Citrus Heights is a Sacramento County city of about eighty-seven thousand residents in the northern suburbs, incorporated in 1997 from a long-established unincorporated community. Its Building and Safety Division, at the civic centre on Fountain Square Drive, is the sole building authority inside the city, working closely with the Planning Division and the fire district.
This guide covers the Building and Safety Division, its permit process, the design criteria it publishes, and the review timelines that shape Citrus Heights projects.
This guide covers work inside the City of Citrus Heights limits. Unincorporated Sacramento County and neighbouring cities are separate authorities.
Citrus Heights publishes the numbers you need to design to. The division sets out basic design wind speed by risk category, the exposure category that applies unless a different one can be justified, and the code sections that govern each. It also publishes a list of which project types need a permit, residential and commercial, and an average plan review turnaround for first comments.
What requires a building permit in Citrus Heights?
California builds on a single statewide code — the California Building Standards Code, known as Title 24 — adopted on a three-year cycle by the California Building Standards Commission. The 2025 edition took effect on January 1, 2026 and governs statewide. Cities and counties enforce Title 24 and may adopt local amendments, but an amendment must be filed with the state and may only be equal to or more restrictive than the state code, justified by local climatic, geologic or topographic conditions. So the first question in Citrus Heights is which authority has jurisdiction — the city on incorporated parcels, the county in unincorporated territory — and what local amendments sit on top of Title 24.
Permit required
- New commercial, multi-family and residential construction, additions and change of occupancy
- Structural alterations, load-bearing changes, foundations, decks and retaining walls
- Electrical work — services, panels, circuits, solar and EV charging — under the California Electrical Code
- Plumbing under the California Plumbing Code, tied to a licensed contractor
- Mechanical and HVAC change-outs, and work affecting the Title 24 energy envelope
- Re-roofing above the exempt scope, pools, signs, and demolition
Often exempt
- Minor repairs and maintenance replacing materials in kind
- Small accessory structures below the local threshold, where zoning allows
- Painting, flooring, cabinetry and other finish work
- Like-for-like fixture or appliance swaps with no alteration to wiring or piping
Local amendments and thresholds differ from one jurisdiction to the next, so an exempt list from a neighbouring city is not reliable — a project waved through in one place needs a full permit set in the next. An exemption from a building permit is never an exemption from zoning, the statewide energy or green-building codes, or an electrical or plumbing permit. Confirm scope with Building and Safety before work starts.
The statewide layers that apply everywhere
Several parts of Title 24 apply on top of the base building code and routinely catch projects owners assume are exempt: the California Energy Code (Part 6), among the strictest in the nation; CALGreen (Part 11), California’s mandatory statewide green-building code; and the accessibility provisions in Chapters 11A and 11B. Seismic design is built into the code statewide, and in fire-prone areas the wildland-urban-interface rules of Chapter 7A and Cal Fire defensible-space requirements add a further layer. In the City of Citrus Heights, the Building and Safety Division administers the California Building Codes with city amendments, publishing the design wind speed, exposure category and permit requirement lists that apply locally.
Who handles permitting in Citrus Heights?
The Building and Safety Division reviews plans, issues building permits and conducts field inspections to ensure compliance with local and state regulations on construction, maintenance and rehabilitation.
| Detail | Information |
|---|---|
| Authority | City of Citrus Heights Building and Safety Division |
| Serves | The City of Citrus Heights limits |
| Phone | 916-727-4760 |
| Counter | 6360 Fountain Square Drive, Citrus Heights |
| Code | Title 24 with Citrus Heights city amendments |
| Review | About ten days for the first set of comments |
| Licensing | State CSLB license; no local registration |
| Records | Permits issued since incorporation on the open data portal |
The Building and Safety Division reviews plans, issues permits and inspects construction for the City of Citrus Heights, working alongside the Planning Division and the fire district. Applications run through the city permit portal, where a new user creates an account and an existing user logs in to reach any associated project. Once an application is submitted it is reviewed and approved by staff before the permit can be paid for and printed, usually within a few hours on straightforward scopes.
Confirm the parcel is inside the city first; unincorporated Sacramento County and the neighbouring cities file with different authorities under their own amendments.
Permit types
Residential permits
Residential work inside the city is permitted and inspected by the division under Title 24 and city amendments. Added square footage, air conditioning and heating, hard-wired appliance replacement, attic and whole-house fans, carports, decks, detached garages, electrical circuits and panels all need permits, while plug-in appliance replacement without new wiring does not. Stand-alone solid-covered accessory structures above the published floor area need a permit.
How California contractor credentials work
California licenses contractors statewide through the Contractors State License Board, not locally. The CSLB issues three license types — Class A for general engineering, Class B for general building, and the Class C specialty classifications for individual trades — and a contractor must hold the classification that matches the work. A license is required for any project valued at one thousand dollars or more in combined labour and materials, and, in practice, for any work that requires a permit regardless of value.
In California the license lives with the state, not the city. The same CSLB license is recognised in every jurisdiction, so there is no separate local contractor registration to secure before pulling a permit. What the permitting authority does check is that the license number is active and carries the right classification for the scope, along with workers’ compensation coverage. Confirm the classification matches before filing.
Commercial permits
Commercial work goes through division plan review against the California Building Code, the Energy Code and CALGreen, with city amendments, and the same permit requirement list applies on the commercial side. It requires CSLB-licensed contractors and drawings stamped by a California-licensed architect or engineer, designed to the city’s published wind and exposure criteria.
Licenses, trade classifications and design professionals
Practically, three credential layers appear on California projects: a CSLB license in the correct classification for the contractor pulling the permit; the specialty C-classifications for the electrical, plumbing and mechanical trades; and, on commercial and larger residential work, drawings stamped by a California-licensed architect or engineer. Confirm what Building and Safety requires for the specific building before filing.
Citrus Heights permit costs and fees
Budget the city building permit and plan-review fees, separate trade permits, the state Building Standards and seismic surcharges, and any development impact fees. Costs vary by permit type, scope and contract value; contact permit services for a figure before pricing the job.
| Fee component | How it works |
|---|---|
| Building permit | Based on project valuation or square footage; set by the local schedule |
| Plan check | A percentage of the permit fee or a flat charge, at submittal |
| Trade permits | Separate electrical, plumbing and mechanical fees |
| State surcharges | Building Standards and seismic (SMIP) fees collected with the permit |
| Impact and school fees | Development impact and school-district fees in growth areas |
| Re-inspections and revisions | Additional fees for failed inspections, revisions and expired permits |
California layers two uniform state surcharges — the Building Standards Administration fee and the Strong Motion Instrumentation seismic fee — on top of the local charges, so they appear on permits everywhere. The building and plan-check fees themselves are local and change, and California law limits them to the reasonable cost of providing the service, so a figure from a neighbouring city is not reliable — ask Building and Safety for the schedule in force on your filing date.
Need a real number for a specific Citrus Heights project? Send us the scope, address and valuation and we will identify the authority having jurisdiction, the code edition in force and the fee categories that will apply.
Trade permits and who may pull them
Trade permits are separate from the building permit and, on projects that require one, generally cannot be issued until the building permit is in place. Each trade follows its own part of Title 24 — the California Electrical, Plumbing and Mechanical Codes — and is tied to a contractor holding the matching CSLB specialty classification, the same license statewide.
California runs the trades on one statewide license. Electrical work is tied to a C-10 contractor, plumbing to a C-36, and heating and air to a C-20, each licensed by the CSLB rather than the city, so the credential travels with the contractor from one jurisdiction to the next. What changes locally is the permit itself and any local amendments — confirm both with the authority that issues it.
- Electrical work follows the California Electrical Code and a C-10 electrical contractor.
- Plumbing work follows the California Plumbing Code and a C-36 plumbing contractor.
- Mechanical work follows the California Mechanical and Energy codes and a C-20 HVAC contractor.
Permit required
- Service installations, panel upgrades, new circuits, solar PV and EV chargers
- New plumbing, repipes, water heater change-outs, fixtures, backflow and gas piping
- HVAC installation and change-out, ductwork, venting and commercial kitchen exhaust
- Sprinkler, standpipe and fire alarm work on commercial and multi-family structures
Typically exempt
- Replacing a fixture, switch, receptacle or light with no alteration to wiring or piping
- Clearing a stoppage without replacing or rearranging concealed piping
- Filter, thermostat and routine component service
- Like-for-like appliance repair that does not alter the connection
How to apply for a Citrus Heights building permit
Only work within the City of Citrus Heights limits files with the division.
It sets out residential and commercial project types needing permits.
Speed by risk category and exposure category are both published.
California licenses contractors statewide; match the classification to the scope.
Plans, calculations and supporting documents go in as organised files.
Approval typically takes a few hours on straightforward scopes.
Review, corrections and what actually causes delay
In California, the first cause of delay is uncertainty over jurisdiction — filing with the county when a city should have it, or missing a local amendment on top of Title 24. After that come Title 24 energy and CALGreen documentation, a CSLB classification that does not match the scope, and, in fire or coastal areas, defensible-space or coastal-zone requirements that were not addressed up front. Build the plan-check time into the schedule and confirm the checklist with Building and Safety before filing.
Approvals do not stay live indefinitely. A California building permit carries a validity period and can expire if work does not start or stalls between inspections. On phased or financed work, keep the permit active with periodic progress inspections and confirm the expiry window before it passes.
Inspections in Citrus Heights
Where a permit is required, standard checkpoints include footing and foundation, framing, rough-in electrical, plumbing and mechanical, insulation and Title 24 energy, CALGreen measures, fire systems on commercial work, and final, with a certificate of occupancy before use. Attachments such as plans and supporting documents are submitted as properly labelled, organised and oriented combined PDF files, and inspection scheduling runs against the issued permit.
California inspections are keyed to the code editions in force when the permit issued, so the approved plans and any energy and green-building documentation need to be on site for the inspector to check against. Confirm the notice Building and Safety needs and schedule around its inspection windows.
Do not cover work before the required inspection has been approved. Keep the issued permit, the approved plans, product listings, Title 24 energy documentation and your correction responses available on site.
Citrus Heights permit search and official resources
Permit records in California sit with the local authority that issued them. Where the City of Citrus Heights Building and Safety Division is the authority for the City of Citrus Heights limits, it holds the building permit, the inspection history and the certificate of occupancy. If you are buying, refinancing or renovating, confirm that past work was permitted rather than assuming it was — and confirm the code edition that was in force.
Confirm the authority having jurisdiction and the local amendments first. California enforces one statewide code, Title 24, but each city and county adds its own amendments and fee schedule, so the requirements that apply vary by parcel. Confirm current requirements, fees and review turnaround for your filing date.
These are the primary sources behind this guide. Codes, fee schedules and procedures change — confirm the position for your filing date.
- City of Citrus Heights Building and Safety Division
- California Building Standards Commission (Title 24)
- Contractors State License Board (CSLB)
- California Energy Commission (Energy Code)
- California Department of Housing and Community Development
Frequently asked questions
Who issues building permits in the City of Citrus Heights?
The Building and Safety Division at the civic centre on Fountain Square Drive. The city incorporated in 1997 and runs its own division; unincorporated Sacramento County is a separate authority.
How long does plan review take?
The average turnaround for the first set of comments is about ten days, and review times are adjusted for the complexity of the project.
What design criteria does the city publish?
Basic design wind speed varying by risk category, and the exposure category that applies unless a different one can be justified, with the governing code sections cited.
Which projects need a permit?
The city publishes a list covering added square footage, heating and air conditioning, hard-wired appliance replacement, carports, decks, detached garages, electrical circuits and panels, and more. Plug-in appliance replacement without new wiring does not.
Do I need a local contractor registration?
No. California licenses contractors statewide through the CSLB; the license must be active and carry the classification that matches the work.
How do I run a Citrus Heights permit search?
All building permits issued since the city incorporated in 1997 are published on the city open data portal and updated daily.
Simplify Citrus Heights permitting with Alliance Permitting
Citrus Heights rewards using what the city has already published. The permit requirement list and the design criteria remove most of the guesswork before a plan is drawn.
Trusted by leading builders, developers, and national contractors — 22 years of filing in the jurisdictions we write about.
Contractors and builders choose Alliance for Citrus Heights because the work is done by people who have stood at the counter:
- We confirm the parcel is inside the city and route it to the division.
- We check the published permit requirement list for the scope.
- We design to the city’s published wind and exposure criteria.
- We submit combined, correctly organised PDF attachments.
- We track plan review, issuance and the inspection sequence through final.
Alliance Permitting is a permit documentation and submission company. We prepare your paperwork, file it correctly and coordinate with the permitting authority through issuance. We are not a contractor and we do not perform licensed plan review or inspections; that work stays with your licensed team and the jurisdiction.
Ready to break ground in Citrus Heights sooner?
Let Alliance prepare, file, and track your Citrus Heights permits while your crew stays on the job.
More California permitting guides
This guide is provided by Alliance Permitting for general information about Citrus Heights permitting. Requirements, fees, and procedures change; confirm details with the permitting authority before relying on them.