Does my project need floodplain review?
Many parcels in the Central Valley and Delta sit in mapped floodplains with elevation and flood-resistant-construction requirements; confirm before you file.
Do I need a local contractor registration?
No. California licenses contractors statewide through the CSLB; the license must be active and carry the right classification.
Can I apply online?
Yes. The county offers online applications and inspection scheduling alongside its permit counters.
How do I run a Sacramento County permit search?
The Building Permits and Inspection Division holds unincorporated permit and inspection records; city records sit with each city’s department.
Simplify Sacramento County permitting with Alliance Permitting
Unincorporated Sacramento County turns on jurisdiction and floodplain. Clearing the flood-zone and drainage questions before filing is most of the battle across the capital region’s valley corridors.
Trusted by leading builders, developers, and national contractors — 22 years of filing in the jurisdictions we write about.
Contractors and builders choose Alliance for Sacramento County because the work is done by people who have stood at the counter:
- We confirm whether the parcel is unincorporated or inside a city.
- We manage the county application end to end.
- We confirm the CSLB classification matches the scope.
- We clear floodplain and drainage review before filing.
- We submit complete plan sets and track issuance and inspections.
Alliance Permitting is a permit documentation and submission company. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Sacramento County sooner?
Let Alliance prepare, file, and track your Sacramento County permits while your crew stays on the job.
More California permitting guides
This guide is provided by Alliance Permitting for general information about Sacramento County permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.